Very thanks to you.I'm earger to watch more videos about Canbus settings and AUX outputs.
@hasole96692 жыл бұрын
Thank you for this, helped alot to get my head around the application.
@welshiejon7 ай бұрын
Great video, loads of helpful information
@lewissussex6393 жыл бұрын
Great video just had EMU black, ADU5 and PMU16 wired into my car so found this very informative and useful! thanks
@manaperformanceuk3 жыл бұрын
Thanks for the kind words Lewis. 👍🏼
@amer.mt09 Жыл бұрын
same ...thanks
@hiperbzzu Жыл бұрын
Thnaks Bro. Great Help & person
@amemotorsport3 ай бұрын
Hi Sam great video,could you do a video on how to set up the ADU so you can use the buttons on your steering wheel to swap the screen pages
@denisbassom1724 ай бұрын
Thanks, very useful
@SpeedingTube4 жыл бұрын
Great video Sam, can't wait to upgrade to EMU Black + ADU
@manaperformanceuk3 жыл бұрын
Make sure you let me know when your ready 😉
@SpeedingTube3 жыл бұрын
@@manaperformanceuk Is there much pin adaption required for the Classic to Black plugs?
@manaperformanceuk3 жыл бұрын
No just a slightly different layout on the black connector.
@SpeedingTube3 жыл бұрын
@@manaperformanceuk Perfect
@shanelelliott5812 Жыл бұрын
Very good video!... Could you do a video on how to setup indicators😊
@jameshughes85433 жыл бұрын
Excellent video Sam, any chance of more ? CANbus and pumps? And setting up inputs outputs etc?
@manaperformanceuk3 жыл бұрын
Hey James. Yes I will try to get some more done. What do you mean by pumps? Fuel pump? Usually this would be controlled by the ECU
@jameshughes85433 жыл бұрын
@@manaperformanceuk Hi Sam, that was a typo, should have read PMU's. I have a PMU and ADU and still learning loads about what they can do! All the import/exports as canbus etc would be good.
@johnny_gtr3 жыл бұрын
Great video, thanks!
@honahon6 ай бұрын
So, I don't need to connect the wires from the fuel lifter that go to the ECU to use the virtual petrol tank?
@markgibson11515 ай бұрын
Hi can u show how to connect ecumaster USB to can and how to set up oil pressure in morning details please
@cezelipatrick11 ай бұрын
Great video! Is there a way to upload a “startup”/“welcome” video instead of it automatically showing the first page??
@manaperformanceuk9 ай бұрын
Yes there is, please send me an email on sam@manaperformance.uk and I can help out
@jonathantouhey13113 жыл бұрын
Hi Sam, the video was really helpful thanks for that. I noticed you had a jar of spare terminals I'm just wondering where you get the stock form? I want to clean up some of the cables going into the emu black and i need some new terminals thanks.
@manaperformanceuk3 жыл бұрын
Hi Jonathan, thanks for your comments. I have a big selection of the pins, I can sell you some if you like. Please email me sam@manaperformance.Uk
@xiang74 Жыл бұрын
Man! You know how to calibrate this ADU to Mectronik ECU? Please kindly advise, much appreciated!
@manaperformanceuk Жыл бұрын
From a quick google search it looks like it has canbus. So that is a good start. Can you select any canbus settings in the ECU software?
@justinrohrbacher14152 жыл бұрын
Can you upload custom gauges to the ADU?
@manaperformanceuk2 жыл бұрын
Not custom gauges no. But you can get a creative and make them.
@damnitdang2 жыл бұрын
If I have a emu black. And buy this adu7, do I have to retap all the sensors into the adu7? Or can the adu7 just get all the info off the ecu via canbus?
@manaperformanceuk2 жыл бұрын
Hey. No need to rewire, you can send all the info via canbus from the EMU Black to the ADU.
@slicktop2jz8553 жыл бұрын
How much is an emu black posted to Australia man?
@manaperformanceuk3 жыл бұрын
Hi. Because of the dealer network I can’t sell to Australia I’m afraid. Please get in contact with sales@racehead.com.au
@damnitdang2 жыл бұрын
What if my datsun 240z don't have speedometer any more.. does it have built in gps to give speed data?
@manaperformanceuk2 жыл бұрын
Hey, ECUMaster do a GPS to Can Module for this reason.
@Schassisdj3 жыл бұрын
Hi Sam, Great video, used most the content to setup my ADU . One thing im struggling on however is getting the AFR gauge to work, *canbus to emublack* it seems ecu master has a fault whereby ecu.afr will not simply pull the data across and instead they say use make a table from the lamda sensor calcs *14.7 however im struggling to do this. Any suggestions ? Cheers Damian
@manaperformanceuk3 жыл бұрын
Hi Damian. Thanks for the kind words about the video. Making a math channel is going to be in the next ADU video I do. If you’d like to email me then I could send you an example if your desperate. Thanks Sam
@aleks11662 жыл бұрын
Can gear sensor be calibrated on adu ? Or must the sensor go to ecu, and then to adu ?
@manaperformanceuk2 жыл бұрын
Hey. Yes a gear sensor can be calibrated to the adu. No problem. Use -1 as reverse and 0 as neutral.
@joiescazchen89342 жыл бұрын
can u show the usb data log function?i think that’s interesting,but no one showed.
@manaperformanceuk Жыл бұрын
Yes I’m planning another video and will include this.
@damnitdang Жыл бұрын
Can the adu display ethanol content if I wire in a flex fuel sensor?