Efficient Power Dissipation & Cooling in EPLAN Pro Panel

  Рет қаралды 2,820

EPLAN Essentials w/ Uncle Kruno

EPLAN Essentials w/ Uncle Kruno

Күн бұрын

Пікірлер: 17
@marko_cf
@marko_cf Жыл бұрын
Just got to implement this tool, awesome feature and great video Kruno!
@eplaninanutshell
@eplaninanutshell Жыл бұрын
What's about the power dissipation of the wires?
@UncleKruno
@UncleKruno Жыл бұрын
I used to have a mentor who said the power dissipation of wires is negligible, if you follow standards you shall have enough "air" in the wire-duct, as we discussed in this video: kzbin.info/www/bejne/j3rEp2WDnsyYnqM
@Naitikshri
@Naitikshri Жыл бұрын
Can we generate calculation report ?
@eplaninanutshell
@eplaninanutshell Жыл бұрын
Yes you can 😎
@Naitikshri
@Naitikshri Жыл бұрын
@@eplaninanutshell Great
@simonezuliani
@simonezuliani Жыл бұрын
hi kruno, i would like to know how to enter the air flows, the areas reserved for the correct operation of the air conditioner and finally the optimal refrigeration area, because sometimes we use air conditioners that are not present in the data portal.
@UncleKruno
@UncleKruno Жыл бұрын
Hello Simone. Thank you for your question. The enhanced functionality of thermal design integration ( Optimally air conditioned area, air flow arrows and reserved areas) are exclusively available for RITTAL components from the Data Portal. There is unfortunately not a possibility to add this information manually on other parts. Best Regards Kruno
@farhadkhorasani4625
@farhadkhorasani4625 11 ай бұрын
That is fantastic, Kruno can you tell me, how to active the power dissipation item on the top ribbon because when I click on it the parts colour have not changed like your parts on mounting panel then when go to instance part ABB part what you showed and typed power then power dissipation came up, for me nothing is coming up. Maybe needs to go to setting. I do appreciate it if you kindly give me hints
@UncleKruno
@UncleKruno 8 ай бұрын
Hello Farhad. If you use the power dissipation functionality and the color does not change its most likely one of two things: 1) Missing Project Settings (Frequency, Sim Factor and Voltage needs to filled out) 2) Missing Part Properties ( Max. power dissipation needs to be filled out) Hope this helps Best Regards Kruno
@MikeFixesStuff
@MikeFixesStuff Жыл бұрын
Is there a way to enter a different voltage (i.e. Thermal design: Voltage ) not on the list? The highest is 460V, but what about non-US countries using 575 aka 600V? is there a solution pending or workaround available for now?
@UncleKruno
@UncleKruno Жыл бұрын
Hello Sir. Thank you for this question. As for now it does not look like you can select for the calculation any other than the predefined values. If you are missing values, please contact your support team, they will ultimately guide you to a software wish form. Feedbacks like yours are essential for the continuous improvement of our software. Best Regards Kruno
@MikeFixesStuff
@MikeFixesStuff Жыл бұрын
@@UncleKruno I found out this has nothing to do with the calculation but more to do with the Rittal equipment selection (and its operating voltage).
@Gitarmafia
@Gitarmafia Жыл бұрын
Hi Uncle Kruno I'm Struggeling a bit with the Power Dissipation Calculation feature you show here: I have defined Air-condition field to be: 2 And added all needed values according to your video But still when i try to use the calculation function, the Air-conditioning field does not show in the message box. I have imported and created this cabinet myself from scratch, maybe something is missing? I see that it works with a standard Rittal cabinet from Eplan Data Portal. Any tips?
@JoaoGualterMachadoRigor
@JoaoGualterMachadoRigor Жыл бұрын
Hi Kruno, can you make a full tutorial from the scratch? Example a DOL Starter in 3D model. Showing the assignment of the eletrical componets with symbols of the eletrical schematic. Exhibiting the basics fundamentals and work principles for beginners.
@UncleKruno
@UncleKruno Жыл бұрын
Thank you for your request Joao. I am working on a concept for a series of videos for beginners. It will take some time to finish them though. Appreciate your support.
@JoaoGualterMachadoRigor
@JoaoGualterMachadoRigor Жыл бұрын
@@UncleKruno i will wait for them 😉
EPLAN Pro Panel 3D High Definition Enclosure Version 2024 | FULL TUTORIAL
11:30
EPLAN Essentials w/ Uncle Kruno
Рет қаралды 3,7 М.
EPLAN Pro Panel 3D Macro Version 2023 | FULL TUTORIAL
12:38
EPLAN Essentials w/ Uncle Kruno
Рет қаралды 18 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
RiTherm Calculation Step by Step
16:17
RittalLtdUK
Рет қаралды 1,1 М.
Mastering Drilling Patterns in EPLAN: A Step-by-Step Guide
9:21
EPLAN Essentials w/ Uncle Kruno
Рет қаралды 3,4 М.
Efficient Auxiliary Component Placement in EPLAN Pro Panel
7:24
EPLAN Essentials w/ Uncle Kruno
Рет қаралды 3,2 М.
EPLAN Pro Panel Export to Steinhauer final
4:20
Sergio Brinckhaus
Рет қаралды 6 М.
EPLAN   Seamles Data Flow for Controls Design
21:21
SeanM233
Рет қаралды 6 М.
How to Calculate Total Wire Consumption in EPLAN
13:04
EPLAN Essentials w/ Uncle Kruno
Рет қаралды 2,2 М.
3D Disconnect switch how to in EPLAN Pro Panel
9:31
Sergio Brinckhaus
Рет қаралды 24 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН