FHSM 505 Mini Sewing Machine Frequently Asked Questions

[@carolevans5285]

I just wanted to give you a big thank you. Iv had this same little machine in my loft for years. Tried it once had no clue what I was doing. I'm 58 years young and u think by now I would no how to use a sewing machine. Ask me to hang wall paper I'm on it lol. So I keep seeing these on amazon and ebay and got mine out of the loft. It looks brand new box a bit dusty lol. I remember I just had no clue how to do the bobin, was at it all night when I first got it. Put it back in the box. Only to see the light of day 15 years later. I spent about 10 15 pound on it then. Its identical to yours. So u have shown me at last how do do the bobin. I'm so proud of myself😂🤣😂 I haven't done any sewing and want to learn more about the needles and stuff and that plastic bit I don't have that. I have a needle and I no its not been used but I would prefer to no how to do these things before I get started on the sewing. Then if I mess up I no what's hat on the machine. I don't have the booklet it came with and the electricity part it says on the box order separately. So just batteries for now. If I can master the mechanical side of a sewing machine then I will feel safer starting something if I mess up. I'm quite proud of myself .you have showed me how to wind the bobin how to set that all up bring the cotton through and change a needle if necessary. You are a great teacher. Kids will catch on quick to your teaching was . I should if payed more attention in sewing class, I regret it now. Poor lady she was really clever looking back now. Still your never to old to learn a new skill and the day I can design and make my own cloths I will be my own master. Its something I have always wanted to do. Once I master the technical side do a few things on this little sewing machine I'm moving on up to a bit better. Any ideas what sort I should move up to. Iv been checking out the brother LM-2421 it's not the best but its a step in the right direction. Secondhand. That's all I can afford. Many thanks for all your help . You sound such a lovely calm teacher. ☺ I shall keep watching you. You have made me at 58 feel proud of myself. It means so much to me. ❤

[@m.qchannel1]

If you buy new sewing machine send me the old one please

[@angiewhalley1807]

OHHH MYYYYY GOSSSSSHHH.... thank you so much for your video's on how to use this Portable Mini Sewing Machine FHSM 505 - NEX Sewing Machine... you are awesome... I would have been dooooomed from day 1 without your help & advice on the video's... I'm new to a sewing machine... only tried one once at school & then once again about 5 years ago & couldn't get on with it.. but I am loving my new lil baby lol I am definitely hooked now (no pun intended lol) thank you again.... take care & stay safe xXx

[@common_era_being]

I was watching ur follow up video because of ur voice... it's like humming of a lovely bird.

[@Brandon-n5n]

Omgoodness. Thank you so much, this the first video that actually helped me. I was ready to break this thing, works great now, thank you so much

[@5592susher]

I just decided to purchase this machine from Amazon. It arrived today. I haven't used a sewing machine in over 40 years. Thank you for the detailed information. Looking for more of your videos.

[@Homemaker2020]

Can you please tell me , Is this machine works fine ? How its durability? Thank you

[@rosemarie9459]

Pano po gawin po yong nag bubuhol ang dinulid po sa ilalim po

[@cia13cia]

thank you so much for the video, however, i silly-ly dropped the needle holder screws when loosing the needle, and now the needle is stuck when i try to run it. you would not have macro picture of how the screws should be installed? i noticed there is this small screw inside the holder... thanks again in advance!

[@seemagupta7066]

My issue is the flat surface is not going up against the screw. The rounded edge is going towards the scre

[@cakeprincess7756]

Just found your channel. I got rid of a really good Janome sewing machine last year that i seldom used (long story) and just need a basic one for little projects, well i was going to get those handheld ones but reviews said they barely work. I wanted the elna mini which was on sale, bought some fabrics and supplies and literally forgot to buy the sewing machine not realizing days later. The elna is now full price and i didnt know if these minis would work or were more of a toy. You have saved me money and given me confidence to go ahead. New subscriber here and already love your thoughtful channel. You would make an amazing sewing teacher like the ones i had in school

[@maluisabaraquia]

❤❤ im a beginners and i thank you for your video it helps me easily understand this machine,its actually my girst sewing machine.

[@shiba_n]

How am I supposed to loseen the needle bar screw, mine is really hard to move or lose it, i cant lose it with habds is there another way to loseen it up? so I can take out the needle and replace it with a new one

[@connectionoflivesandinterests]

*I just bought a mini machine for $17.00 to learn on. It doesn't have different stitch choices like this one does. 💖💖💖 Great video. Thank you. 😁😁😁* Sharon in SC

[@EasySewing4Beginners]

Oh great! Is it similar to this mini sewing machine? kzbin.info/www/bejne/b2jZhZd5raeUh5I

[@connectionoflivesandinterests]

@@EasySewing4Beginners *Mine is just one stitch nothing extra. It doesn't even go backwards. I have the unboxing on my channel if you want to check it out. Happy Creating. 😁😁😁* Sharon in SC

[@EasySewing4Beginners]

Oh yes, found it! It’s very similar 🤗

[@zalkque6619]

Does this machine need oil change? I have this machine also but i notice that it works slowly lately.

[@wayneb.2677]

I have the FHSM-505. For some reason the thread gets a massive build up on the underside of the material. It takes some doing to get it loose from the machine. It probably would not be so bad if I turned off the machine quicker. I have tried two different spools three different needles and a variety of tension settings . What else might I try???

[@rheadee33]

That is what is happening to me I just started using the machine, and now the bobbin is not being picked up by the needle? I don’t know what to do ?

[@emsonletsbehonest]

Yep. Same

[@MiiMaker]

its the time issue. remove the pink panel under the presser foot and adjust with the hex screwdriver (located behind the machine

[@MiiMaker]

happed to me many time and fixed it many times

[@1hadhami]

Do you still have that same machine? Was the problem solved? and do you recommend it. I'm planning to buy my first machine and I don't know if this is a good option. I saw many comments about the needle being broken after few stitches.

[@ndinaelago3489]

Hey, how often do you lubricate your machine and how? Any tutorial?

[@yvonneoliver4054]

Hi, if you’ve found the answers, would you share the link? It seems like I have to buy $13 5mm tri head screwdriver to open the machine. Can I lubricate it without opening the left cover of the machine? Thanks!

[@savitadias6867]

I like the way u explain super good .....god bless u dear

[@marymccormack2317]

Great as I just got my machine? Great tutorial as u go through it slowly. T you. 👍☑️

[@vlogKeniel]

thank you for the help i needed to change my needles because they broke

[@gavryellaverron492]

Guys, if the thread gets a massive build up on the underside of the material, it could just be that the tension level is not compatible with the stitching mode. I fixed it just by switching the tension mode's level 😀

[@christineregines1198]

Can you elaborate on the tension mode? Where is this, what's the best setting or purpose of each mode? I'm a total beginner and I really appreciate if you can share some knowledge

[@Chicky_el]

Please I bought the same machine but it can’t sew zigzag

[@dipayaan_creation544]

Is this work pico..??and plz suggest pico pressure

[@virginiamcclain8373]

After threading machine it feels to tight and the thread always breaks

[@princess21538o]

I bought one and it easy to use with the manual . But you mde it easier thanks.

[@a.carter9987]

Any thoughts on why the sewing machine has power but will not run? Watched all videos and loaded everything correctly. The foot pedal is not powering the machine it seems. 😢

[@dianel2898]

Would like to know about some of the feet with my machine that don't have any kind of indication as to what they are for. Thank you for showing the trick with the buttonhole. I have other machines that I will probably u se for that function. I'm not all that crazy about the look of this one when finished. I was thinking of doing it again on the sides to make them look more solid. What do you think?.

[@Painter931]

Wonderful I found this next video that answered ally questions. I have subscribed so I won't miss any new info.

[@zuzanajusic9615]

I have the same machine and I don't know why he tore my thread. Immediately at the beginning of graying the tear changes the thread and I also can't sow anything. It's like someone's cutting it off in a needle. Help thanks from ❤️

[@EasySewing4Beginners]

Try checking the tension dial. Make sure it is on number 4. Also, have the stitch selection on number 1. When you are ready to sew, use the hand wheel to do 2 manual stitches first. This will stop the thread from coming out of the needle when you start sewing. Mine does this sometimes. Give these things a try and then let me know how it goes.

[@vuyolwethutyuka5764]

Me too my problem is cutting thread when I sewing,and I can't use revese,

[@purplelavender3618]

@@vuyolwethutyuka5764 what type of thread u use this machine work good with polyfile thread when i use mix or cotton thread is break of before i finish my sewing. no cheap dollarstore threads too as they break off fast.

[@purplelavender3618]

try only using polyfile thread other mix or cotton break after sewing finish i have that problem when use those threads ... no cheap or dollarstore threads too fyi

[@blessed6956]

Hi, what about fixing it's bobbin case back, the proper way, thanks...

[@Beeanieweeniee]

I unscrewed mine stupidly as it was all threaded up and now I can't get the bobbin case back in the right way so I can't get the plate back down 🥲 I think I've completely messed the machine up

[@CindyJohnson-j6p]

What kind of needle do I need for this

[@conqueringmountscrapmorewi2509]

Such a cute little machine! Thanks.

[@EasySewing4Beginners]

You’re welcome 😁

[@buddy77587]

I dunno. So far my learning curve is a straight line. There is the nuance to the machine. What I have learned is all sewing machines have a "touch" they are OCD. Right needle. Right thread. Right fabric. Right stich length. Right tension. Lawd!

[@buddy77587]

Not giving up.

[@buddy77587]

Since this is my starter machine. I can go onto a stronger 💪 machine

[@buddy77587]

Since this is my starter machine. I can go onto a stronger 💪 machine

[@olgacaraballo6806]

It works fine I made 4 place mats for my table , came out great started to make covers for throw pillows I misses 1 pin and the needle bent went to replace and disaster happen ..the needle holder fell off .can't put it back together ...help

[@Billybloop]

It's fiddly and you need to do it very carefully. This has happened to me. It's best to use a magnetic screwdriver.

[@Lemkecz1]

I just bought my daughter one of these and the screw that is on the post where you thread the needle, how do you get that screw through the metal clamp and what is the nut on the screw for? I'm worried they didn't thread the whole properly

[@gladystettehwayo3405]

Can I use my handheld mini sewing machine without the foot pedal?

[@andrewjohnson9451]

I have watched this video a couple of time, very informative. I do have one question about the bobbin. You video shows you putting it in with the thread to the left. The instructions show putting it in with the thread on the right. Which way is the proper way to install the bobbin. AJ

[@WheezerTheGeezer]

I noticed that as well. I tried it both ways... doesn't seem to make any difference.

[@Mk5Les]

I m having trouble on the end part were the threads tie

[@annavaldouglas4697]

How to tell what tension to use? Is it specific to the fabric your working with, or the stitch your using?

[@annavaldouglas4697]

Both of my needles that it came with just bent ;v;” I’m using a quilted blanket so it might be too thick- but it did make a few good stitches so I think it might be something else :

[@lisanangwe573]

Hey, my needles keep bending on this machine. What could ve the issue?

[@rockypoonisingh6183]

Hi thanks so much for the tutorial 😊 The problem is my thread is coming out of the needle everytime I am starting the machine .....please someone help me

[@RoeRoe123]

I don't know much but it sounds like the upper thread tension. It is adjusted by the vertical pink wheel towards the middle front. Should be a simple fix, just turn it and try on a scrap until it feeds correctly.

[@emmanicholas1463]

Hey, thanks for the video, could you please show how to hem the end of a fabric with this machine?

[@Jomara469]

I have an exact machine however, its motor is not working, how do I fix it. It runs for a moment then it stops. Please help. Thank you

[@Nichie_YT]

Mine doesn't want to take the bobbin, can you do a tutorial

[@jessikerz25]

What kind of snap on presser foot ARM do I need to buy? Every one I look at on Amazon says "NOT FOR MINI SEWING MACHINES" . I Need the actual presser food holder arm. I have the feet themselves but I lost my arm or holder whatever it's called.

[@olgacaraballo6806]

I went to change the needle in doing so the piece fell off now im having a hard time trying to put it back on ...please show me how to put back on

[@sammar6810]

Plz more videos about this machine

[@jennlefrancois4037]

Just bought this machine but has no numbers for measuring on the needle plate, just lines. What are the measurements so I can write on it or can I replace it with one that has the measurements

[@syeda4048]

Can you please show me how to take the bobin out first time to fill it up .I'm unable to take it out also The screw to change the needle is not moving to take the needle out 😔

[@barbaralaue8727]

It’s ok to use a pair of pliers to loosen the screw. Good luck!

[@barbaralaue8727]

See this video to learn how to fill the bobbin. kzbin.info/www/bejne/pmjKgqmLZs2Gr9E

[@nailsbyleigh5707]

Hello , I have this machine & it seems to not be catching underneath and keeps getting jammed . Any advice ?

[@cake2873]

Hello I have a question on how to do embroidery on this specific sewing machine? Or if its even possible………

[@melokakaza7178]

You such a sweat heart. Thanks for making these videos it is much appreciated

[@carlajunge5682]

Any idea why as soon as I turn it on is automatically sewing, without pushing on the pedal? No the pedal is not stuck down.

[@Billybloop]

That's just a feature of the machine. If you want to use the presser foot to sew the switch needs to be in the off position.

[@christal23]

I have a question, I can't find out how to use color threads and I can't find small top bobbins anyhow even in black and white, so how to change the color of the thread?

[@Billybloop]

Does anyone else have frequent problems with the needle bar position/timing? I have had to adjust the needle bar more times than I can count now. It happens so frequently that I haven't bothered to put the screw back into the face because I need constant access to the needle bar adjustment screw. This isn't even my main machine so I have only used it about 10 times in the last year. I have had to adjust the needle bar almost every time I have pulled it out.

[@kiruthigathangaraj3535]

Do you know how to fix the bobbin that’s not working. Needle stuck and it is not moving

[@paulawittstock1103]

My lil sew and sew machine won't pick up the bobbin thread help how do I fix it?

[@ananthiramoo649]

Why every time i m using number 7 sewing 3to4 step the thread from bobbin come up and the needle will stuck

[@leneter2808]

How do you clean the bobbin housing?????

[@enchantress215]

Hi, I just started sewing with this machine, beginner here. I am not able to stitch my satin fabric. Other fabrics it does fine but with satin the thread doesn’t come out of needle, it just doesn’t stitch!

[@estherduah4446]

Thanks for the guidelines. My needle thread can't pick the bobbin thread go do I do it?

[@sedna770]

The timing of the needle and the hook of your sewing machine is out of alignment. You can find the repair method on KZbin.

[@muskanrana4243]

Hi there…i had to change the sewing needle but it keep falling down even though i have tightened the skru I need help

[@Rhea7383]

How to fix this sewing machine if not running the bottom part, the metal thing under foot presser

[@MiiMaker]

what foot pedal supports this machine? The foot that came with this machine really sucks. I need a foot pedal that doesn't break and has pressure sensitivity (for sewing curves)

[@charitogaspi8326]

Can you please specify what types of presser feet this machine can accommodate since there are various type available. just want to buy what is comptible with this 505A type sewing machine. thanks

[@user-di7tn3ki2v]

Extremely helpful. Thank you 🤍

[@marylinvillaflor9380]

Gd pm maam ! I have a problem now regarding my newly ordered minisewing machine ,it wont run out, the upper part was clogged it wont push down the needle what will i do ?

[@katywinzer3854]

Hi thanks for a great video but can you tell me what zipper foot I can use for a donyer power which looks like yours thank you

[@mursau]

merci pour tous ces renseignements

[@tammyardoin-Bithiah]

I have a question please. I have this machine but my bobbin threading keeping balling up on the back of my material. It will sew 2 or 3 stitches and then stop because of the balling up of string on the back of the material. I thought maybe it was the tension on the bobbin thread but I do not see a way to adjust the bobbin tension. Have you had this issue with your machine? Thank you for your videos. They have helped me and I appreciate you!

[@WheezerTheGeezer]

I had this problem as well. This is called a "birds nest". I did a KZbin search and learned how to avoid this from happening. Basically you must be sure that your presser foot is in the UP position when threading the machine. If it's down the tension discs will close and the thread is unable to pass between them. Simple as that! Give it a try.

[@preetibahravi2725]

Hi! I am having the same issue as well 😢

[@tammyardoin-Bithiah]

@@preetibahravi2725 I changed the type of thread I was using and the problem went away. Cheap thread was my issue 😕

[@lisem8049]

What do you do when the fabric gets stuck?

[@Beeanieweeniee]

Hi, I unscrewed the plate to get to my bobbin case as my thread was sooo jammed but now I can't get the case back in the correct way and there's no diagrams anywhere to see if I'm putting it back correctly. Now I can't get the plate back on 😭😭😱. I think the black bobbin case is wrong anyway as the top thread keeps getting caught in the bobbin case

[@ezekielalamu4404]

I need help my sewing machine bar loosened and the needle bar tightener came down and I can fix it help

[@nielemsoomah4335]

Hallo can i have a video ,when the needle does not pull the rope from the bobbin ,wat can be the problem

[@marjoriebanzal5919]

Can I ask question? why is that my needle keeps on breaking everytime I do the reverse? Thank you and God bless

[@MontageLegacy]

how and why? does it hit against something solid? if so then you might need to unscrew the bottom part of the machine. where the bobin cover lays. theres like on the purple thing two screws. take those off and u should find two black things. check if ur needle hits against that.

[@Diamond_789]

I’m having this same issue

[@beatrizsaavedra4409]

I just bought one and the tread kips braking after 2nd stitch , what is wrong ?

[@cyndeestipanovich8956]

I am missing the bobbin cover for this machine is there any way to replace it?

[@leteciaponteres4440]

How to adjust the needle to exacty shoot the hole of the presser foot, the needle was cut

[@wzwz1663]

I bought this machine 2 weeks ago and am trying to make a tote bag. I was trying to make handles and could not sew 4 folds. How do I sew very thick part? Presser foot is absolutely flat since there is no bumps. Thick all the way. Or is this machine not capable of sewing very thick fabrick? Please help!

[@justhavefunchannel66]

Hi i have the same sewing machine but mine is running backwards now and stuck on reverse what should i do?

[@amico4813]

Hi can i change the machine needle to size 110 which is meant for sewing thick fabrics like canvas and leather etc?

[@creativekat109]

i sew other video saying yes can changes the needle size base on what type fabric we need to sew.

[@netnet461]

Hello I have the same machine and thread keeps getting tore. And also can you sew faux leather on this machine.

[@dogit1840]

Not really making a buttonhole was really cool but to show the machine true capability you need to make a repair on something shirt pair of pants or even make a bean bag

[@wajerainestephanie6728]

but what needles do I have to use when it comes to denims , because it's keep breaking

[@Bstart1234]

..hi does the reverse button work for all the stiches...

[@Srirangasrivaari]

hi, how to adjust zigzag stitch for 7mm in this machine, pls do suggest

[@missesteja2022]

Please mention the link of these machine all foots.

[@minnie87679]

I just wanted to say absolutely awesome video and very informative i've had this sewing machine for about 4 weeks and i am loving it, i just wanted to ask though, is there a way to put the feed dogs down because i have the multifunction 52piece presser foot set and they all fit on my machine but there are a couple that you have to lower the feed dogs to use certain presser feet, if you could help me with this question i would be extremely grateful

[@krisanninocellos1714]

Paano po ba palitan yong sewing machine Ng needle Kasi diko po mahigpitan Ang needle diko po mapalitan

[@DealAdmin01]

May I know how to raise the height of the Presser Foot? The default height of my sewing machine is too low to squeeze in thick fabrics like denim etc.

[@sujithajayakumar8609]

Hi my cloth is stuck how to get it out ?

[@alexdalbianco203]

Good day. How do I know from the strength of the material so as to set 1 to 5. Thank you.

[@bille-sports]

hi. i just want to ask. how to change speed if you are using the pedal?

[@tcfmarch17]

It's a great little machine for crafts including paperwork like journals.

[@preetibahravi2725]

Hi! my thread keep snapping! Any help would be appreciated 🥹

[@robinmoffitt1363]

Why do my thread keep breaking off of my needle when I start sewing

[@tehminapathan350]

please someone tell me, should i buy this or not

[@belindascrazylife3534]

My current experience I’ll say no don’t

[@staceyandrews5267]

Nope. I am having a lot of the same problems as these comments with it breaking threads

[@tehminapathan350]

@@staceyandrews5267 @Belindas Crazy Life thank you for replying can you guys suggest me some good sewing machine

[@victorhood3453]

I bought it for hemming up pants and so far so good . I got like 8 pairs nice pants at Kohls for unreal cheap price 70 dollar pants for 7 dollars 85 for 8.50 and so on . Only problem is they are 1 ,2 or 3 inches to long .. this thing paid for itself with the first pair .

[@staceyandrews5267]

@@tehminapathan350 I'm not really sure, but I just upgraded to a Bernette Academy, haven't had a good play around on it yet but already so much better. Worth paying a bit more

[@hasbiyamohamed]

How long will it take to installed the batteries

[@lourdeslabandia2124]

Hi, i just ask na try ko na ang ganyang makina bago kong bili i try it at nag function naman kaya lang within that minutes after i try yong needle nya with the thread i put and give a long extra thread para hindi matanggal when i start to sew matatanggal ang thread sa needle at hindi na magsew can you help me. thanks.

[@ash_gacha6212]

Uhm,I tried to do that last night and I only took the spinny part off and not the needle.im gonna try it again tho :)

[@imamshodiqin83]

Berbagi tutorialnya sangat menarik sekali semoga semakin sukses

[@eclecticengland8302]

Thank you! Can the feed dogs be lowered and/or is there a way to free-motion quilt?

[@HJKelley47]

Free motion quilting for what quilting project, since the throat space is sooo tiny?

[@itz_actiontime5783]

how do I disingage needle when winding bbble

[@CocoLeeney]

I have this machine and my bottom thread keeps getting tangled and causing my machine to jam. I don’t know why.. makes me wanna cry..

[@EasySewing4Beginners]

It can be tricky to work out the cause without looking at how the machine has been threaded up and sewing with it myself. You can check that the machine has been threaded up correctly. See this video kzbin.info/www/bejne/pmjKgqmLZs2Gr9E and ensure the presser foot is up when you are threading the top part of the machine. This will ensure the tension disks are open when you are threading the machine. Also, what type of thread are you using? I recommend using Gutterman all purpose thread. Also, check the tension is set on ‘4’ and test the machine using a straight stitch with cotton fabric. You can even try changing the needle and winding new thread onto your bobbin. Let me know how you go 😁

[@CocoLeeney]

@@EasySewing4Beginners I have changed the needle, rethreaded the machine and still no use. I tried using the gutterman thread as well. And the tension dial is set at 4. It’s either bunching up at the bottom and not holding the stitch. I don’t know what’s wrong. Not sure if it’s a me problem or a machine problem. 😭

[@johannagreyling588]

The tension is on 4 I've changed needle because sew with Lycra the tension still not good. Any advice?@@CocoLeeney

[@Godfirst-ry5kh]

@@CocoLeeneymy stitch isn’t staying in either! did you ever figure out what the problem was??

[@Hoodedcoon]

I can't put my needle back in it broke and I needed to take it out and thus helped for that but I can't put it back