Edge Painting for Leather Work

[@bigfranksworld]

The tip on using the eraser on the over-painted edge will be a game changer for me. I have been struggling with this. Thanks for the video!

[@theogsg5648]

Such a GREAT tutorial, so clear and easy to follow, thanks!

[@TeranAtelier]

Glad it was helpful!

[@natalyguerrero9875]

WOW BEAUTIFUL WORK!!!!!!

[@alicepang931]

Wow! Best tutorial on this topic I’ve found so far! Thank you

[@TeranAtelier]

You're very welcome!

[@fizzybags5690]

Very very helpful. THANK YOU❤

[@TeranAtelier]

You are so welcome 👍

[@alexanderguzman3174]

excelent explanation, easy and step by step!!!

[@TeranAtelier]

Glad it was helpful!

[@smcvsm]

Wow thank you for the video. You explained perfectly.

[@TeranAtelier]

I am glad you found it helpful!

[@scottshirey2541]

Just tried it. I’ve been working with leather for a long time and never thought of putting heat to the edge paint. It came out really well. Thanks for sharing.

[@TeranAtelier]

Glad to hear it 's working for you

[@qwagmire9867]

I'd like to thank you, I've just started Leathercraft and I'm using shark and Ostrich, and this has helped alot. It takes time, but the results speak for themselves! I can't wait to make your watch strap!

[@TeranAtelier]

You are very welcome! I would really like to see if you make something from my patterns. Good luck 👍

[@KyawKyaw-YGN]

thanks teran

[@anthonyphillips7642]

Great video 👍🏽

[@TeranAtelier]

Thank you! 👍

[@treetopspider]

You explained this perfectly. Thank you for the upload

[@TeranAtelier]

Glad it was helpful!

[@HappySnailDIY]

Thank you for sharing. Do you have video showing how to dye chrome leather egde?

[@TeranAtelier]

You are most welcome! Generally chrome tanned leather is only edge painted or the edges are turned (folded over). The edge painting steps for both vegetable tanned leather and chrome tanned leather are the same and the steps in this video can be followed.

[@muraty2156]

Very informative... Thank you.

[@TeranAtelier]

You are welcome!

[@lemonhead250]

Thank you so much

[@marioveiga1166]

Beautiful

[@majedysieed5112]

awesome!!

[@saraking4444]

Wow! What a beautiful technique! This is done on the finished product, yes?

[@TeranAtelier]

Thanks! These are the steps for the finishing the edges on products which I use in all my videos.

[@jalehz1228]

@@TeranAtelier pelase can you help me.. Does i must use a base coat before pain, (examp Giardini, Fenice, Fiebings) or i can paint without base coat? Im little bit confused with fiebings product…

[@TeranAtelier]

As I understand, Fiebing’s does not have a base coat product. A base coat is definitely a good thing and may save a few applications of later edge coat. However, you should still be able to achieve good results without base coat but it may take more layers.

[@jalehz1228]

@@TeranAtelier tnx a lot, Because i have bean little bit confused, i order Fiebings product and one of them its edge coat ( i think “coat” means like a base coat) Can you tell me one more think, is it better to not burnish the edge, for better aply paint, is it true if i make smooth top layer, the color not aply very vel..

[@CoriMultipass]

Very helpful, thank you!

[@TeranAtelier]

You're welcome!

[@AzraLeather]

Thanks for this tutorial... i test it sure

[@TeranAtelier]

Cheers!

[@mariagrzegorzewicz2250]

Thank you!!❤

[@TeranAtelier]

You're welcome 😊

[@mdramk93]

This video was very helpful for me, thank you :)

[@TeranAtelier]

You're very welcome!

[@pequodexpress]

I can't find my comment about the Vulcan electric creaser, so I will just comment here. The machine works well, but I'm beginning to wonder if stainless steel might not be the best type of steel for the creasing tips. I wonder if Regad uses tool steel.

[@TeranAtelier]

It looks like stainless steel is the most common material to use otherwise it seems to be brass. What kind of issues do you have?

[@mikedegrazia]

Thank you!

[@TeranAtelier]

You're welcome!

[@thalia1206]

My Chloe Drew *2k euros bag* fall apart, the edging just cracked on top as it was not sewn :O I took it to repair but they glued it badly and some of the edgings are gone ( was cut I guess) I watched your video and ordered paints online to fix it, took me about 20 minutes of mixing different gray brown colors to match the edging of my bag ! also mine isn't as shiny as yours as I don't have Wax, I used Mink Oil to make it look descent :) Thank you for the video!

[@TeranAtelier]

You are welcome! Sounds like you did a good job saving that bag.

[@guidelineuk]

🙌🏽😎 my next step on my leather making journey.. ways enjoy your videos thank you so much❤🧘🏽‍♂️

[@TeranAtelier]

You are very welcome 👍

[@timmang7891]

Thanks mate, it was really useful. I ruined a beauriful bag with my horrible edge paint application technique, I'm sure it won't happen again with your technique!

[@TeranAtelier]

Thanks! You may still be able to fix it with some natural rubber and some edge sanding. Good luck with your next project!

[@TheGizmoGremlin]

Bought everything for my first edge paint now but before I start - one more question, for how long do you let it dry between the multiple layers and at the end? Thank you already!

[@TeranAtelier]

You are welcome! It is important that every layer is completely dry before trying to sand it. Normally they say 10-20 minutes to dry on the label but I like to leave it at least an hour.

[@TheGizmoGremlin]

@@TeranAtelier thanks! And I do have to apply heat only to the first layer when it is dry, right?

[@TeranAtelier]

@@TheGizmoGremlin The first layer is the most important to apply heat so it bonds well with the leather. Heat can be applied to other layers if you want except for the final one.

[@andrebaialardi]

Congrats. Very nice and easy method of edge painting. Question, on more dense rubber paints, im having difficulty applying it with a roller pen. It spreads out to both sides. What do you suggest?

[@jravitz1968]

Thank you

[@TeranAtelier]

You're welcome

[@КсенияКондрат-я8с]

Thank you! Very good tutorial! But what to do if I have 1.2 - 1.4 mm leather thickness?

[@TeranAtelier]

Thanks! This method will still work for thin leather and will likely require less coats.

[@gidannodza]

I love your cutting mat, errrm could you point me to where I might find something similar please? Thank you 😊 Great tutorials by the way, learnt and still learning a lot.

[@TeranAtelier]

It is called a self-healing cutting mat. They are great surface to cut on, I am using an A1 size which covers most of my bench top. You should be able to find them fairly easily online.

[@rontan1691]

hi, great video, may i know what electric edge creaser do you use ?

[@TeranAtelier]

Thanks. The one I am using at the moment is a modified generic soldering iron. I use it with a good FN2 tip that I got separately which is connected using a short M5 thread bar. It does the job so I have not felt the need to upgrade to a proper edge creaser yet. I recommend it if you are looking for a budget option.

[@lolomgwtfun]

Hi ive got a question For step 3 you say that we can dry burnish the edge if we dont have a heating tool, how long would I have to burnish it? Apologies if this is a dumb question, I've not worked with leather before and I am trying to make a single leather piece for a costume

[@TeranAtelier]

You only need to burnish until you get your desired level of smoothness/shininess. Normally 10-20 seconds is plenty.

[@henriquesantos.official]

Hi Teran, how long does your paint take to dry for each coat between sanding and painting?

[@TeranAtelier]

Hi. It depends on a few things like paint application thickness, viscosity, brand etc, but normally at least 30 minutes. Make sure the layer is properly dry before beginning to sand it.

[@baroudeur50]

Hi Teran...which kind of wax do you use there ? It appears to be more white than bees wax ?

[@TeranAtelier]

Hi, the white wax is paraffin wax which is more suitable for edges as it will be less sticky than beeswax.

[@amirrezazeydizadeh2089]

thanks♥️♥️♥️🙏🙏

[@TeranAtelier]

You are welcome 👍👍

[@fernandopolania]

Great video. I have a similar electric edge creaser than you. The tips that came with mine are not the best quality. What brand of tip is the one you used in this video? It looks well made. Thank you.

[@TeranAtelier]

Thanks! The FN2 tip I use is not branded. The model FN2 is the tip style and dimension so it should not matter which brand it is, but perhaps the materials may differ. I bought just the FN2 tip on Aliexpress that comes with an M5 female screw which I adapted onto my electric edge creaser using M5 thread bar.

[@fernandopolania]

@@TeranAtelier thanks. I appreciate it.

[@TheStrawberry4]

@@TeranAtelier Thank for your video, very instructive. I'm about to buy an electric creaser, which model are you using in the video ?

[@TeranAtelier]

@@TheStrawberry4 The creaser handle I use is a basic 60W soldering iron with temperature control. The most important part is the creasing tip which I use an FN2 tip. This is the most popular tip for crafters and I highly recommend it.

[@TheStrawberry4]

@@TeranAtelier Okay thank you, and again, great video, one of the best I saw about burnishing chrome tan ;)

[@HughWheelerDrums]

When are you edge bevelling? Before you start this process, or not at all?! Thanks

[@TeranAtelier]

Hi, edge beveling is not required when edge painting which makes sense as the edge painting needs to be compatible with softer chrome tanned leathers. It is the paint itself that rounds the edge when it is shaped by the sanding steps. The edge creaser also helps to round off the edge too.

[@jalehz1228]

​@@TeranAtelierI want to first thank you for the video, by far the best video on the internet. since I'm new, I have a few questions and your answer would help me a lot, and I believe other followers too. * are there differences in colors, such as "ordinary colors" and acrylic colors, and do I have to use a primer before acrylic colors when it comes to chrome tan leather. * do you have any suggestions for sanding chrome tan leather because when I sand it with sandpaper it happens that the leather flakes more and more, also with the edge beveler I can't shorten the edges on chrome tan leather :( ... * how long should I heat the paint, is it enough until the paint starts to melt?... * can i end up using tokonol instead of wax? sorry for the long post, but it will be useful to have information in one place? thanks again

[@nattanicpornpathumchaikit1152]

Thank you very much 🙏🏻❤️✨ very very nice

[@TeranAtelier]

You're welcome! 😀

[@olivercillian]

Thank you for the video. For drying, can I use a fan or hair dryer(cool) to dry the paint faster between coats?

[@TeranAtelier]

Blowing air onto the paint may make it flow and ripple. Best to find something else to do while you wait for it to dry.

[@avashnazari3131]

Please teach the watch strap as well.thank you

[@TeranAtelier]

You are welcome! Have a look at my stingray watch strap video kzbin.info/www/bejne/f6eXXoifoc-LmpY , I am planning some crocodile watch strap videos in future too.

[@avashnazari3131]

Thank you for informing me. I will definitely download it. You teach very well. I learned a lot from the video of making a wallet.

[@carolinethomas4386]

Could you please tell me what is the measuring tool you have , it looks like a little clock and very handy ! Great video

[@TeranAtelier]

Thank you! It is called a dial thickness gauge (0-10 mm model). I use a cheap generic model which works fine, you can find them for around 5-10 dollars on online marketplaces.

[@carolinethomas4386]

@@TeranAtelier Thank you !

[@keatman]

Thank you for sharing the secret!

[@TeranAtelier]

My pleasure!

[@keatman]

@@TeranAtelier By the way, can I use other types wax? What does paraffin wax differs from other wax?

[@TeranAtelier]

@@keatman Beeswax is the best for the edge but it is a bit sticky and picks up dirt. Paraffin wax is not sticky and makes the edge very smooth and shiny which is why I have been using it. The best wax is a blend of both waxes normally around 50/50.

[@dawlamadaniya6800]

شكرآ على هذا الشرح

[@TeranAtelier]

You are welcome 👍👍

[@arianejanebernarte126]

I'm repairing a bag and search this video, my problem is leathee edge i wanted to coat is so fluff. The more I sand the more fluffy it gets. Do you any soilution for that?

[@HKPang-b4g]

Hi Teran can i apply Tokonole after sanding? Follow by Fiebings Acrylic Edge Paint.

[@TeranAtelier]

Hi. Edge paint is best done after sanding the raw leather edge. If you add Tokenole before edge painting you will risk poor bonding of the paint and the paint may peel off in future.

[@TheGizmoGremlin]

Great video, thanks! If you have to mix multiple colors to match the color of the leather - How do you prevent the rest of the mixed dye from drying as well, when applying multiple layers? Thanks in advance!

[@TeranAtelier]

I mix just enough for a project which is normally around 5 ml in a small container with a screw cap. That normally can keep it for drying out for a long time if it is properly sealed. In my videos I use a contact lens container which is the perfect size.

[@BrunoWowCs]

Can i use regular rubber?

[@mahdeealoo69]

Great explanation. I just want to edge a Coach belt I've had for years. Edge needs finish.Thank you for your clear steps.

[@TeranAtelier]

Thanks! Good luck with your belt.

[@englishmuffin4640]

What's a good temperature for smoothing the wax?

[@TeranAtelier]

There is no exact temperature as each electric creasing machine has different settings. When smoothing wax, the wax should become clearer only briefly after passing over it with the electric creaser and then return to its normal colour.

[@englishmuffin4640]

Thank you@@TeranAtelier . The other problem I ran into was, after using the electric creaser to smooth the edge paint, the paint leaves a residue on the tip that's very hard to remove. Do you know of a good way to clean the tip? I tried soap, alcohol, nail polish, but none worked that well.

[@louisgianfrancesco]

Would you say you need a filetuse to attain such a smooth surface? Or is it all in the Sanding?

[@TeranAtelier]

It can be done with sanding alone but the heat treatment helps to adhere the paint better to the edge and also helps to smooth the paint to give you less sanding work.

[@Robert-xp4ii]

I've painted a couple edges but haven't with items I've sold. My fear is the paint will come off prematurely and make my product look cheap. Yours looks amazing though and makes me want to use the technique more. Beautiful work!

[@TeranAtelier]

Thanks! The heat treatment step is very important to get the paint bonded properly so it doesn't peel off later. Painting does take a lot of extra time, I only really paint with exotic leathers, if I am working with all veg tan I prefer burnishing.

[@DHArts-ej8wc]

@@TeranAtelier On vegetable tanned leather, I do it like this, I use the same dyeing paint as the leather and paint the edges, then dry polish it, so it will never peel off because the dyeing paint is thin and penetrates the edges better.

[@lowspeak]

Do you have any tips on how to clean the paint off the roller?

[@TeranAtelier]

Alcohol can help to dissolve the paint otherwise just mechanical cleaning. I have started using a smooth type applicator from Crimson Hides which is really easy keep clean.

[@bradleycannncreate9461]

Hi Teran! I have learned so much from your videos and always look forward to what you will do next. I am struggling with edge pairing currently. I can complete a simple strap like this beautifully, but my issue comes when I am trying to finish the edges of a wallet that is stitched together, it seems that the paint never dries evenly, globs form on corners or wherever gravity takes it, etc. could you do a tutorial on this or do you have any other resources??

[@TeranAtelier]

Thanks! Make sure you mix your paint uniformly before you use it and try to get all layers even. You can try adding a bit of water to dilute the paint to make it thinner so you can get thinner layers, normally limited to around 10% added water depending on the brand. Corners and curves can be a bit tricky but thinner layers will stop the paint from running due to gravity.

[@pameladalton2457]

So, how do you finish the edges on chrome tanned leather?

[@TeranAtelier]

Generally chrome tanned leather does not burnish well. The best ways are to turn or fold the edge over before stitching, or to apply edge paint. The edge painting steps are the same for veg tan and chrome tan leather.

[@pameladalton2457]

@@TeranAtelier many thanks

[@jalehz1228]

​@@TeranAtelier buddy i need help... when I paint the edge (in 2-3 layers), the paint starts to crack when it dries, when bending the leather.. do you know if the cause could be bad paint or something else...

[@pequodexpress]

Nice edge finish without using any of the "paints" but just dye and wax. How well do you think that finish will hold up to abrasion, such as abrasion experienced with a belt?

[@TeranAtelier]

Thanks! I have since started using Vernis which is much much better. The Fiebings however is still holding up well with my watch strap so far but for a belt it probably is not going last.

[@pequodexpress]

@@TeranAtelier I've used Fenice, Giardini, and one or two others. Lately, I am hearing that Uniters is something to seriously consider.

[@TeranAtelier]

Nice. There is only one way to find out 😅

[@dukehorndrake5525]

Does this also work for Fiebings edge kote?

[@TeranAtelier]

Yes it is similar product, but I have not tried it myself.

[@deaveedis6295]

Hello, For the step three, apply heat to edge, how hot, 250 degrees?

[@TeranAtelier]

Hi, it is hard to give an exact temperature but it needs to be quite hot to smooth out the edge paint but not hot enough that it makes smoke.

[@oldiowan]

Very nice video!! Question - Can a person use regular acrylic paints or do the paints HAVE TO BE paints made SPECIFICALLY for painting leather EDGES? THANKS!!

[@TeranAtelier]

Thanks! The acrylic paint should be made for leather as it needs to be flexible. I recommend one of the proper leather edge paint brands; Vernis, Fenice, Giardini or Uniters. I am now using Vernis and it is much better than Fiebings in the video.

[@oldiowan]

@@TeranAtelier MANY THANKS!! Just wanted to make sure before I spent money!!

[@shellysun5348]

@@TeranAtelier Hi, could you please explain a bit more of why you feel Vernis is better than Fiebings? I’m using Fiebings, but haven’t tried Vernis before so would like to know the difference before I make a purchase. Thank you for your help! 🙏

[@TeranAtelier]

@@shellysun5348 The Fiebing's Acrylic Paint is not made specifically as edge paint and does not behave as well as other edge paints. It doesn't dry as fast, doesn't sand as well and I think is less durable than Vernis. I have not tried the proper edge paint from Feibing's but they only have a limited range of colors which I don't find useful.

[@shellysun5348]

@@TeranAtelier Thank you so much! I learnt from another video to use edge foundation before edge paint. It didn’t go well in the end as the paint went off the foundation layer easily. I’m going to trim the edges and try your way. 👍👍👍

[@timecorner3421]

What is the paint removal did you used? Thanks.

[@TeranAtelier]

It is a piece of natural rubber. I have added links to it in the video description.

[@desbyberlianty8243]

Hi there.. I used leather balm to moisturize my bag and the handle as well. Yet, after i applied the leather balm on the handle, the edges started to get peeled off and soft. Is it normal?

[@TeranAtelier]

That is not normal. It sounds like the leather balm was not compatible with the edge paint and caused it to soften and peel.

[@moriel01]

*_Hello. May I know the best glue for leather?_*

[@TeranAtelier]

Hi, I am always using water based contact cement such as Aquilim 315. You can see the benefits in my video: kzbin.info/www/bejne/aKacdX1_eZufqK8

[@omarmohamedali8312]

Where can I find the chemicals for leather edge?

[@r.casagrande8689]

How long to wait between the coats?

[@TeranAtelier]

It is important that every layer is completely dry before trying to sand it. Normally they say 10-20 minutes to dry on the label but I like to leave it around 30 minutes or longer.

[@StudioMarlow]

What gum did you use to remove excess paint ?

[@TeranAtelier]

It is a rubbery product that acts like an eraser. Try searching for 'natural raw rubber for cleaning leather' they should be quite cheap.

[@lordjenna]

Can I use bee wax instead of paraffin wax?

[@TeranAtelier]

Beeswax will also work but it tends to make the edge a bit sticky

[@MarshyIsMellow]

is this edge paint or leather dye? Is there a difference?

[@TeranAtelier]

This is edge paint where you build up layers of paint which is used for finishing edges on most factory made products. Leather dye is normally only used with veg tan leather where you apply dye to the edge and then burnish smooth.

[@motion9047]

Is higher grit like 1500 or 2000 better? Or can i use 120?

[@motion9047]

And is sandpaper or stone better?

[@TeranAtelier]

Sandpaper is best as the paint dust will stick to it and its easy to replace. 120 grit is too coarse and would not work well. 400 for starting and 800 for finishing is fine, I would not go finer than 1200 as it does not help much.

[@motion9047]

Okay thanks been experimenting on paint recently i can't make it fine because 120 is only what i have but i tried burbishing using tissue luckily it somehow helps

[@TeranAtelier]

@@motion9047 Edge paints will smooth out with heat and friction but sanding is important if you want to get a uniform shape. I do recommend picking up some finer sand paper as it will help you with all edge finishing including burnishing.

[@motion9047]

@@TeranAtelier I've tried using i think is 600 grit and it worked well but the paint went through in between the leather and spilled through stitches what can i do to prevent it

[@passioncreativity7904]

Can I use edge paint on leatherette

[@TeranAtelier]

Yes it should would work fine

[@alo.com234aloo2]

Where can I get the finish paint?

[@TeranAtelier]

There are a few different brands of edge paint available such as Uniters, Fiebing's, Giardini, Fenice and Vernis. You should be able to find one of those brands available to you in store or buy online purchase.

[@willywolio]

apa namanya yang ada.diujung solder listrik itu??

[@alievvasya]

👍👍👍👍

[@TheBagMakersWorkshop]

I noticed you used dye instead of paint? And you didn’t mention that it was a heatable dye? Did I get this wrong?

[@joseluismartinezaguilar8562]

Too much time

[@TeranAtelier]

Yes it is very time consuming but it does give nice looking edges.