Edelbrock E-Street EFI System Installation

We install Edelbrock's self-learning E-Street EFI and Universal Fuel Sump system on PHR's 1968 Chevy Nova project car.

[@paulfrankelphd]

Sounds and looks sweet! Nicely done.

[@puka5939]

If it's such a good product why is it discontinued? what about all the necessary parts and sensors that go along with this throttle body in case they need to be replaced any time in the future? Is customer support on the product going to be available or phase out? The end user is spending a lot of money so I hope the customer doesn't get left high and dry.

[@JLSGsmargian]

It looks so simple I can't believe anyone has not came up with a system like this before now. I would also like to know what keeps it from over filling the sump?

[@woodgarage5054]

it has a float set up in sump.3:54 in video.

[@mio4548]

Hi, in my truck I have two headers and two outs, but the EZ-EFI system comes with just one oxygen sensor. Please tell me if I must install two oxygen sensors (and how can I do that) or just with one oxygen sensor in one of the outs is enough. Thanks

[@emmanuellopez5037]

did he say self learning system??? Ooo shit SKY NET!!!

[@JDB5824RG]

what is the point of this if you don't share the results ?

[@michaeltallent247]

hey i have a 89 rs 305 camaro with obd1, i need to know if it is ok to replace the old ecm with this

[@tonypacheco5105]

I purchased this product last October still don’t have it running right try to get a hold of technical support but that’s a joke there’s one person serving all of Edelbrock’s EFI and he so busy he don’t know what to do if I was you I would not buy this product

[@slimjim119]

great but how does it drive

[@improvisewitme]

What kind of rims are those? They are sweet!

[@nathan00campbell]

as cool as these are i think everyone has lost their minds on the cost side of things, its more than twice what it should be

[@peterdelage6759]

The oxygen sensor is not correctly installed, the angle is incorrect per the instruction manual

[@wvresident7004]

Deer Santa....lol

[@johnmoorhousedecorated-nam899]

Is this similar to the cross fire injection offered in 1984 from Chevy corvette?

[@pvtmoore193]

+john moore No.

[@alexcorona]

This is more similar to the Type of fuel injection they ran on Chevy trucks in the 80s, it was throttle body style.

[@seansmithyman6549]

Looks like your HEI is out a tooth?

[@MrDoctorchama]

can you check my car do you have a shop in torrence???

[@Mr500RWHP]

So if you're running a mech fuel pump what stops it from over filling the sump?

[@v8rwd731]

the same thing that keeps the mech fuel pump from over filling the float bowl of a carb I am guessing.

[@marzsit9833]

the sump tank has inlet floats just like a carburetor or toilet that shuts off the liquid flow automatically.

[@mikesrestoration]

They didn't tell how much additional power it made, since it was probably 5 horsepower. Hard to justify 2500 bucks for 5 HP. In my world at least.

[@ZaganStoanes]

I have seen video's of some of these kits and they lose 10 hp

[@harperjmichael]

And what was the resulting difference on the dyno?

[@ZaganStoanes]

-10 hp

[@FoundationElectronics]

nice setup! a large bit out of my price range though, approx. $2600 usd, oh well, i'll stick with carbed engines,,,

[@SpeedrunTnRC]

Yeah the fitech 600 power adder is 1195 I simply can't afford over double the price

[@kaisjhimi4432]

can t we use just carburetor without efi ?

[@rcdkfjdj]

It said DO NOT START! :)

[@adrianenealy8160]

2500 for a system that doesn't come with the fuel system unless your running the sump system like they are is too much money when msd and fast comes with absolutely everything. this is a good looking system with the big unneeded touch screen but, to have to pay another 550 for the fueling system kind of killed the appeal. I went with the Msd and fast on my customers cars and mine.

[@swtnlnly]

After seeing the prices on this system...I was laughing.... I'd rather drop a L98 in and grab a ECM and harness out of a junk yard....Come out a hell of a lot cheaper.

[@crannyscustoms]

Oh and a wideband o2 sensor should never point down. Ever. Should be level , or even better , minimum 10 degree angle up.

[@jbsjunk]

I'm still not sold in this set up. The Atomic EFI is cleaner and much more cost effective. Who needs some tablet that will need to go somewhere and will most likely be damaged somewhere down the line. Isn't that o2 sensor a few feet to far to the rear to be effective? I thought standard practice kept it within a foot from the collector or on it. This is not a good sales tool, too many distractions there that takes your eyes away from what is supposed to be done.

[@journeyquest1]

Strapped it right next to the radiator. Hey while your at it strap the ECU to the headers. Ugh.

[@journeyquest1]

PS I can tell you anything with Edelbrock name will be high bucks. $$$$$

[@rocksteady8986]

It operates on bluetooth not wifi

[@ZMANPERF]

Dam if that isn't slick.

[@porschetech72901]

please please lie to me an tell me yall went back and wired this for realz .... please.....

[@SpeedrunTnRC]

Stick to making intakes lol

[@crannyscustoms]

Those are not push lock fittings noobs. Those are hose barb to AN fittings.

[@Bige4u]

Eldelbrock.... over priced products compared to their competitors compared to others that give you more for your money.

[@ben54322]

+Bige4u bro what other brand you recomend?

[@TheAugiedoggie1]

+Bige4u Eldelbrock.... over priced products compared to their competitors compared to others that give you more for your money. Yea I'll ask you also. What other system is cheaper. If you can't back your statements up maybe you should keep your mouth shut!

[@tonybailey5982]

+TheAugiedoggie1 FItech

[@G-Revbw]

MSD Atomic EFI!

[@uhfnutbar1]

this over price shit

[@PeterHatch-mx7zc]

Most of this is crap e.street no good