Easy Water Proof Ranger Cloak!

[@BSpinoza210]

A note on the flame stuff, the cotton acts as a wick that draws in the beeswax and paraffin like a candle, so it'll burn more slowly as it melts and draws in the wax to drive the fire. Upside is you're wearing a slow burning candle, the downside is you're wearing a slow burning candle.

[@zacharylavoie6889]

I think people get waxed cloth and oil cloth confused. Oil cloth is quite a bit more flammable than an un-oiled equivalent, but waxing a cloth would actually make the wax burn before the cloth, acting like a wick. Not necessarily a good thing, but doesn't make the cloth any more flammable.

[@SkillTree]

So I have become a human candle! Lol.

[@kevinfelton689]

Townsend has a video where they make traditional oil cloth using acetone or turpentine (I forget which one), and yeah it's flammable as hell, don't wear that stuff.

[@nyetloki]

Given of course, if you talk about old oil cloth instead of time modern meaning of laminated vinyl backed fabric. PVC melts instead of burns.

[@Thalanox]

@@SkillTree Fun fact: When some people try to dispose of murder victims by setting the corpse on fire, the bodies literally become like a human candle! The heat from the flames melts the body fat, which is then transfered to the burning part of the cotton clothing. At least one murderer has been caught from this, because the fire gives off very obvious black smoke.

[@Suillibhain]

Please be more accurate. It depends on the oils and fabrics used. Tincloth is a combination of oils and wax. Not all oils ignite easily, others ignite with little help. Also if you use say wool wich is already fire retardant, and inpregnate it with lanolin oil, it can ignite, with a blow torch, for a while... that said using linseed oil on cotton rags left in the sun spontaneously combusts. Fear mongering for the sake of fear mongering gets no one anywhere, and keeps people from using useful tools out of irrational fear.

[@traveling47]

My wife and I made a couple ruana cloaks a few months back, they are freaking awesome. I used mine most of the winter. I think I might need to make myself another one for warmer weather. Great vid.

[@the.reel.mccoy.]

It'd be really cool to see a cloak designed from the Ranger's Apprentice.

[@RidgeBoi]

That's the main reason I clicked this vid lol. Thought it was about that kinda Ranger's cloak.

[@josephburge168]

Just ordered my recurve Hungarian horse bow from Amazon lol gonna make me a saxe a throwing knife the double sheath however I decide to make it and the quiver. Just need the time to light the forge

[@wildcardproductions6010]

Someone else who's heard of Ranger's Apprentice!

[@manteltwinkelwink2271]

Re-reading that series right now! That would be amazing.

[@truthhunterhawk3932]

Camouflage, yes!

[@walkstheman98]

Its strange that people worry about these types of clothes being flammable, when the clothes most people wear everyday/while camping is made of plastic and will also catch fire and probably melt into your skin haha. If it's not a problem with normal clothes, I think its fine with these as well

[@asmodiusjones9563]

He should test it by building a camp fire and putting cedar branches in it, then put the cloak next to the fire to see how it fares against popping embers. Regular nylon clothes melt like crazy, they’re terrible.

[@spacehooliganzack7429]

Most clothes are less loose and billowy than this cloak. It's shape gives it greater access to catching fire in the first place than an ordinary pair of pants for instance

[@walkstheman98]

@@spacehooliganzack7429 true, but I've never really heard of people worrying about cloaks made from other materials the same way, which is why I found it weird.

[@hildolfrdraugadrottin7279]

Strange people are the best kind.😊

[@marioslani5874]

Qà

[@atzayacatlsalazar6720]

4:05 A fabric pizza-cutter? What a time to be alive :D

[@midnytespectre2952]

Literally just sat here and did this with my son. We coincidentally had to two of those same drop clothes from HF,and I said hey,let's make Ruanas. Lol. They came out so good. We still have to sew them,but I'm gonna let mine fray a bit for that worn out look. Thank you so much. He's 7,and is now so obsessed with his new Ruana cloak and the rennaissance faires. 🙌🏾🙌🏾🙌🏾❤️😃

[@MrGoatflakes]

3:16 "one of the more versatile cloaks" _laughs in great kilt._

[@SkillTree]

LOL. It is true. The great kilt IS king from what I have seen. Really cool piece of kit.

[@thomphan9518]

insertmeme: why not both?

[@MunitionsDudTester]

If you ever wanted to do a "winter version" of this, USGI wool blankets are pretty cheap AND already green :)

[@k98killer]

Where do you get them? Edit for clarification: I have never seen them for cheap; everywhere I've seen them, they have gone for $40-100 each. Fleece from any store that sells fabric is a more economical way to go about it. $3-4 per yard, and you need just 2.5-3 yards. Measure, cut, wash, dry, done.

[@RealAmericanSanta]

@@k98killer got mine from goodwill for $2 but it was a kind of worn bluish color. It was probably a much richer blue, but made out of the same fabric

[@RealAmericanSanta]

@@k98killer got mine from goodwill for $2 but it was a kind of worn bluish color. It was probably a much richer blue, but made out of the same fabric

[@Davmm96]

@@k98killer 40 $ for a wool blanket is still good. Not everything has the same value as polyester or cotton, which are very cheap materials since one is made of plastic and the other is super mass-produced. Fleece is poly and/or cotton just manufactured differently. If you want a summer cloak for those fresh night, fleece will do the job. Thing is, wet/humid cotton and polyester aren't gonna keep you warm and polyester smells bad after one day. One thing you could do to mitigate that is have a 2 layer cloak (fleece lining and waxed canvas outer). That could be a super sweet setup if you just attach them with buttons as you could wear one without the other.

[@k98killer]

@@Davmm96 I have recently made both a fleece ruana and a waxed canvas one. I initially thought I'd wear them in layers, but I didn't consider using buttons to hold them together. I imagine it would require a lot of buttons, and I would have to make a second fleece ruana to match the dimensions of the canvas one since mine are different. But so far, I just wear the fleece one when I'm cold and the waxed canvas one when it's raining.

[@sods2731]

Wool is more naturally waterproof, especially in a more raw form with the natural sheep tannin's and is also quite a bit more fire-resistant. You can get some pretty light wools aswell, it's not a winter only material. Though the issue then is price, wool is usually quite a bit more expensive than other (specifically) natural ones with few exceptions, probably more-so in the US where you have far less Sheep than the UK for example

[@DrachenGothik666]

Sheep don't produce tannins. Plants do. A sheep's skin oils are called lanolins.

[@travisbdub4952]

Also wool will keep you warm in the middle of winter outside even when the wool is wet. Cotton will make you freeze to death.

[@shoopmahboop1374]

I wanna get a huge length of wool cloth to make a great kilt

[@anblueboot5364]

@@shoopmahboop1374 how did it got?!

[@keysersoze3427]

Saw a good video by a guy called fandabadozie that covers this with Scottish traditional clothing. Good wool witha tight weave kept highlanders dry.

[@shadow_thiy]

I was recommended your channel by Larp Shire as to look into what LARP is after I saw their video on the Reckoning. Tbh it sounds pretty neat so tips and tricks like this are both interesting and informative. Though from what I've seen from their official website the Rivlans aren't half as cool as the Hadrians. Maybe something that could be seen for a future idea for DYI larp stuff, perhaps a sack or container that you could carry on your person as a first aid kit. Outside of a self sufficient ranger needing to always carry an extra bandage in case of danger, you never know irl if you need to get some immediate help in case of an accident in the woods. One should always be prepared.

[@SkillTree]

I LOVE Larp Shire. Such a great group of people. Thank you for checking us out. I love this idea! Something I will add to the list for sure!

[@Doughy_in_the_Middle]

My son and I have had this plan for a couple of years now, the only difference being, we want to make them out of wool army blankets. They're near-water proof, and better against the skin. Also, if we were to make a more lightweight summer cloak, we were thinking of using NightHawkInLight's silicone sealant. It's basically just diluting standard silicone caulk like you'd use around a sink / shower surround, and soaking the fabric in it after dying. Not exactly period-authentic, but still....definitely waterproof.

[@Lukiel666]

For a heavier multi function cloak, the harbor freight tarps you used for a tent. Make a half circle hooded cloak that goes right to the ground. Now the multi function bit. Crouch down and it covers your feet and the natural folds make you blend into the woods, camouflage. Cut some 6' poles, stick them in the ground forming a circle that comes together at the top, drape the cloak over it, emergency tent. Very ranger-ey.

[@hyperguyver2]

I would argue that the better option would be a wool fire blanket. They're cheap, highly breathable keeping you cool in the summwr and warm in the winter, wool is naturally water and fire resistant, and with a penannular broach can be styled well over a dozen ways. I've been using one with viking kit for years as it's close to what they would be used for historically

[@Lukiel666]

@@hyperguyver2 Sounds like my Scottish great kilt. Except for the cheap part, sigh.

[@michaelheurkens4538]

To help with applying the wax, if you heat the canvas with an iron or a heat gun/hair drier FIRST in small areas, the wax takes longer to cool and allows for better saturation. Personally, I like to use a heat gun, the kind that gets hot enough to strip paint. Warm the area of canvas so it is hot to the touch, apply the wax and continue to heat the area already waxed for the most absorbtion of the wax into the cotton fabric. Repeat as necessary until wax is no longer absorbed. Good luck! There are more modern ways to achieve "waterproofing" using silicone caulking and acetone instead of bees' wax mixture as this is very expensive where I live. Cheers.

[@JP-WC]

I made a post-apocalypse coat out of the exact same fabric. I was looking at canvas like materials & was like "This drop cloth is cheaper than even thinner fabric at the fabric store & I don't care about the extra seam that is down the middle." I did find that the fabric will separate away from seams or stress points as the weave is not as tight or strong as it first looks. I solved this by using glue & sealant along seams to lock the weave in place. For the weatherproofing I used a light coat of spray rubber on the shoulder areas & along the bottom. This helped with keeping the fabric from separating along the shoulder seams & stress points, made the wettest parts extra waterproof, protected the bottom edge from wear, and helped the esthetics I was going for. Then I just used a couple cans of outdoor fabric spray over the whole thing.

[@Jaeler9]

Awesome idea and vid! Thanks. Now if only my harbor freight will finally stock their canvas tarps… Side note: I’d suggest linseed oil and turpentine to waterproof canvas (for long term waterproofing) but it does require some curing time outside in the elements. Townsends did a wonderful vid on waterproofing canvas. The problem with beeswax and paraffin is that one (flammable test) it’s a sustainable burn. Think candles. And two as you wear it or use it that wax will wear off (it’ll take time so for one event probably okay) and if you’re wearing it that wax will seep into all your other textile clothing. Also please don’t put waxed canvas or Heavily waxed clothing anything into your washer and dryer. You will clog your drain and any waxed lint is SUPER flammable. And yes I do know that Clever washed and dried it before waxing. It’s a future reference kinda thing.

[@cameronflack2254]

For a "slightly" less natural way of waterproofing that isnt waxy, nighthawkinlight recently did a great video using silicone caulking and a solvent (mineral spirits i think) to make sort of a rubberized canvas. Check him out if you havent already

[@Jaeler9]

@@cameronflack2254 interesting! Thanks!

[@SpamMusubi308]

Also check out the painting supplies section in your local DIY(Home Depot, Lowe's) store and Walmart Superstores( usually best price) for canvas/cloth painting tarps

[@1worldma]

Very cool video! A little heads up from a guy that has been running a waxed jacket for motorcycle adventuring for many years - if you hot iron the wax too much, it will soak into the fibers, but leave the surface exposed / relatively unprotected. Wax needs to sit on the SURFACE of the cotton cloth to prevent wicking.

[@michaelyoung7261]

On the subject of burning the waxed canvas. You basically gave a candle wick. Candles really burn the wax, it’s not the wick that gives it fuel. The wick just provided the flame a spot to chill as it slowly eats the candle

[@SkillTree]

So, what you're saying, is that I am basically a human torch now 🤣

[@ordnaelshideout]

I've already got a canvas cloak for my character, now I'm slowly assembling a whole leather armor set in order to return back to LARPing in the coming future!

[@SkillTree]

I hope you show your whole kit when you get it together!

[@timothynaquin8899]

I made one of these cloaks with a wool blanket. I have a great improvement to the cloak. The plan is to use 4 x 1.5" x 1" pieces of leather and cordage as a closure system for the collar. My plan is to sew 2 pieces of the leather straps about 1/2" or 3/4" in the corner of collar and center line on both sides. Punch 2-4 holes, I'm going to use three in the center, to lace the cordage how you like to keep the cloak closed at the collar. This will keep the cloak from getting in the way. Now when tied, I'm right handed, so I take the left side and secure it with a belt keeping the edge just right of center pulling it flat across my left side. Now I can drape the right side over my left shoulder and also use it as the hood. I found doing it this way the cape won't interfere with cross drawing my sword and if I use a shield the cloak will now disguise where my drawn sword is when in battle. Also I can draw a dagger with my left hand covertly for dual wielding. When not secured it'll add a pop of color and you can fold the ends open kind of like a suit coat does. With the one side secured in the belt and unlaced, you can take the right side off your shoulder and drape it over your right arm like toga, lol. For the archers out there is another mod that could help y'all out. Take another two pieces of leather and sew it on the back of the cloak slightly above the waist and left hip area. Cut a slit wide enough to get your quiver sling through. This will allow you to keep your cloak still drapee and keep your quiver secured to your back. This will allow you to draw and fire your bow with no to little interference from the cloak. You can also do this if you like to carry your sword on your back. For the duel sword wielders out there just take this mod and add one on the right side as well to secure your scabbards. I apologize if this post is a little long. I'm just trying to make sure you can picture what I'm picturing by being as discriptive as I can. Thanks and sorry again... Party on

[@blaisetheginger]

Made one of these from wool after seeing this and living anachronism videos about ruana cloaks. Now I'm working on a duck cloth one for the warmer season. So much hemming!

[@codykelley5351]

"Damn you three dimensions!" Not gonna lie, I almost spit out my drink! lol

[@coolvideos605]

If you are really concerned about flammability and fire you can buy fire retardant spray for fabrics. We use it when making our own Guillie suits. Keeps the chance of combustion down.

[@Chuklz70]

I also ran through the woods as a Ranger in LARP, used the inspiration of RobRoy movie (it was new then) to make a great-kilt which is a style of kilt, the full length version not the little skirt everyone calls a kilt. When you want a cloak or hood you unbind the length over your shoulder. Slept in it outdoors once in an overnight event. Miss it now that I’m talking about it.

[@k98killer]

I just made this out of fleece without any waterproofing or sewing. ("Just made" meaning "finished a few minutes ago.") It is basically a warm, comfy blanket that will stay with me on cold mornings around the house, plus no sleeves means no armpits, so it won't need to be washed nearly as often.

[@benkayvfalsifier3817]

That is a great, practical idea.

[@k98killer]

@@benkayvfalsifier3817 just proved its usefulness stargazing outside in the cold wind. Can also just use it as a blanket. Quite happy with it.

[@timothyburrows9622]

For our friends outside of the US two yards is 183 cm.

[@MaddiesPearl]

The weathering effect after the wax is on is really cool looking!

[@KristinMoran]

If you have enough fabric leftover from the off cut, you could add a hood. I do love a ruana for its versatility.

[@williamblankenship8209]

It’s so funny that someone else found a similar use for this dropcloth. It’s what I made my complete Obi-Wan Kenobi robes out of. Also this build looks great!

[@anmkohaku0077]

That cape design is one of my favorite patterns!

[@TheStigma]

An alternative to using wax is to use silicone (just cheap silicone caulk will do) diluted in naptha (ie mineral spirits). Nighthawkinlight has a great video on this. The result is a bit heavier, but it also strengthens the fabric a lot. Waterproofing is unparalleled - and super stain resistant also. Silicone is pretty amazing stuff. But I have to say I love the authentic looking fold-lines you get from wax for this type of use. It really puts it over the edge for a cosplay.

[@isaacschmitt4803]

My fiancée and I are going to RenFest this weekend and we're wrapping up our costumes this week. She's doing a fairy (more Sidhe than Tinkerbell) while I am doing a bard with some influences from her costume. My sash is going to be made from the same material (read leftovers) from her skirt, and we made matching flower crowns the other day. I made a frog for my sword earlier today from leather and paracord, and we're going to do my ruana cloak in the morning since there's a chance it'll rain while we're there.

[@dvldgz6306]

Silicone caulk dissolved in acetone is a modern way to wax cloth. Night hawk in light did an amazing video on it. It won't have the marble look that wax does so it's an option for people who don't want that

[@xoindigold]

About to make these for my partner and I, so excited!!

[@josephowens4654]

Borax is a flame retardant that can be mixed with final rinse water of dying process. While wax will still light and wick actual burning of cloth should be slowed greatly.

[@MakerCuisine]

That cloak is amazing its so cool, i don't even larp and i want to make one. But I'm already thinking of an idea that would make great use of this. Thanks kit

[@HenryCabotHenhouse3]

For waterproofing one might also try the old timers universal natural waterproofing paste: equal parts bees wax, linseed oil (boiled), and mineral spirits. It can be rubbed on or melted and soaked in and wrung out. Works on virtually anything. One can also use a hair dryer to melt in the wax if one does not want to risk ruining an iron.

[@nyxstyx388]

"Should have done this outside" *Strikes second match anyway*

[@colonagray2454]

I did something similar in Arizona heat on a hot day and let it cool over night. I was just making a large camproll though. This is way cooler

[@alexandermoran7783]

Man this channel is the best I go through out stores all the time like if I did this to it it would be perfect for my cosplay

[@alexandermoran7783]

P.s. I think there are fireproof sprays for clothing I think there is don't quote me on it unless there is lol Yes there is

[@LTEK4NZ]

The waxed cotton will burn for longer. but the upside is if you put out the flame the structural integrity will still be there because the wax burns off first.

[@instant_soop]

I really like the idea with the wax, but id use the wax for my barbour jacket. Wich is just a little more expensive, but its way easier to work with

[@BumbleBauz]

This is so cool! I once saw a water proofed viking hood, super cool. Now I can make one myself and can have a cloak too 😍👍 thanks kid!

[@jolla9963]

Great thing for camping or fishing, gunna make one of these and store it in my vehicle.

[@emilyp.4100]

I have also seen people using hot-air dryers (household hairdryers or those used in construction works) instead of "ironing" wax into the fabric - but they do literally the same thing with the same result :)

[@Doomnationready1]

This was pretty awsome man, I am glad I stumbled upon your channel. 🤣🤣🤣 killed me with "don't be stupid"

[@bear788]

Very cool cloak, I love the way you cut up wax I never thought of a chisel, it looks much easier than the grader I normally use. next time I wax bottle tops I'm going to have to give that a try.

[@Mrsmeigor]

wow, thank you! This looks really good and easy to make. I will definetly try it!

[@dungeondesigns104]

This gave me an idea to make a green waxed canvas satchel. I know what my next build video will be!

[@SkillTree]

I will 100% tune in for this!

[@GarrettMoffitt]

I'm going to make a few of these. I really wish you had links to the supplies so you could wet your beak on the purchases.

[@doloressims5677]

Harbor Freight is the go to store for LARP and RPG... so much good stuff.

[@dwwolf4636]

The other method is diluted boiled linseed oil ( Watch townsends ) But that stuff burns fast. And dont bunch it up while drying.

[@kstarwalker4905]

Thanks for the step by step guide in making a ruana cloak I'm making a Ruana cloak that's reversable. As for waterproofing, I have waterproofing spray for leather, shoes, and all kinds of other fabric.

[@CrackedCandy]

BTW, loved how you used the horn mug for looks and never sctually took a swig. Those just seem off with the texture on the inside.

[@The-Anathema]

You could also just sew a hood onto it which would make it even more versatile (you can drape it in all the same ways as before but with a hood as well, the hood would otherwise use up one of the danglies). Though a hood isn't that hard to add, it's just 2 thirds of a bag so it can be left as an exercise to the reader.

[@54Dcool]

While an exercise is fun and all, do you have any suggestions for adding the hood? Very new to all this but looking to make a ruana with a hood

[@The-Anathema]

I don't have a pattern on hand, but the same channel made an assassin's cloak as well, that one has a hood, you should be able to get some inspiration from that.

[@jedhaydney4176]

You've got alot of charm and character!

[@jonanderson3050]

It was great fun watching you running around the campsite like a giant torch! I kid, I saw no issues with flammability when you were wearing it. I also didn't see you being an idiot around the campfires, so there's that too! I think I'll make one of these myself.

[@the1band1wagon]

oh no, looks like I have to make one of these as one for my normal wardrobe and one for my werewolf red riding hood that i've been thinking for a few years needs a hood/cloak update. The bees wax was interesting. might be worth trying it for future projects

[@DisturbedGeneration]

When you said "you can wrap a belt around it and make it look like a tunic" You made me realize, darth vader wears a ruana like that under his shoulder pads and cape.. I didnt even realize he wore one until now lmao

[@Ozarkwonderer]

nice. i would've gone with four foot front and back just for more coverage and a bit of bushcraft versatility

[@JadeCaro]

I don't know why this was recommended to me, but this is really cool

[@kastheone]

ohhhh finally after countless of videos i found a real easy design that i like!!!!

[@helelcifer8695]

The wax- idea is wonderful. I guess, i will try that on my NPC- Larp mantle

[@eazy8579]

Tip from the re-enacting community; tight woven wool is EXTREMELY waterproof, not quite as good as oiled or waxed canvas on its own, but wool on its is water repellent, and if you have a local fabric store, it’s pretty easy to get a hold of, and it’s very easy to wax or oil, and it will hold it very well.

[@Yomirkr]

Especially if you use vadmel/Wadmal

[@ArtAntiDe]

4 foot = 122cm . 12ft = 366cm . 1yard = 91cm... Actual cloth needed: 122cm (shoulders) x 182 cm (down front & back). Hole for head 5 to 7 inches = 13cm to 18cm. (note for myself and other metric poeple) btw, from the 4ft * 12ft cloth you could actually make a second cloak, right?

[@georgecuyler7563]

You can also use plumbing wax for your toilet, which is less expensive

[@Sphendrana]

Green is always best team, even when they win. They're just there to have fun with everyone else.

[@eldrenofthemist2492]

Not even one minute in the video. and I already like this guy. XD Subscribed.

[@vukkulvar9769]

I would like to see a cloak that cover everything : the head, arms, back and front of the body.

[@dragonscaskentertainment5139]

Really dig this alot! Great work man!

[@SkillTree]

Thank you! And thank you for being part of tge Fam for so long. I really appreciate your support!

[@dragonscaskentertainment5139]

I love the energy and the idea I've just learning! I'm looking forward to seeing if you do anything with laser cutters. I love mine!

[@Garidoes1]

Okay awesome! I've been trying to figure out how to wax my soviet Plash-Palatka and this looks like a really effective method! Thanks so much!!

[@Alagachak]

That came out nicely! :D I was thinking about doing a waxed hood(...the kind that goes over the shoulders) from seeing some video about medieval plastic wrap (thus learning about waxing cloth being a thing, yep I had missed that) then seeing about medieval hoods. Putting two and two togheter I went like '...linen on the inside... wool on the outside... but shouldnt wool be inside, is what we do in army to keep warm... soooo...if we wax the linen and put it outside we get water resistant super hot thing. ...still got to do that one, thanks for reminding me. Stay safe happy craftmonkey!

[@nyetloki]

Wool is already water resistant

[@shannonbailey4317]

I like to see you make a Viking arm ring or just a arm ring in general like I think you could do pretty good at it man

[@TantraJames]

i love this. exactly what i was wanting. great vid too, very entertaining. 🤙🏼

[@ICU2B4UDO]

Instead of Parrafin wax you could of used Microcrystalline wax and added linseed oil and denatured alcohol to help it soak into the fibers deeply then let it air dry for a couple of days to make sure the alcohol is completely gone...Then use the iron like you did...It'll be completely waterproof where you could be in a downpour and the water would run off like glass...

[@leelee7731]

Green sheet. Soak in naphtha mixed with silicone gel. Waterproof sheet after dry

[@madcow3k]

Fantastic video! I've actually always wanted to do this, but never did. You make it look simple enough to try. Thanks! And HAHA you used your wife's GOOD scissors!!

[@thommuylaert7636]

Love your channel, inspired me to start making things just finished my ranger cloak or rouna cloak and made a small leather bracer. Also found out wood stains works for staining leather somewhat decent. I would like to see you make ink.

[@brandenforrer2603]

Should have used all natural walnut husks makes the best browns

[@sashmiel6566]

This is amazing, I am glad I stumbled across this one.

[@SkillTree]

I am glad you did too! Welcome to the channel!

[@KittenSprite]

you should try dyeing it like people would in medieval times

[@LivingDeadward]

Thank you, very informative! You even managed to sneak in some Firemaking XP.

[@ninjaslash52_98]

i am just looking for how to make a cloak but found this channel. i even watched the whole thing and it has nothing to do with what i was looking for XD

[@kensmith5694]

If you promise not to eat it, before you add the wax, soak the cloak in a borax water mixture and then allow to dry. This will make it resist burning.

[@jwolfe1209]

For rinsing the dye, why make more work? Do one rinse to get out most of the salt, then spread it out on the lawn and use the hose. It's already green

[@binglechingusmingis1457]

This video series gets me exited to go LARPing so freaking much. I really do hope you get some cool footage from the event.

[@keithwhitford6715]

Great video. I’m going to make one myself. Best part though was how you said don’t be stupid. 😂😂

[@Leonbartolome]

Looks awesome!

[@ColdOsburn]

I did something what you did but instead of make it wrap around me I made it into an actual hoodie and cape I also attached a bunch of fake branches and leaves since I have a character who is a rogue druid who like hiding in bushes and poking people doing poison damage

[@Pedro8k]

Actually a pure wool blanket it quite waterproof as long as the lanolin as not been washed or processed out

[@Vaportiple]

In other words regarding wether or not it’s flammable, just be perceptive and spatially aware of your surroundings, you won’t catch on fire AND you’ll be better prepared for goblin ambushes. You wouldn’t stand in a flame without the cloak, you’re not going to stand in the flame with it

[@mmcgartland2095]

I was going to suggest dye then over dye but color actually works

[@SteepMountainGames]

Damn you 3 dimensions! 3:47

[@meursault7030]

Why's he moving like a fucking Dreamworks animation? Gives me the ick.

[@ArkLord001]

Paraffin wax is HIGHLY flammable. I don't recommend you go near any open flames or sparks in that unless you want to look like a crispy critter after being through a forest fire Ranger.

[@kredik5796]

I would have liked to see how water repellent the cloak is.

[@wildside636]

Wow. Im loving the new videos, keep it going

[@kingmasterlord]

take silicone caulking and dissolve it in hot water then soak the cloth in that hot water

[@Raganui]

Need something to keep the hood down, but it looks cool. As for the burning, well, it acts like a candle and wick. Wax is this added fuel, but slows the burning so, yea.

[@Detman101]

I recently made one of these following your instructions. Canvas works PERFECTLY! I would like to ask what "Sewing Machine" you use? I see its a "Singer" brand...but which model? I want to buy the same one since it works for you. I had to hand-stitch my entire cloak and it took 3 days lol....