Edgun Leshiy 2 Locked regulator

Whacha gonna do???

[@edgunwestLLC]

For further explanation every regulator can be turned off if adjusted too much. Remember that the adjustment is sensitive. It is better to go slow and check the regulator pressure several times rather than one big adjustment. When mistakes happen , it’s not the end of the world , just go slow and remember this is all about fun!

[@danieldawe216]

I was waiting for this video 😄 I remember when you mentioned in previous videos about what a ball ache it is if you shut the reg off. For the leshiy 2 owners out there, don't guess it. Just buy the reg tester and have that peace of mind.

[@WillRomansAirgunworld]

Your a mad man Brian....lol I will definitely be extra careful to never turn down my reg to low... i definitely would not want you to do that demonstration agean awesome information to know...👍👍🇺🇸

[@algasporthunter3062]

great teacher don't forget to come back

[@russelltrumble245]

Very resourceful, that was a little scary.

[@ozarkmountainoutdoors3255]

nice one Brian..if I needed to I will just turn it up for more power when shooting heavier projectile of course give you a call first hahaha...on with the next video lol...

[@USMCGUY2020]

Same thing happened to mine but the bottle has 150bar of pressure in it can i still do this under so much pressure?

[@stevenfrost2222]

My reg locked from new it was a replacement for a faulty EAR , Gases the gun up to 200 bar dry fired 4 times as I was going to turn the reg down and it locked can remove the forward plug no pressure in the reg and stuck with 200 bars worth of pressure in the bottle ???

[@Japs_Eye_Of_The_Tiger]

well done mate, thanks for sharing.

[@foxbow90]

I don't really understand, is that gauge simple pressure fit in that hole?

[@edgunwestLLC]

I explained that I had already removed the retainer

[@alfonsoyepiz990]

Well done!

[@sharp531]

What if you turn off the repr regulator? Do you just turn it back on or do you have to resort to this?

[@trunga5270]

Bao nhieu tien vai chu

[@parkerottoackley5587]

I was really thinking about purchasing one of these..But I buy airgun to shoot, not to spend my time and money working on it !

[@edgunwestLLC]

Then my suggestion is don’t open the gun and start Turing screws. This was done by the owner

[@richardupsinya6420]

yet it in your profile pic you have a gun that requires more fixing than anything on the market. Pick a lane boomer.

[@parkerottoackley5587]

@@richardupsinya6420,wrong

[@MikoMuru]

I have a leshiy 2 and havent had any issues yet.

[@electrichellion5946]

I have one also and zero issues with it. Great air rifle. Only one I need though there are others I’d like to have I just don’t need them.

[@victoraguilar4607]

How was the regulator turn off ?

[@edgunwestLLC]

if you overturn the screw the regulator can be shut off

[@victoraguilar4607]

@@edgunwestLLC over turn to hi or low pressure?

[@edgunwestLLC]

@@victoraguilar4607 low

[@victoraguilar4607]

@@edgunwestLLC Thanks again. I did what you recommended to my ls2. From 730fps to 860fps 50gr. Not back yard friendly any more it barks. Nice

[@rgilroy1909]

noice!!!!!!

[@toankie]

Is this really the only way to degas it ?

[@edgunwestLLC]

If you have put an aftermarket bottle on yes!

[@toankie]

Thank you sir !!