EF WAGON B20 SWAP PT 2 HSG EP. 5-30

PART 2 TO SWAPPING THE WAGON
shirts!
teespring.com/...
teespring.com/...
teespring.com/...
use code HSG for discounts!
hushperformance...
WANNA DONATE?
PayPal.com @[e-mail]

[@the_brazzy]

that music and hammering part made my day

[@iceyinferno]

best part of the video. lol

[@t3amflyboys]

Orlando Rivera same here lol

[@Salart123]

That hammer music bit is the best thing I seen so far. Double like

[@TheBrownGarage]

me and my brother are doing a b18c swap into 90 integra right now and these EF vids are helping, i thought it was going to be like eg/ek/dc but ran into problems youve mentioned

[@СтаниславРекичинский]

Good afternoon Mark! Good afternoon guys! Nice shuttle, nice project!) Just would like to share some information, i've made b20b swap in my 94 awd civic shuttle, it's "b2d4wd", with intrac 4wd system. Used no plate, re drilled the flyweel on lathe, re drilled b20's block for L3 transmission, cleared some metall in intermediate shaft area for it, alternator removed to front side (created new brackets), motor mount was just overwelded from stock ZC mount, stream on pulley for powersteering was sawn-off because of rested to the spar, power steering system was removed - it's just haven't fit in ef's hood space, AC was removed too. So it all works fine in about a year already, drives really fast!) Clutch installed 200 mm, for the first time it sliped, maybe about 500 km, then it settled down probably or i dnt know what, but it started to hold on b20's torque) Soon will install 212 mm clutch, the maximum for this setup. Drived about 8000 km already on the car with this setup. Maybe you will do something like that in your future projects) Thak you for what you do! From Russia with love, Stanislav. A couple of pictures of my bucket:) prntscr.com/f46l36 prntscr.com/f46lh2

[@jronayne88]

nice to see the old into back \m/

[@strangehappenings8961]

Imagine doing that rear mount with the engine still in the car, its a serious pain but I have done it on my hatch.

[@ashleyaplin7331]

Really enjoyed the audio/backing to this one. We don't see too many shuttles in the Uk so this is a good watch

[@junjungtz2011]

The music while Seth was beating the sidewall was hilarious LOL

[@seantire]

When I did my swap those two bolts were a pain in the ass

[@GODSGUNSGLORY]

Freaking died at the part he was hammering his frames in. lol

[@TehCapri]

That's awesome you know moe, they're ship is located in Oregon. Salem to be specific, keep the vids coming man!

[@DavidYingst_505]

do you have a tech tips vid on how to lift motors in and out of the car? what points and bolts to use? it would make for a solid video if not.

[@YoungPrior]

I hope the dpfi to mpfi conversion video is very detailed and shows everything that had to be done because I'm having trouble with it :(

[@felixrodriguez6189]

PriorBuilt check out Jon widmer channel. he has a very detailed conversion. makes it look OEM.

[@josephvillarreal7374]

PriorBuilt its easy bro ive done it several time

[@sethtildeath5]

PriorBuilt it is, and we may have the solution you need. should be up tomorrow.

[@YoungPrior]

Nippon Seth thank you man I'll be sure to check that out

[@GarageBuiltHondas]

PriorBuilt Thanks Felix! And yes, I have a complete DPFI to MPFI conversion series I just finished. Even have before and after Dyno Results in the videos! Hope they help!

[@dustinmichael9751]

Was there anything special you had to do with the clutch cable? I’m having issues getting my clutch cable to reach the fork on a b20 ef sedan swap.

[@frankm2590]

nice bro, love how you dont skip the small details

[@GermanJake]

You got a tip to get my mounts to line up I can't get them to line up I've been at it for a whole day. Do I need to do anything more then just pound that side wall in?

[@blueprintgville]

Enjoying the ef love.

[@SR_KSERIES]

Thank you.

[@jonathangodinez7574]

So I need some help clearing some stuff up I’m going b18 in a 1990 civic wagon and I’m not sure if I need to change my spindles?

[@DIYdake]

yep... all my swaps go in from the bottom... way easier ! =)

[@7eduardoep]

I like the music you use in the videos now

[@danielbargas3377]

You can just buy that from harbor freight for 180 bucks

[@Jamer1kan]

Mark when you moving to FL? Especially to help Zosh with his build? Plenty of paying clients there.

[@HondaStreetGarage]

+Jamer1kan line them up I'm ready!

[@Jamer1kan]

you moving to sofla or you staying in carolina?

[@Jovind77]

its 4.20am here in Malaysia. Well fuck it

[@timkelly3863]

love the old intro...

[@Robraven83]

how much u guys charge for motor swaps?

[@euroimport531]

Hey mark, I have an 86 wagovan 4wd and I want to swap it, would I be able to use the same stuff that you use in an ef swap? Being that it is not an ef I'm not sure.

[@GHOST117HALOBOYCOD]

Euro Import I doubt it but you could probably put an early Integra d16a1 double cam in it that what you do on the first gem crx sis you'll probs have to change the fuel system also

[@cheeyang6750]

Hey there. I just recently brought an 1984 fwd. Will this method work on my 1984 wagovan too?

[@javierquiroz7464]

😂😂👍🏽 he hammer like my son his 2 🙏🏽🤣🤣😅

[@sethtildeath5]

Javier Quiroz I don't mind looking stupid to get a laugh...

[@felixrodriguez6189]

why not get a shorter alternator belt? instead of banging on the frame?

[@Wrenchlife604]

for alternator clearance. it can only pivot soo far

[@felixrodriguez6189]

Wrench life 604 I didn't indent mine. Just a shorter belt for the alternator does the trick. or you can also change the crank pulley. There is no need to make that indentation.

[@Wrenchlife604]

realy? didnt know that was doable. guess you learn something new everyday. every b series swap in a ef ive seen , everyone just hammers in the engine bay inner metal

[@felixrodriguez6189]

Wrench life 604 Yup. it's doable. I did it and my friend did it to his CRX.

[@felixrodriguez6189]

Wrench life 604 Yup. it's doable. I did it and my friend did it to his CRX.

[@jojoedanc3r]

can't wait for more Integra videos

[@big_ben_1776]

the music was really funny

[@muhamadfarid2058]

good job bro..

[@EagleEye223]

Somebody was not having a good time...

[@charlesadkins3335]

just run a smaller belt you never should beat the frame rails

[@Mr99gsrteg]

oooooooo, i hear some Volumes in the background

[@sethtildeath5]

Larry Bagley damn right! we worked in my garage this time!

[@jdmando9758]

👍

[@Salart123]

I'm bearly realizing I've never heard you cuss lol

[@TESTICULAR_MANSLAUGHTER]

Why do i never see h or f series builds on here?

[@kxlucifer]

AmongThe WickedBand. i guess they like b and k series ..h and f are good too..

[@preludedude94]

\m/ KEEP THE METAL \m/

[@toddcoleman5796]

I see an Element

[@JohnnyKoch]

Thought this channel died again

[@grhmtollison9]

fuck it I'll buy a shirt fam

[@ricedoutwhip9178]

Earliest I've ever been

[@daninturrisi8610]

1st