EDgun REPR-X Repair

How to Fix creeping Edgun REPR-X regulator
www.edgunwest.com/gun-schemat...
[e-mail]

[@MrTicofdatime]

Brian, you're the best.

[@Nick-gi6ym]

Brian thank you

[@frankiemagana8216]

We need them back in stock plz🥲

[@toddhakesley9004]

Have the origional reg type leshiy 2 . When the reapr reg "upgrade" became standard in new models I decided to purchase the new style reg for almost $300 when it became available to purchase separately. Unfortunately I didn't even get to test it out in the field as it burst my first time filling it too only 200 bar.

[@TheAsa1972]

What size bottle did you have on it?

[@toddhakesley9004]

@@TheAsa1972 no bottle , regular leshiy 2 setup.

[@Phucarrt95]

😂 cải tiến mới. Vậy nếu tôi muốn xem đồng hồ áp thì kiểm tra như thế nào? khi không còn chỗ vặn đồng hồ 😮

[@SALeshiy2]

Hi Brian i have got the other reg in my Leshiy 2 and the reg does creep. If i set the reg to 100 bar overnight it creeps up to the bar thats in my tank can you help PLEASE!!!

[@edgunwestLLC]

Replace it with the Raptor

[@hunterx2210]

so this new stock, it's not possible to put huma-air raptor regulator in. I see

[@TheAsa1972]

Whats the crack with the 350 cc bottles not filling up to max?

[@edgunwestLLC]

hello not sure I understand your question

[@TheAsa1972]

@@edgunwestLLC The 350cc bottles are not filling past 200cc after a while ,Iv heard a couple of people with the problem and now mine is doing it

[@edgunwestLLC]

@@TheAsa1972 I am curious how you measure 200CC of air in a 350CC container

[@TheAsa1972]

@@edgunwestLLC The gauge stays at 200 or just below and im not leaving a 5 litre tank valve open while im looking at a needle ..You are willing to try it? ,See if you can get 5 litres in a 350cc tank

[@TheAsa1972]

Iv also replaced the gauge