Easy Jib Roller furling D.I.Y. for $15.00

  Рет қаралды 10,546

Frankie Karons

Frankie Karons

Күн бұрын

Пікірлер: 22
@saskiaisskra3240
@saskiaisskra3240 Жыл бұрын
I think you are really an intelligent man and an exceptional sailor. Thank you for sharing.
@LITTLEDANCERSADHU993
@LITTLEDANCERSADHU993 2 жыл бұрын
Very clever, the plastic will not corrode
@jamesgould7217
@jamesgould7217 2 жыл бұрын
Hope I can find those pvc caps here in Australia!
@frankiekarons3106
@frankiekarons3106 2 жыл бұрын
I also made a rigid set using metal piping it's what I actually use on my vessel . the plastic is more of a inexpensive lake sailing rig .
@mushroomboozehound8375
@mushroomboozehound8375 5 жыл бұрын
good luck on your travels
@gregorycarr9345
@gregorycarr9345 5 жыл бұрын
Thank you friend I finally set sail on dec 1 2019 www.followtheblex.com for more details
@hgyonder
@hgyonder 5 жыл бұрын
Have you tried this furler on a boat?. For me,you forgot to connect two halves together ..There must be a kind of link between two parts so upper part will spin but will be connected same time.
@frankiekarons3106
@frankiekarons3106 5 жыл бұрын
I only used it as an example i did put it together as a back up ive made a rigid one out of galvanized pipe i have a 2 part video on that i believe its on my page . Roller furlly rigid around 20 dollars . Thank you for your queation and imput all my DIY videos are on followthebluex.com. peace
@mickhodapp1591
@mickhodapp1591 2 жыл бұрын
Hello excellent video! I tried but can't download any more of your videos. It says that the site can't be reached. I'd like to see how you connect the tubing that the stay would run through & the headsail would connect to. Do you think your system would work on a Mac 25 with a 130% genoa ? Thanks & I'll be looking forward to your reply I hope you were able to make your trip & that it was a success !
@frankiekarons3106
@frankiekarons3106 2 жыл бұрын
This plastic set was designed for up to 25 max also realize this is more of a low impact sailing like a lake . For my vessel I made a rigid one out of metal pipe same exact design that has been tested on a 23 oday out in open ocean waters . I will look into what's up with my channel. Honestly I thought nobody was paying attention so I stopped posting . that will change. Peace
@jason.b896
@jason.b896 2 жыл бұрын
So glue is holding all of the forestay load?
@frankiekarons3106
@frankiekarons3106 2 жыл бұрын
Yes on a small load boat for my small ocean sailed I used a husky metal pipe version. But for local lakes and light sailing the pic holds great . Peace
@SailingSarah
@SailingSarah 4 жыл бұрын
Does your sail have Hanks and if so did you do anything to protect from Hank rub wear?
@frankiekarons3106
@frankiekarons3106 2 жыл бұрын
No it doesn't I have a totally unique set up for mine being it's a specialty made boat and size .
@nicholaiivan491
@nicholaiivan491 4 жыл бұрын
how are u supposed to make it go back in with 1 line?
@frankiekarons3106
@frankiekarons3106 4 жыл бұрын
When sail pulls out it draws the line in and vise versa ive made mine for my boat but i ised metal pipe instead of pvc . There is another video showing that one
@dominicdisanto7892
@dominicdisanto7892 Жыл бұрын
😅
@zachwatt4344
@zachwatt4344 3 жыл бұрын
Did you make it around the world?
@frankiekarons3106
@frankiekarons3106 3 жыл бұрын
You are awesome for remembering . I have not made the journey but I have built a boat corona virus stuff slowed down the progress but I have done some work on my 9'7" boat and will be posting videos of my final test on ocean and hopefully a run from VA. to Fla. By September. Thank you one of the reasons couldn't make my first date was lack of support but the few of you that remember and follow help keep me motivated and on course . Thank you and keep a weather eye out I will make this journey. Peace
@J-Justice666
@J-Justice666 Жыл бұрын
If something goes wrong, how do you take it apart?
@frankiekarons3106
@frankiekarons3106 Жыл бұрын
Remember this is a lightweight application. However the only thing that is glued together is the internal pieces the exterior caps are held together with the eye bolts . thank you for the question and watching the video . I'll have more vids coming as I am back on track to attempt my goal . Peace
@tropicrec
@tropicrec 5 жыл бұрын
Yikes
Upgrading SV YOLOs Furler system...homemade
23:56
Adventures 4 Us
Рет қаралды 8 М.
Cheap Roller Furling 3 Day Sailboat Refit (Part 2) - Sink or Swim 148
13:52
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 3,3 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 7 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,1 МЛН
Sailboat DIY Low Cost PVC Roller Furler for Less Than $59!
11:05
Taylor Sailing
Рет қаралды 14 М.
How to install a Facnor Headsail Furler on your boat
11:54
SAILING into FREEDOM
Рет қаралды 40 М.
Installing a Furling Jib on an American Sail 14.6 Sailboat
10:30
Dorian Dinghy Presents
Рет қаралды 853
I never understood why you can't go faster than light - until now!
16:40
FloatHeadPhysics
Рет қаралды 4,5 МЛН
Main Sail Furler System DIY
3:28
HANDIY
Рет қаралды 12 М.
Many Moving Magnets Melting Metal
20:21
Cody'sLab
Рет қаралды 3 МЛН
Hoisting a Furling Jib | Sail Fanatics
12:24
Sail Fanatics
Рет қаралды 202 М.
Homeade Roller Furling
1:38
Phillip Smith
Рет қаралды 49 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 3,3 МЛН