Easy Reticulation Controller - Super Easy Upgrade

The Easy-Reticulation Controller is designed to be small, simple to use, low cost, versatile, customizable, and open source.
www.egglec.com.au/blank
00:00 - Introduction
00:38 - The actual controller
01:10 - Installation in an existing unit
01:50 - The Allbro ENL160806P Case
02:35 - Demo use of system
03:30 - What is looks like on Home Assistant Dashboard
07:30 - Close up look at the Easy Reticulation Control Board
12:17 - Connecting it and installing it to Home Assistant
15:38 - Conclusion and future plans
The reason I started this project is that I noticed that frequently, households have reticulation controllers installed that cost up to $300 plus and are packed with features, which is fine if you need them, but most people don't.
So over the past year and a bit, I have been working on this project, testing and trying and this is the result, a simple easy-to-use controller, that connects to Home Assistant using ESPhome, it will be a good basis for future improvement, and additional uses, including stand-alone features no WIFI required using the MAX31328 and MAX31329 real-time clocks.
For additional applications and uses please subscribe to follow along.
HARDWARE:
oshwlab.com/james_6977/easy-r...
INSTRUCTIONS AND YAML:
github.com/jeggleston1981/eas...