ECG AND BP For Galaxy Watch 5 And Watch 5 PRO Install Without PC | EASY METHOD!!!

[@TechnoProz]

For Galaxy Watch 6 and Watch 6 Classic try out this method. kzbin.info/www/bejne/mGPUaoyie6x8jKc

[@hainatu7442]

Thank you so much for the detailed instruction. I am a 73 years-old female and have only a basic knowledge of computer. By following your instructions and it worked! 😊

[@EdCrane-ft3xk]

Thank you so much, you saved me from sending back the watch, the main reason I bought it was for the blood pressure/ecg app and pretty mad at samsung for advertising that it was included without being clear that they would not support it in the US. Dante and you did an amazing service for so many of us. I read his instructions but will admit that it intimidated me until I watched your video several times. Don't think I could have managed it without the Bugjaeger site either. So, I want to thank all of you. The app does work on my watch 5 pro now and I am grateful. While I do have a medically approved cuff blood pressure reader and am able to use it to calibrate my watch, it's just not convenient to take it with me everywhere. When I have chest pains and the ecg app indicates a problem, I like to check my blood pressure before deciding if I should bother the people in the emergency room.

[@kaiezhou6458]

I followed your instructions, and it was done, without any problems. my watch is Galaxy Watch 5 Pro, the phone is S22 ultra. just one little advice, please compose a manual with pics based on this video, that makes followers much easier to understand rather than repeatedly rewind your video

[@raineross188]

Oh, my gosh, after two hours of struggling with this, I finally got it after reading many of your comments. THANK YOU! I am 65 but "fairly" techy, but I've never gone into a device this deeply. I think the biggest issue was opening the correct Samsung Health Monitor. The icons are slightly different. Once I saw the difference, I uninstalled the old one, restarted my phone, and then reinstalled it during the process in the video. Do not install it directly from the Play Store. Good luck, and don't give up!

[@0105adina]

Thank you so much for mentioning the slight difference in the icons, it really solved my problem. The app on my oneplus android wouldn't open and I noticed the difference between he icons, but didn't know there was more than one app to install on the phone.

[@davidweaver-xp5ig]

I spent a lot of time before discovering that the blood pressure app is not available in the USA. I was able to use my Galaxy Watch 5 PRO to check my blood pressure using this EXCELLENT video!

[@n2s2k21]

A while ago I was diagnosed with atrial fibrillation and hospitalized. Bought this galaxy watch 4 to monitor it but I was disappointed when I realised that function is not available in my country. Thanks to you, now it's enabled and I can be peaceful.

[@aura1311]

I am SO BAD with tech stuff but I got it too work!!! I had a little trouble because they updated it to "wireless debugging" so I panicked haha but if you hit this problem don't worry! The IP address is still present! Everything you need IS THERE....just follow the steps in the video and type in the code your watch will give you!! If I can figure it out so can anyone else haha this vidoe helped a lot thx!

[@petebuka]

Working like a champ on US Watch 5 Pro version. I now have separate modified Samsung health apps on watch and on phone...Original apps are untouched...This is perfect, Thank you so much.

[@kzigmant]

I was able to successfully install and use BP on both a Galaxy Watch 5 Pro and Watch 4. Both are working great, thanks to this video.

[@oluwatosiniyiola7583]

I have tried this twice already. It did not work on my watch 5 pro

[@oluwatosiniyiola7583]

Not giving up pays. I tried again tonight and shockingly, this works fine on my watch 5 pro. Not sure what I was doing wrong initially. Thanks for sharing this video.

[@Drvoldemortakavader]

Just tried it and it really works, it was very well explained and app was installed without any issues, thanks a million,

[@Speedster052]

I have a problem. In the Bigjeager program, it doesn't establish conection with my watch, pop up a message "No address assosiated with host name". The IP is the same that shows up in the debug wifi section.

[@luszlips]

Thanks for posting this fix. One thing that got me hung up is that you have to load two pieces of software one on your watch 5 and the updated Samsung Health app on your phone. It was shown in the video but did not catch it in the verbal description.

[@iamraremon]

Really appreciate this! Almost loosing hope because BPM and ECG are not available on my location as well.. Thanks for this!

[@gibbydad]

Thank you so much. Bought the Watch 5 for the BP monitoring specifically and couldn't find it until I followed your tutorial.

[@Kaustav41]

Thanks a lot dude!!! You made my day! I have purchased galaxy watch 5 but having pixel mobile!! I followed the steps you told and it is working like charm!! Thanks a lot. I am subscribing also for future this kind of videos 🙏

[@Mario_N64]

So, it does work on non Samsung phones?

[@josephdiatta4446]

Works like magic😂😂😂 It was a bit tough for me having to input my IP manually on the Jag-bla bla app, but it I got it. 😂😂Thanks

[@pokuspilatus]

Thank you for this video! You made me very happy. Somehow downloading the files to my Pixel 7 did not work, but from my laptop to drive did, and the rest was a piece of cake due to your clear video (although I was a bit nervous as I have never done things like this before, and my BP did go up a bit I noted :). Now my SW4 is also measuring the BP and ECG. Thanks to you and of course Dante63!!!

[@TechnoProz]

Are you using BP feature on your Galaxy watch paired with Pixel 7?

[@pokuspilatus]

@@TechnoProz Yes, I do, and it works fine! Tnx for your help!

[@montvm]

@@TechnoProz Does this information get ported to google fit?

[@petabb]

Wow it works for a non-Samsung phone on GW5 44mm. Awesome thanks.

[@petabb]

Since then, I bought 2 more GW4 and followed the same procedure. Now we have 3 GW that can do BP/ECG.

[@Nick71Boyd]

Brilliant. Thank you 😊 Needed to switch Wifi from 5G to 2.4G for phone to watch connection , then worked perfectly. C'mon Samsung make this work across all Android devices.Thanks again .

[@JeepJKJunkie]

Super helpful and detailed enough to install myself. We'll done. You have a new follower. Cheers for the information and detailed step by step guide!

[@mauriciomanrique890]

I had the same problem with an UK version watch, after following the initial steps, the Bugjeager couldn't find the watch, so I tried this: same settings as in the video but also Wireless debugging, there in the watch you could see Pair Device, a number XX.X.XX.XX:XXXXX, and a pairing code of 6 numbers, so after many times trying, in the Bugjeager, as ip address I typed just the first numbers before the two dots, thats XX.X.XX.XX and the 5 numbers after the two dots is the port so type them below, and below that is the pairing code from the watch, and then instead of connect, hit PAIR, and thats it, then continue as per the video. Worked for me ;-)

[@adrianwalden9788]

can confirm this worked thank you sm I was so lost lol :)

[@Mario_N64]

Thank you so much. I was going crazy trying to it install it. This did the trick.

[@rafaelaraujo6113]

But where is the pairing code from the watch?

[@Mario_N64]

@@rafaelaraujo6113 You get it on the watch settings, there's a comment here that describes the whole process.

[@vegadealer]

I tried this it still doesnt connect, do you have any other suggestions?

[@DirtyTesla]

Amazing video thank you so much. I especially appreciate the tip to turn off the developer settings to save battery when done. A+

[@Dkb4lls]

Thank you so much, I can't express how greatfull I am the you explained it so well. Very helpful for someone who is computer illiterate like myself. It worked perfectly for me first try......

[@shadowmcnehneh608]

Bro, you're the best Screw the FDA for stalling approval on a freaking BP and ECG feature. But they have trouble approving other things! Maybe Samsung should ask for an emergency authorization And it'll be approved straightaway.

[@martinfujt1597]

this is not a dangerous procedure for the watch? can't the system crash? is the factory warranty still valid? Thanky you!

[@Linili89]

Best introduction I found. It worked easily and right away with Samsung watch5. Thank you

[@belindawise6306]

Thankyou - it worked! Samsung galaxy 5 watch allowed ECG and blood pressure on an Oppo A52 phone

[@pocapaypay]

Lifesaver! Thank you. I bought the doggone watch to have a quick bp checker and other uses obviously and doggone it if samsung didn't remove the freaking ability! Thank you!

[@theblindsharpshooter]

.......remove it from what???? I was thinking the same thing. I had the Gear S3 and the GW3 and I thought both would measure my BP. Posted over in the Samsung Members forum and some Ambassador said none of the Galaxy watches have had the ability to measure BP

[@turboeclipse2wd]

Thanks for the video! I was about to return my watch since I'm using with a Pixel 6 Pro and felt I wasn't getting the most out of the watch without those features. Wife has Galaxy S22 Ultra paired with her GW5 and had those features so I knew it was due to being a non Samsung phone. Now I can get the most out of the watch so I will keep it!

[@akosichosen1]

Hey i have a pixel 6 pro as well. i followed the vid tutorial as well but can't seem to work for me.

[@turboeclipse2wd]

@@akosichosen1 I think I tried it two times because I failed on the first shot, can't recall of anything special I may have done to get it to work other than following the tutorial. Sorry, wish I could have been of more help.

[@akosichosen1]

@@turboeclipse2wd the GW5 came with a pre installed SHM, is it the same with yours? I was thinking it is what's causing for it not to work. urgh...

[@turboeclipse2wd]

@@akosichosen1 yes, that where your issue is at if you are trying to use the pre installed version. You have to download the modified version that the tutorial describes in order for it to work.

[@bilyac]

You're great, thanks to you I can use watch 5 blood pressure and ECG. Thank you. Harikasın, sayende watch 5 tansiyon ve ekg kullanabiliyorum. teşekkür ederim.

[@silasajimijaye1855]

It is working very well . Thank you. Hi people, heed the warnings and still check with your doctors as required

[@hanumantharaokatari6188]

Thank you so much for the explanation. I have followed your suggestions and installed SHM in my watch. I'm able to calculate BP and ECG.

[@hblanche]

Thumbs Up! Process worked perfectly on a Watch 5 and Samsung Galaxy Note 20 Ultra.

[@laurencesharp6751]

This worked great for my Galaxy Watch 5 Pro and a Oneplus 7 Pro phone. Many thanks.

[@rebelduke1]

I'm looking for advice please. I have a Samsung Watch 5 Pro and a Galaxy S23 Ultra. BP was working fine since the watch 5 Pro was released. Several days ago, my watch performed a firmware update and now BP does not work. I've confirmed I am in Developer Options, Bluetooth off, ADB ON. The ADB debugging over Wi-Fi option is not available on the watch screen so I can not use the Bugjaeger app. to copy the Watch SHM to the watch. Any ideas as to how I can proceed? Thank you.

[@jessicamarti8732]

Got it to work in less than 5 minutes! Should we delete the watch APK file on the phone? Or keep it in case of updates? I've never side loaded before so unsure what to keep

[@OlyGoalie67]

I hated that my Surface Duo 2 wouldn't let me use my watch 5 Pro to is full potential... Thank you so much!!!!

[@nycbillhill]

Minor update to this procedure: In Wear OS 4.0, the section in the video that states WiFi debugging, will now say Wireless debugging on the Galaxy Watch 5/5 Pro. I used the procedure for Galaxy Watch 6 and 6 Classic from TechnoProz and it works. The SHM MOD Companion connected to watch easier than Bugjaegger. Link to Galaxy 6 Procedure: kzbin.info/www/bejne/mGPUaoyie6x8jKc

[@theblackflag2020]

Man. I honestly can not thank you enough for this video.

[@Iceberg_maal]

Straight to the point! This was great. Thank you

[@markm75]

Thanks for the viceo, worked fine.. but, after installing, on both phone and on the watch we now have two samsung health apps, is that correct? Only the 2nd one works to do the bp right? Should the original be used for everything previous?

[@scottcohen3192]

When I try to download the program on my watch, I get an error that says "App not installed, as package appears to be invalid". Please help

[@judyball5743]

Has anyone had success with a pixel? I get both phone app saying no watch found and the app on the watch saying Not for watch. I am also unable to delete the other health monitor app off my watch. Any help would be great. Thank you

[@aggyv798]

It worked on my watch 5 and huawei p30 pro. Many thanks

[@milosjovanovic653]

It works on my samsung, i cant believe. Good job my friend :)

[@renegonzalez1614]

Nice! I got my to work on a non Samsung phone . And features are turned on .

[@qwikyss]

I'm from India. I have tried the exact steps. But I'm getting error in the phone app. "No compatible watch found". I'm using watch 5 pro. Please help. I was able to use it finally. The problem was with installing the app. Thank you so much.

[@olukoluadesola5921]

Thank you for this information- packed video. Please, do I need to use another external wifi or I can use my phone as the wifi source for the watch?

[@jgrnog2955]

Thanks for this tutorial. I tried it on my Poco F3 and it works great.

[@andreeaamarghioalei1256]

Amazing! Thank you, I was about to give up on those features since I don't have a Samsung watch.

[@ahmadrahim5085]

Thank you sir , worked liked a charm . I was about to sent the watch back but you saved my watch

[@WalayTVinTown]

Thank you.. 💪 works great for me here in 🇵🇭 Philippines.. 😀

[@johngabrielgenuino2357]

Legit bro? :0 natatakot ako mag iba ng settings hahaha

[@elsenorgato]

Yessir is working perfect! Thank you!

[@ernieschatz3783]

"Allow debugging" did not show on my watch until after 2 attempts to connect. After that it went smooth. Thanks!

[@bavush2477]

I used ADB debugging through laptop. Thank you. It is working well.

[@michealsizemore1]

How did you connect the watch to the laptop.

[@seesara]

Help! When I try to install the file for my watch a prompt comes up asking me if I want to update the Samsung Health Monitor app. My options are to Update or Cancel. If I select Update it will fail and a message pops up. It reads, "app is not installed as package appears to be invalid." Where did I go wrong? I'm so close to having the entire process finished! For reference I have a Google Pixel 6 Pro and a Galaxy Watch 5.

[@kimvine4220]

Having trouble, the step to accept debugging isn't showing up on my watch- do i uninstall the SHM app from the watch? how do i uninstall the watch app.

[@lake195]

Worked out on my watch pro, but you have to first download the watch shm then the phone apk, and it worked

[@Fastdrawl]

how did u delete the apk file from your phone if you did that first...? i can not get it to load on my watch. i did the phone first.

[@pranavmawlong4057]

Thanks for the video bro, it helped and both are working fine

[@chuckp32]

Thanks, just installed on Galaxy 5 watch and OnePlus N20

[@moseslouis198]

Works like a charm! thanks, buddy.

[@keonbesson1358]

Thanks. Worked in Trinidad and Tobago.

[@fitterniti]

Works great mate. Two questions. Do these affect overall battery consumption? and what's the difference between heart rate and blood pressure monitors? They seem to do the same thing

[@Onion_Knights]

heart rate - rate of your heart beat a minute blood pressure - the pressure of your blood i dont think they are the same

[@enlightened84]

Extremely helpful video. Quick and easy. Thank you for this.

[@gaumesi]

Thanks, this worked well on my Galaxy watch 5 and Samsung A73 5g (IN)

[@baptiste1007]

Thk you guy!!! My GW5 is now complete

[@davidizhaky8801]

Install went well on Galaxy Watch 5 and Pixel phone. However, when I open the Galaxy Heath Monitor on my pixel phone, I get an error "NO Compatible phone found". I clicked retry a few times with no help. Please let me know what is wrong. Thanks

[@mikaljan]

very nice and clear guide to enable blood pressure on my Galaxy watch 5, thanks!

[@mbuhardan]

Thank you man it really works in BAHRAIN

[@johngabrielgenuino2357]

nice! Thanks Capt! :) Now im using ECG and Bloood pressure. mann the watch is just few points away from being 100% accurate. Not bad!

[@r7ndom]

Thanks for this tutorial! Worked great on my phone and Galaxy Watch 5 Pro. Plus, I learned about a new tool.

[@rickbass100]

Thanks for the video. I installed it on my motorola edge 20 pro smartphone and it is working perfectly.😉

[@therabbitnews9362]

I'm in the US with Bluetooth watch 5. It would not allow adb to install the file. I'll keep trying. Update: I did got bp on the watch. And it's pretty snappy compare to watch 4. I like it.

[@aontop]

Hi.Thank you for your great efforts.I have Samsung S23 Ultra & watch 5ro.I followed all steps but I couldn't connect the watch using IP,so it failed with me.😢

[@Cloud-yo1he]

Same , I'm so sad 😢

[@ralphaboucharanek4539]

Workes perfectly, Just one question. I can't see the button where i can enable the Irregular Heart beat in the settings. Any idea how to fix tthat?

[@FaithsTekOnline]

Very helpful. This wiill surely help in maximizing my watch's special features. Thank you very much. +1 subs here from the Philippines.

[@ehudcarmeli2135]

For me, the Blood pressure is working but the ECG is not, it asks me to install a Samsung health monitor on my android phone, which was installed per the instruction, what do I miss?

[@KasRizvi]

Hi, many thanks for your guide. I have a Galaxy watch 5 and only bought it to monitor my BP. Unfortunately, it is showing readings which are 10/12 points less than the digital monitor used by the doctors. Furthermore, sometimes it shows reading exactly the same as previously taken reading. I need your advice on how to get it to work properly. All the steps you say in your video, would they produce more accurate readings? Please help out. Many thanks my friend.

[@user-bo6ms7mt7i]

Thanks, worked fine in my Galaxy Watch 5.This doesn't work on the Galaxy Watch 6 though right...?

[@mazharshaukat1300]

Bravo, so thankful, for it really started working on my watch, appreciate it.

[@GIXXER404]

Greetings, I installed the application and it works perfectly, but I have a question about how and where I can check if there are updates for the application

[@derande]

Worked great for me on 5 Pro. Thanks!!

[@fedejunin]

In my case it won't install the blood pressure monitor. I tried few times.

[@JasonGodinho-rn9ng]

Thanks for an easy to follow and short video :)

[@CesarHernandez-ks4sv]

Funcionó a la perfección, S22 ultra. Excelente tutorial. 👌

[@KasRizvi]

Sorry I asked a question below but forgot to ask that all the configuration on your video is to be able to check the blood pressure or to get more accurate results? Thanks

[@Mudaxar]

How to check if these apks are safe to install?

[@GrekTheGreat]

Thank you. Works great with Xiaomi smartphone!

[@iam_dee.a]

Thanks dude. It's working 🙂

[@SharadNidaria]

Thanks a lot for explaining it in a so easy to understand manner. It worked amazingly.

[@JJ92889]

Thank you guv. Just got it fired it up on my Xiaomi Mi 10 5G

[@swastiknath]

Thank you so much. it took just 5 min to download and setup. cheers :)

[@JustinMacsMoon]

Thank you. I have installed it on my Galaxy Watch 5 Pro. I'm wondering if that app is updated?

[@barrydrew3755]

5 star video . Well described and works a treat thank you

[@miguelsmelo]

Awesome! Gonna try it on my Poco F3, hope it works! Thanks and thanks to Dante! Edit: worked like a charm i now have bboth BP and ECG on my GW5 Pro using a non Samsung phone! Thanks again!

[@eliasbats9143]

I have also the Poco F3 and the same issues with Watch5...

[@guillermobaque4633]

Hello! I have also a Poco F3. Did it work?

[@miguelsmelo]

@@guillermobaque4633 worked like a charm!! Go ahead and try it yourself, you won't be desapointed!!

[@mckoyboni]

Can't seem to connect to my watch, already enabled adb debugging+over wifi, set the correct ip and port to bugjeager but just keep getting connection timed out when trying to connect

[@venlytech4762]

The same issue!! Please help

[@pauloesposo8406]

Still works. They even update a new mod apk.

[@mehulkumarvpatel]

Cam someone help only blood presssure part is working now and not ecg. There were no separate steps required for ecg earlier but now only blood pressure works using above steps but for ecg, it says follow instructions on phone app where it does not anything. Pl. Let someone guide us how make ecg work

[@EZETechnRC]

Thanks for the video ... I was able to install the app onto my watch 5Pro.. I live in Ontario Canada. When I bought my Watch 5Pro it came with Sasmsung Health installed . But it only had the ECG and No Blood Pressure... My watch 4 classic had both and worked great. So I installed both apps for the watch and for the phone .. so now both phone and watch have 2 apps each.. seems to be the app on the phones the stock installed icon looks normal and the one I installed has the wear W emblem on it. Inhale the 2 icons on my watch . The stock one has No BP and the one ininstslled has both ECG & PB. So when I use your app on the watch it tells me to open phone app.. I click the one with the Wear icon and it works .. when it tries to calibrate it says phones Disconnected but it's still connected . I tried uninstalling rebooting then reinstalling again and u getnthe same thing .. dosent recognize a compatible watch or says it's disconnected...

[@r3conwoo]

Why wont Samsung just enable this ?

[@maxzimmer3879]

I read that its the feds in the US that disallow Samsung to have the BP installed already. They arent finished testing yet it said. Samsung has had this available in some shape or form for 2 years now. Cmon Feds!!!

[@Brand6791dl]

Because US FCC won't allow. We love US regulations. Other countries government staffs are skinny but extremely fat people in US government staffs. Wonder why.. 🤔

[@dnguyen29dn]

It samsung it because the FDA

[@therabbitnews9362]

Samsung loves to do it in a heart beat if they can.

[@AlanTrades]

This is so annoying. All the other countries get it, that's a feature we pay for in the watch! So samsung should charge less to American customers!!