Рет қаралды 24,847
This video is about installing a swing-down edge guide on a Cowboy CB-4500 sewing machine.
The steps shown will also work on other Juki TSC-441 clones that lack the pre-drilled and tapped mounting holes on the back of the machine head.
Since the Cowboy CB-4500 lacks the mounting holes required to install the swing-down edge guide, you have to drill and tap holes. You also have to make an extended hand lever for manual foot lift operation (or you can just remove the manual lever and only use the foot pedal only for presser foot lift.)
Parts used in this video:
KG-967 swing-down edge guide
KB-205 adapter bracket
I've sourced my own edge guide directly from a manufacturer. It is available in my webstore:
uwe.store/prod...