Straight to the point. No stupid music, no stupid 3 seconds pausing and stupid jokes. Very professional
@FXSTB-i10 күн бұрын
Best 'how to' for grips on KZbin by a country mile. Proper professional advice without the cackhandedness. Thank you from a Harley owner in Scotland .
@soulquesting7 жыл бұрын
This is by far the most informative and precise, not to mention helpful, tutorial video for motorcycle DIY. Thank you so much for this. Finally something useful.
@knockoutartist1015 жыл бұрын
I agree with you 110%
@chrisrosales65442 жыл бұрын
Except for he didn't say what to lubricate grip with? WD40? Alcohol? Spit? Sorry I'm new.
@laytonvires29537 жыл бұрын
this is the most efficient and quick way to do this out of most of them on you tube
@sniperwolf8835 жыл бұрын
I just bought a set of Avon grips on eBay, this by far is the most informant video I have seen.
@oldasdihrt5993 Жыл бұрын
I watched another video prior to watching this one and the first one scared the heck out of me when it came to the cables. I'm so glad that i watched yours because if i hadn't, i never would have attempted to do it myself . Easily the best video on this subject. Thanks
@capri68228 жыл бұрын
Just switched out my stock grips with some Avon grips with this video. Very detailed and step by step instructional video. Thanks!!!
@xdragon38622 жыл бұрын
2 minutes and 17 seconds in ... I finally understand. Thank you!
@martinnormanton27304 жыл бұрын
Excellent no nonsense instructions, top guy 👍🏼
@ballstud20074 жыл бұрын
Great video. I should have watched this before I put my new Avon grips. I could have left my mirror perches on. But the Avon grips go on about 1/4" farther than the factory grips. So I had to move them up any way. Thank you for the great video. And this video shows how to correctly put the ferrules back on the throttle tube.
@gabrialavichai96154 жыл бұрын
Really appreciate this. Best I've sen, especially on the wires and taking them out and placing them back in up close on the throttle side....Thanks!
@zozoa16 жыл бұрын
Straight to the point great video
@craigwoodman99203 жыл бұрын
Great video!! Awesome thank you
@MotoBeardLA Жыл бұрын
best video on the internet
@PanamaSticks Жыл бұрын
Nice tutorial. Thanks.
@wingman1255 Жыл бұрын
You knocked it out of the ball park. Meat and taters, no bullshit. Job done!
@EarlGuyton4257 жыл бұрын
Your video was better than three other popular videos I watched. Based on my 02 softail I did assume I would not need to remove the master cylinder and brake lever. I also found a way to replace the throttle cables at the carburetor throttle without removing the fuel tank and only removing the air cleaner cover
@DDSP21Ай бұрын
You rock thanks for the video
@activefitgym5 жыл бұрын
Super helpful! Thank you!
@patrickrobinson-mh5jw6 жыл бұрын
straight forward and easy to follow thanks
@mitchmellington51238 жыл бұрын
thank you studio much. I was having a time getting my throttle grip back on. I didn't know you could loosen the cable. thanks a lot.
@curtisdavis99015 жыл бұрын
Same here!!
@Roadking-ze9tn4 жыл бұрын
Thank you
@muiltirelojero2 жыл бұрын
Thanks for the video. Could you recommend the best glue to use please. Thanks
@johnnyfuller38998 жыл бұрын
Definitely helpful.
@donmontalvo17 жыл бұрын
Other videos have us removing the air filter housing, to expose the throttle body, to ensure throttle up opens fully, and throttle down closes fully. Curious if there is any risk in not doing that?
@johnlopez36416 жыл бұрын
Thanks for an awesome video, do you have any for Night Rod Specials?
@chrisrosales65442 жыл бұрын
What do you use for lubricant
@TheYulick2 жыл бұрын
Muito obrigado pela dica!
@breeze456 жыл бұрын
Well done great no-nonense vid.
@Freechapter Жыл бұрын
Super ! Perfekt !
@edscorsese Жыл бұрын
I have a lot of play going outward. How can I fix that?
@jdreese37 жыл бұрын
i love your vidos.
@christinec.23765 жыл бұрын
thank you so much for your help; this should aleviate some of the shock of an estimate I got for repairs,.. and I have all the parts! :/ I'll take this chore off his plate.
@PanamaSticks Жыл бұрын
What kind of lubricant?
@kadenwood196 жыл бұрын
Does this change at all if I have a throttle lock?
@PerkulatorTime7 жыл бұрын
what if my throttle grip slightly goes back the other way? is that ok? throttle feels good otherwise
@hollynites4457 жыл бұрын
Is the grip size the same on a 1200 and a Road King?
@hollyculver35397 жыл бұрын
what type of glue do you use
@R3RLEE5 жыл бұрын
You dont need glue, just use washing up liquid to slide on the new grip once it dries it wont go anywhere.
@jasonlimakegiddings23484 жыл бұрын
What tools are used exactly?
@ericnuernberg3901 Жыл бұрын
👍💪
@ErnieSesameStreet8 жыл бұрын
at video timing 3:23, the ferrules opening face in or out. Some people face in, some face out, any difference?
@ronnorris78216 жыл бұрын
NOPE
@tomfoley8794 жыл бұрын
What about the brake light switch
@Zfusion9118 жыл бұрын
what if i just want to change bars and keep my grips, how do i take the left one off
@AKHAT38 жыл бұрын
+TwoWheel_Fox Try wd-40 or compressed air, those 2 methods seem to work well.
@sterlingcollins30775 жыл бұрын
You don't need to take off the brass ferrals
@ChainsawKLOBYK4 жыл бұрын
Cut the grip, but I want to reuse my left grip not cut it, no help , sad face!
@metalshopartslab19064 жыл бұрын
you spent all your time on the throttle grip and didn't show any of the left hand grip. Didn't show the glue part, didn't give any examples of grips that you couldn't cut off. So basically you showed the easy part.
@patrickt65722 жыл бұрын
What kind of dumbass needs a tutorial for the left grip lmao
@showcasecharlie114 жыл бұрын
All you messed with was cables...there was no replacement...
@vstar71967 ай бұрын
The thing about Harleys is, you remove one screw and other things fall off later. Buy a real motorcycle.