【エボスポ乗り必見！】XL1200S ガッチャン現象の原因とその対策！XLH883 XLH1200 エボリューションスポーツ

当店のホームページ
Our website
www.infinity-a...
アパレルやオリジナルステッカー等の販売はこちら
Click here for apparel, original stickers, etc.
www.infinityay...
当店のインスタグラム
Our Instagram
www.instagram....
今回もご視聴誠にありがとうございます。
今回はエボリューションスポーツに多い不具合、その名も『ガッチャン現象』の原因と修理を動画にアップしました。
特に2000年～2003年のスポーツスターに多く出やすい不具合です。
原因としては、ギアそのものの形状、シフトチェンジシステムの構造の問題、操作方法などなど、いろいろな原因が絡んでおり、ギアを変えただけでは完治は難しいです。
ギアが非常に高く、工賃まで含めると、18万円ほどになります。
状態によっては交換しなくて済む場合もあるので、一概には言えませんが、それでも高額な修理になりますので、覚悟は必要です…
どのような修理方法なのか、当店での方法になりますので、お店によって修理方法と対策は異なると思います。参考になれば幸いです。
Thank you for watching this video again.
This time, I uploaded a video on the cause and repair of a common problem with the Evolution Sport, the "gachan phenomenon".
This phenomenon is a common problem with Evolution Sportsters, especially the models from 2000 to 2003.
It can be caused by a combination of factors, including the shape of the gear itself, problems with the structure of the gearshift, and problems with the way it is operated, making it difficult to completely fix the problem by simply replacing the gear.
Gears are very expensive, costing about 180,000 yen including labor.
Depending on the condition of the gears, it may not be necessary to replace them, so it is difficult to say for sure, but it is still an expensive repair, so you need to be prepared....
This is the repair method used in our store. The repair method and measures may vary depending on the store. We hope this is helpful to you.
#ハーレー #ガッチャン現象 #スポーツスター

[@kakugari_gogo]

動画の雰囲気、登場するマシンのスタイル。どれを取っても好みな物ばかりでその上勉強にもなる最高のチャンネルです。ありがとうございます。

[@infinitymotorcycle]

ありがとうございます！

[@user-cd5go8xo1p]

エボスポ好きなんで、 なんて丁寧で細やかな心配りでメンテナンス、修理されてるんだろう〜 プロの仕事に、 映像音楽のおしゃれさに、 ほんと心地よい気分で見てしまいます ありがとうございます😊 同じく何回も見てしまう💦

[@infinitymotorcycle]

コメントありがとうございます！これからも最上級の癒し動画をお届け致します笑

[@ieongluis3717]

お会いできてとてもうれしいです！ あなたのハードワークと無私の共有に感謝します！

[@infinitymotorcycle]

コメントありがとうございます！

[@toru_sing]

ハーレー初心者ですが勉強になります✨✨ガッチャン現象は自分にもなる可能性あるので非常に為になりました🙇‍♂️どの動画も見ていて本当に楽しく、何度も見てしまいます!!次回も期待しております😊🙏

[@infinitymotorcycle]

コメントありがとうございます！町中のストップゴーが多い地域だと出やすいようです。ギアチェンジする際はしっかり確実にしてあげてください。次回もお願いいたします！

[@toru_sing]

@@infinitymotorcycle これからギアチェンジに気をつけて乗ります！ありがとうございます🙇‍♂️次回も楽しみしております🙏

[@87shd30]

以前Infinityさんにて、同様に2002年式883のガッチャン現象修理して頂き、3年程乗ってますがそれ以降何事もなくギアシフト出来ております。その節はありがとうございました。おかげさまで恐怖なく乗れてます。自分ではなかなかできる修理ではないですが、わかりやすく見入ってしまいますね。今後の似たような作業の参考になります！！

[@infinitymotorcycle]

コメントありがとうございます！不具合出ていないようで安心しました！おそらくずっと出ないと思いますよ！

[@hiroakiaoyama6651]

いつ見ても仕事が綺麗で手際が良いですね

[@infinitymotorcycle]

編集のおかげかもしれません笑

[@pauloars]

Congratulations for the great job. I have an XL1200 and I am passionate about Harley Davidson mechanics. I wish the friend much success and I am happy to know that on the other side of the world there are people who love HD as much as I do. Greetings from Brazil.

[@infinitymotorcycle]

I'm so glad you commented from the other side of the globe! Japan is a big Harley country! It's overflowing with everything from old bikes to the latest and greatest!

[@hardy-xn1kq]

I wanna say thank you so much many times. I have replaced pair of first gear, drilled another hole in arm lever and wow, how easy to find neutral, no more jerks, smooth ride. I like it a lot. Best wishes from Russia.

[@infinitymotorcycle]

It'll change the touch of the gearshift and make it easier to ride!

[@giusepperocchi8161]

Hi, I am a former Harley-Davidson mechanic, I must say that you work very well, beautiful the hole on the lever, excellent makeup. Greetings from Milan, Italy

[@infinitymotorcycle]

I am really happy to receive compliments from the mechanics! Thank you!

[@user-xs5us6nz3s]

いつも楽しく拝見しています。 丁寧で手際の良いお仕事ぶり、すごく好感が持てます。 もし、ハーレーを購入するのであれば、Infinityさんにと考えています。

[@infinitymotorcycle]

ぜひご連絡お待ちしてますよ！

[@RCTUN748]

14:01 Wow, I never would have thought of that, you're really kind, I learned something new. I always take care of my engine by myself, but if I lived in Japan, I would definitely bring my Harley to you for maintenance! Watch your posts is always a pleasure!

[@infinitymotorcycle]

We are glad to be of service. Please look forward to our next video.

[@antipodas1979]

So good, smooth and relaxing!😁 Thanks for uploading this video! Greetings from Portugal!

[@infinitymotorcycle]

Thanks for watching the video from Portugal! I'm glad to hear that. Please look forward to the next video.

[@douglas9607]

Nice work. Thank you for the video.

[@deadheadlights]

Thanks for another good video! I have a 1990 XL. The 3rd gear broke and blew out the back of the engine case. My shop is a Knucklehead to Shovelhead specialist so I cut the gearbox off the back of the Sportster engine and replaced with a Shovelhead gearbox.... I had to modify the frame etc. Now i have a Shov-ster haha Takecare my friend

[@infinitymotorcycle]

Thanks for the comment! You do amazing things! I've never seen that much customization in Japan!

[@1MrDRY1]

Wow! Amazing video! Thank you a lot!

[@infinitymotorcycle]

Thank you so much for your very nice comment, it means a lot! Please come back to watch my next video!

[@anonymity6876]

Another great blog. You have the best job in the world. 👍🤘😎🇦🇺

[@infinitymotorcycle]

Thanks for the great comments！

[@user-vx9mn5po2c]

いいわ〜〜〜 ハーレー買うならここで買いたいな

[@infinitymotorcycle]

おまちしております！！

[@tomoyama328]

はじめましてこんにちは。 キャンツー動画の雰囲気好きでチャンネル登録しました。 2001BIG TWIN〜1979shovel〜2020ZX10Rseと私自身ハーレーから離れてしまいまさたが、動画観てるとスポーツ乗りたくなりました。 いつか来るかもしれないその時はぜひお願いしたいですね。

[@tomoyama328]

日本語おかしくなってますねwww

[@infinitymotorcycle]

コメントありがとうございます！ぜひぜひ！ 動画を機会に戻ってきてくれたらとても嬉しいです！

[@ericweber1969]

Outstanding video as always!

[@infinitymotorcycle]

Thank you!

[@nazar.ostryzhniuk]

Very nice video! Hello from Ukraine It looks like both front and rear suspensions have modifications, looks very nice! I love this style! Could you please tell me what exactly is changed with the front fork, I'd like to make something similar with Sportster?

[@infinitymotorcycle]

Thanks for commenting from Ukraine! I didn't change anything in the suspension of this Sportster! It's stock. XL1200S is originally equipped with a cartridge type suspension.

[@nazar.ostryzhniuk]

​@@infinitymotorcycle wow, that's awesome! How does it feel on the road in comparison with Harley's regular fork?

[@infinitymotorcycle]

@@nazar.ostryzhniuk Because of its generous stroke, the vehicle barely feels the unevenness of the road surface during normal driving, and the amount of spring sinking can be easily adjusted. When driving at high speed, you can drive with peace of mind as the moderate stiffness prevents wobbling. However, many of them need to be overhauled due to aging.

[@ericweber1969]

@@nazar.ostryzhniuk please stay safe in these challenging times, and I hope your country prevails in its struggle for freedom. Best wishes from the USA! 🇺🇦 🇺🇸

[@nazar.ostryzhniuk]

@@ericweber1969 thank you for your support!!!

[@woongtv-naturehealing273]

Hello, my new friend. Wow! It's such a useful and healing 💗💯💞 motorcycle repair video. Especially, your technology is amazing. I'm going to watch your full video. It's an honor to be your great channel friend. 💘💖💙 Have a lucky day 💛💜💚 👍👍👍🤙👌

[@infinitymotorcycle]

Thanks for the nice comment! I'll be uploading a lot more healing motorcycle repair videos in the future, so look forward to that! thank you!

[@kennyh5083]

nice scooter dude!

[@kristinacallahan266]

Hello and thank you for the video. I have a question, what are the size and dimensions of the e clip you used as a replacement? It seems like the stock clip that hold the Detent plate is a point of failure, what did you use as a replacement? Thanks from arizona

[@infinitymotorcycle]

I forget the size of this clip, but I prepared the clip first and machined the shaft to fit it. But now I don't use this method, I mount it by welding.

[@takezou5409]

普段なかなか見れない中身が見れて嬉しい😃自分がやったら絶対パーツが余りそう😅

[@infinitymotorcycle]

ありがとうございます！takezouさんの年式は子の不具合は出ないので安心してください笑

[@richardgrognard6394]

good morning to all !!!

[@user-yg3gd7qd4b]

m8のハーレーの作業風景も拝見したいです

[@hardy-xn1kq]

Hello from Russia! Thanks for sharing! My Buell X1 need same service for gearbox. I have jerk in first gear when starting motion, but it happens seldom. Subscribed.

[@infinitymotorcycle]

Thank you for your comment from Russia! If the problem is not that bad, I think you should take care of the detent plate alone, so you won't have problems for a long time to come!

[@hardy-xn1kq]

@@infinitymotorcycle Oh, thanks. I'll check it.

[@hardy-xn1kq]

@@infinitymotorcycle Good day! I extracted gear box from the engine and didn't see any marks of wear on gears. The detent plate placed an angle to surface and has scuffs on 5th gear point, may it causes jerks? Thank you.

[@TIG3344]

音が良い、、こだわりの編集ですね。

[@infinitymotorcycle]

ありがとうございます😊

[@uvillegas]

Como cuando no sabes si ves el video porque esta arreglando la sportster o por la musica tan relajante

[@user-rr5mu4vg6c]

自分のスポスタもみてもらいたいです！

[@infinitymotorcycle]

是非ご相談ください！

[@leedoohee1]

nice job tkank you .

[@infinitymotorcycle]

thank you!!

[@user-wt9ou7xc9c]

Thanks for video! Whats torque of the gearbox plate and shifter sfaft?

[@infinitymotorcycle]

Thanks for the comment! The bolt on the gearbox plate is about 20Nm and the nut on the shifter shaft is about 11Nm!

[@rmeyer4322]

クピクピプペポ ガッちゃんも