EdGun Leshiy 2 - Changing the Power Jets/Nozzles & Adjusting the Regulator to Fine Tune

After a tedious prolonged six month wait for my Leshiy 2, once I received it I wasn't impressed with the UK distributors so called tuning skills.
My gun was very noisy, the power was inconsistent and the accuracy was a joke !
This video is a demonstration on how to fine tune an EdGun Leshiy 2, by changing the Power Jets/Nozzles and adjusting the Regulator to help improve:
1. How loud it is
2. Power consistency
3. Accuracy in Sub 12 Ft lb
4. Shot count.
More Leshiy 2 videos to come.
If you are interested in anything EDGun Leshiy 2 related, please subscribe and hit the thumbs up button and join my Leshiy 2 MeWe Group: www.mewe.com/join/edgunleshiy2group

[@edgunwestLLC]

I would like to add a suggestion. Check the holes with a go/no go pin set. Since the smaller hole jets are never used by the factory, but they are made for customers. Edgun gunsmiths in Russia will drill out jets that say 0.2 to 0.5 or 0.7 when setting up guns in the factory. Unless you bought the jets separately don't go by the markings found on the jets with your gun

[@5euk]

Good point to make thanks Brian.

[@garyeyser3949]

Great how to video!!!!! I don’t live in the UK, so I don’t have to worry about sub12 but it was all great information.

[@5euk]

Thank you mate. The Leshiy 2 has evolved a bit since I made that video. Cone join my NeWe chat group where there are lots of other Leshiy 2 owners with lots of help & tips.

[@criminalbrewing5509]

Finally, a video with our most needed information.

[@ianbath4776]

Very informative, excellent video. Thanks

[@bigfanproductionz]

Great Vid!! Well done!

[@OCDfish]

Great video thanks. Can you do a video about removing the aftermarket reducer sleeve that has been fitted behind the puck please?

[@5euk]

Thank you. As I've taken mine out already, I haven't currently got another Leshiy 2 to film with that still has one in. Sorry.

[@OCDfish]

@@5euk was it easy to do? Did it leave a mark where it’s come from?

[@5euk]

@@OCDfish Join my group mate: www.mewe.com/join/edgunleshiy2group and I can help you through it.

[@tonyashton780]

Very good easy to follow video with solid common sense advice.Any one adjusting a pcp rifle needs to be aware of safety requirements.Adjusting your PCP to over 12 ftlb with out an FAC is not only stupid it's criminal.11.6 ftlb .22 Hades pellets will still retain nearly 5 or 6 ftlb at a 45 yard target.Accuracy is everything a 100 ftlb missing a barn door is no use to anyone.Well done fella nice to show the chronoing at under 12 ftlb iv just subbed.Hoping for some more quality content.Cheers stay safe all the best.Tony

[@5euk]

Thanks mate 👍🏻

[@tonyashton780]

@@5euk My pleasure

[@gregorteply9034]

Oi mate you got loicense for that comment?

[@testtor2714]

11 footpound or 14 Joule? That would be nothing. How do you turn it into FAC specs or as you call it factory settings? Or did you actually show that and I didn't get it ("take out the jet completely)?

[@badvboynofear]

Hi I know it’s a year later I have uk 177 what will be the best size jet are you still happy with the 1mm what bar pressure were you getting in the chamber I heard any lower. Than 65 pellet loses Accuracy after 25 yards thanks

[@5euk]

Join my MeWe group mate as there are over 300 members on there sharing tips.

[@jujuanblunt3495]

What's the best way to increase power use what power jet combination.

[@5euk]

Maybe join my Meme group and ask some of my members.

[@user-de1in5vm1z]

Whats the Name of the Group. Tried to enter but Till now no conformation..

[@user-de1in5vm1z]

I tried to enter a edgun leshiy Group

[@sonaxtom2417]

hi. which nozzles are installed in the FAC variant. thanks tom

[@saltire546]

A full tune up kit can be purchased which includes transfer port pucks and a selection of jets if i recall its around £124 .

[@Simo260681]

@@saltire546 where would I go for a tune up kit pal

[@silverload3622]

Did the 2 mill jets give a lot of power??

[@stewy1412]

What size bottle do you have on there?

[@5euk]

It is a Best Fittings 220cc bottle.

[@jaysteele5507]

Can I ask what puck diameter are you using?

[@5euk]

About 2.4mm

[@SUM1SLY83]

I have the E.A.R on mine and can’t get it up past 8-9 ft lbs the adjuster screw won’t turn any further, what am I doing wrong ? What size puck hole should I have, will it go up if I increase the puck hole size ?

[@5euk]

It could be a number of things but you need to check what size the hole is in the Puk first. Maybe join my Leshiy 2 Mewe group for advice/help. 👍🏻

[@kerrywilliams9995]

Do you work on other people s guns

[@5euk]

Yes I do. I have tuned about 35 to date for people that all seem to be happy with the results !!

[@clyde305]

Bonjour , je n arrive pas a m inscrire ....

[@5euk]

Je ne sais pas quoi dire ? Copiez et collez simplement le lien Web dans votre navigateur.

[@clyde305]

@@5euk En fait j ai rempli le formulaire et repondu a la question ; "semi automatique " et quand je valide ; rien ne se passe .

[@5euk]

@@clyde305 Je ne sais pas alors ?? MeWe est-il disponible en France ?

[@winstonchurchill6506]

What size puck 22 cal for around 20 joules +

[@5euk]

Sorry, I can only advise on 16 joule due to UK laws.

[@robinmoore1994]

eddgun say quarter turn is plus30 bar

[@5euk]

I'm EdGuns UK repair/warranty guy mate (and have been for about 3 years) so only know what I know. 😂 To be honest I haven’t worked on the older type regulator now for probably at least about 18 months. It’s the newer E.A.R ones or Huma I seem to fix nowadays.

[@robinmoore1994]

sorry man,no diss meant have added 600 ap brrel and cannot get to index,i open breach it jumps round,also if i changebarrel back to 350 ap works again,any ideas ,i feel barrel maybe to long,

[@5euk]

None taken mate. If it works with the shorter barrel, it must be how you've installed the longer one.@@robinmoore1994

[@robinmoore1994]

i have carefully installed the barrel although it mabe proud a whisper although i have put it under tension before tightening,i beleive the barrel is machined longer at the end,if you have any advice it would be great as i have spent a fortune to have the best and its not working out@@5euk

[@5euk]

If the barrel wasn't bought from Edgun, it could be machined differently at the end so there is not much you can do I'm afraid.@@robinmoore1994

[@horstwittmann5198]

Durch den dunklen "Hintergrund" (Schaumstoffblock) ist alles unübersichlich geworden ! Mir fehlen die Grossaufnahmen (Closeup) .

[@5euk]

Tut mir leid, Kumpel, die meisten Zuschauer fanden es jedoch hilfreich.

[@horstwittmann5198]

@@5euk Bei meiner Kritik ging es nicht um den Inhalt (Now How ) - den ich gut und didaktisch finde - sondern nur um die Darstellung der Leshiy-Einzelteile !

[@5euk]

@@horstwittmann5198 Okay, schön, dass es dir gefallen hat !!

[@60gib]

For the price of these guns you shouldn’t have to change or fix anything. I was going to buy one but seems like a lot of money and it can still get messed up.

[@5euk]

Maybe you don't fully understand the concept of the gun then mate. One of The Leshiy 2's selling points is to be able to swap over the barrels/calibres, so you would then need to be able to adjust the power in order to keep it legal and below 12 ft lb. My video is simply showing/helping people to be able to do that.

[@iliyabezfamilii]

Ни Хера Не слышно