Easy step to make 45 degree offset cable tray/Pipe and Air duct

[@box4blox]

Use this simple formula to calculate size of cut to set in any cable tray: C/A = D B/D = E (size of cut in tray). A = cable tray width: B = amount of set: C = distance between sets on right angles: Eg. If you want to calculate how much to cut out of 300mm cable tray to set it 150mm over a distance 1200mm. Apply Formula: (C)1200 / (A)300 = (D)4 Size of cut in tray to set would be (B)150mm / (D) 4 = ((E) 37.5mm . Do the first set. place in position and then cut and set the second set to parallel.

[@eenergie1406]

Send us the drawing for this example

[@velusamypothiraj2300]

Too much confusion

[@box4blox]

To make a 45 degree set, just cut out a wedge equivalent to half the width of the tray. Eg to set a 300mm tray 45 degrees, cut out a 150mm wedge.

[@faizakram9433]

Very good explain pare

[@electricalinsider2536]

Pls subscribe pare thanks

[@shaheenshahbacha4943]

@@electricalinsider2536 helo sir. Plz explain. I have size 900 mm cable ladder. How can i make 45 degree upset. I need V cut cutting size.

[@pieterkruger4134]

Why 2.5mm?

[@joanofarc708]

Very helpful thank you

[@Sudds1888]

Only remove half of the V and the lip of the remaining V, when folded into each its much more sturdy. 👍🏻

[@velusamypothiraj2300]

2.5mm where u get?

[@VikashKumar-jh6lk]

Very good sir

[@myfingerpainting]

I noticed that the position of the “line of travel (starting point to end point)” of this 45-degree video is different from the position of “line of travel” in your 90 degree and 30 degree videos. Which of these videos is correct?

[@akbarbasha3392]

Thanks bro

[@6string35]

Where come the 2.5?

[@sureshkumarp2]

. yes i got it thank u.Expect 30 digree cutting video

[@RMC193]

Table 90 how to make please tell me

[@donthamizh3405]

Good job

[@electricalinsider2536]

Appreciate all your comments guys pls subscribe to my channel

[@Ak-se4dw]

I like this video

[@brahimabdelsadek9534]

Thanks a lot.

[@MAZPRAYITNOdesign]

Cool 👍👍

[@ericxandercustodio9627]

Idol saan nakuha ang 2.5

[@zixxer]

Please tell me how the 2.5 came from ? What do you mean by you got it accidentally in other comments.

[@forderno3736]

I agree sir..i cant understand how the 2.5 came from.

[@xijinping9320]

Forget this 2.5,, let us go for right method

[@zixxer]

@@xijinping9320 what's the right method pls

[@xijinping9320]

@@zixxer m.kzbin.info/www/bejne/q4HKinZsh9ipnrs

[@RaushanKumar-fe5cu]

Super

[@Meraj.786]

From 50 se we need farmula up to 800 hundred can you give

[@electricalinsider2536]

Pls watch and subscribe How to bend 90 degree kzbin.info/www/bejne/aaGVqaF9m9xnors

[@ramonmerino2286]

Kung sa straight duct gagawin boss, kung ang duct ay 300x200 paano ko ididivide sa 2.5?? Sidings ba ng duct na 200 o sa top and bottom na 300??? Salamat sana masagot..

[@electricalinsider2536]

Depende sa offset sir kung riser offset sa lapad nung ducting,kung side offset sa side naman siya

[@zahidashraf289]

Sir i need 30degree and heigt 20 cm measeremant please.

[@electricalinsider2536]

You can watch my videos on 30degree i uploaded already thanks

[@shaheenshahbacha4943]

Helo sir. I have size 900 mm cable ladder. I want to make 45 degree upset. I need V cut size? How much?

[@electricalinsider2536]

The v cut would be 360mm

[@manimanic9928]

Family video iruntha potungal

[@arnelabrantes6750]

Sir zion lahat po b cable pwed yan computation pati sa 45 offset video mo

[@electricalinsider2536]

Applicable sa lahat yan sir kc trigo yung ginamit nating fomula thanks pls subscribe

[@arnelabrantes6750]

Sir zion pano naman yung offset sa palapat n tray 300×100 cable tray tray ko 45 offset nyo galing

[@electricalinsider2536]

Sir anung ibig sabihin mong palapat side offset ba you can apply same formula it only varies depending on the size of cable tray

[@Stephenmatthewtilosarcilla]

12 12 kpg 300 cable tray

[@xijinping9320]

Where you get the 2.5mm

[@electricalinsider2536]

I just accidentally use it as a constant number to divide every number to get the value of 45 degree

[@myowinhan502]

@@electricalinsider2536 Please Sir i want to 30 degree. How to get Constance number.

[@myowinhan502]

Constant number Sir

[@electricalinsider2536]

@@myowinhan502 for example you want to offset 20cm height just follow this simple formula 20cm÷sine(30) and you will get the travel or hypothenuse

[@xijinping9320]

100 mm tray 45 degree offset you marked 40 mm 100 mm tray 30degreee where you can mark?

[@sugrimchauhan3364]

Sir hindi me vidio banaiy

[@aboarqam6500]

Good sir

[@arnelcocharo6828]

Saan galing yung 2.5 mm boss. Sa 45 degree ba yan

[@electricalinsider2536]

Constant number yan sir thanks

[@ramonmerino2286]

Anong constant

[@budhhiram1661]

please sir teach me how to correct measurement how to take 90 bend

[@electricalinsider2536]

I made a video on 90 degree cable tray pls go to my channel and watch it

[@makoymacaraeg2560]

Bakit poh ung sa 10 height ninyo na coputation jan ung 28.28 san poh tala ung magccmula sa gitna poh ba ng v shape o sa gilid ng v shape

[@electricalinsider2536]

Sir 20cm yung height kaya 28.28 yung travel niya meaning pag pinutol mo yung v shape marking mo at binali mo na siya as 45 degree ang magiging height niya ay 20.tungkol naman kung saan ka magsisimula tignan mo yung markimg sundan mo lang yung sa marking sa video sir

[@mansoo3750]

set= Travel/Sin45 set= Ren*tan45 Ren= set*tan45 Ren= Travel*sin45

[@jomaribocalig2000]

San galing ung 2.5 mm???

[@electricalinsider2536]

Sir constant number natin pang divide sa size ng cable tray para malaman yung v shape cut ng cable tray

[@প্রবাসকষ্টের]

Nc

[@AkashTiwari-cs3vo]

make 90 degreee video

[@cromwelalbaracin1639]

pwede sa formula naman conduit ang ituro mo sir nextime

[@electricalinsider2536]

Pag my time sir busy din kc ako sa trabaho,pero tip ko lang pwde mo din yan magamit sa mga small diameter na pipe

[@electricalinsider2536]

Sir nakapag upload na ako about sa conduit just check my video thanks

[@josegabuat9670]

Sir bakit ung offset mo na 30 degree at ung 45 degree ay mag kaiba ung formula na ginamit mo Sana masagot mo sir kc nasa fabrication ako Ng electrical ngayon malaking tulong Ito sakin pag naituro mo xakin ung madaling formula salamat sir good bless

[@electricalinsider2536]

Sa angle lang sila nagkaiba sir kaya for sure mag iiba yung travel or hypothenuse ganun din sa v shape cut magiiba lalo na pag iba ibang size ng cable tray gamit,pero yung formula parehas lang (height÷sin(angle)

[@eenergie1406]

100mm÷2.5 100 is width or height of the cable tray

[@electricalinsider2536]

Width of tray

[@electricalinsider2536]

You want to make an riser ofsset well of course you need the height of your tray

[@eenergie1406]

@@electricalinsider2536 link video for riser ofset

[@eenergie1406]

Please

[@electricalinsider2536]

Check my youtube channel pls,cable tray and piping playlist thanks

[@thimceypatiu7874]

Just multiply it by .4 Ex.100x.4=40

[@thimceypatiu7874]

Yes it is.., using .4 we can call it short.cut for 45degree.. but we can also use 1.6

[@visnu0045]

constant for 45 degree is 2.5, what is the constant for 90 degree sir?

[@HeriYanto-qh2hc]

Bahasa Indonesia bang

[@fadiessa1256]

Hello sir Thank you for the information, but for now I do not understand an example: We have a tri cable size 600 * 0 10 mm opposite height 20 cm The angle is unknown to me, how can I find the data Can you find me a solution

[@electricalinsider2536]

I reply on 1 your question pls follow that one i already explained it

[@fadiessa1256]

@@electricalinsider2536 Where is it

[@makoymacaraeg2560]

Pwede poh 15 height naman poh my face book page poh ba kau

[@electricalinsider2536]

Pag 15cm ang height sir madali lang po yan 15cm ÷ sine (45) kung 45 degree siya yun yung magiging travel mo

[@mansoo3750]

40=tan22.5*100

[@peerawitelectricpower-high4294]

41.42135623731

[@roelnarbuada6078]

Bisayain mona bai Mahirap magkalisod lisod sa English

[@mansoo3750]

C=20cm/Sin 45 = 28.28cm

[@rayarguelles2038]

Tagalogin mo nalangan