Einhell 2.5Ah Battery upgrade using LiitoKala 21700 5000mAh LiIon Cells

[@DjaniAgain]

Great resque of a power tool! 👌 New life, with more than twice battery capacity ✌️

[@ErCanEverything]

5Ah in a small compact battery and weighs only 500g

[@yaminsiddiqui4690]

litokala are known for their dissapointing current capabilites.

[@na3imyakhelef553]

صباح الخير . لقد جعلت البلاستيك مثل الخشب . أنت حقا بارع . أنت فنان كبير.

[@FixitEasyDIY]

Nice upgrade 😮

[@ErCanEverything]

In this way, the capacity is doubled and weighs only 500g

[@rogeriodiasdossantos6213]

Top 👍🏽🔋🔋🔋🔋⚡⚡⚡⚡🔌

[@Kurtdereli81]

If the prices are the same, would it make sense to buy the einhell 4.0 ah battery produced a few years ago or the newly produced 3.0 ah PLUS battery?

[@SpartaHub-sb8kp]

They have 15A, is that enough? Isn't it better so use stronger Ampere batteries, like 30 or 35 Ampere? Thx

[@fr_z_n3727]

use 30+ if the battery is going to go on a circular saw or other high amp draw requirement tool.

[@Tom-xi6gj]

Some 21700 cells with enough CDR: 40T, VTC6A, F40, LT42A, T39, P45B, 50E And if money is no problem get the T42 from Vapcell. It's 35A CDR 50A Max at 4200mah Second best is P45B Vapcell at 45A Max 4500mah And the best for your money is a LiitoKala Lii-50E at 5000mah and 10-15A CDR (the ones used in the video)

[@ErCanEverything]

Yes, they are a bit weak for this purpose.

[@deskmat9874]

Thank you for this my charger told me something is bad with the battery and a new one is quite expensive so I might try this

[@antoniosestar3671]

Expensive? New battery 2.5Ah with charger is 20 euro in my country

[@nelchan2421]

my friend can i use this battery to my ozito 18v drill?

[@ErCanEverything]

This is the first time I've heard of the ozito brand, but as I see they are the same and I think you can use them but I'm not completely sure.

[@josephking6515]

Yes. Ozito is owned by Einhell and are made in the same Chinese factory. Tools and batteries are exactly the same and so are compatible.

[@fr_z_n3727]

Do you know about building 2P5S or 3P5S 21700 batteries? There are packs out there but I'm unsure of the rated amperage and whether you could put a 45amp P45B into 3 parallels without it overheating?

[@M99pt]

I do it 2 pcs of 2.5 ah einhell battery in paralel with only 1 pcb Problem is current delivery is only 720w because 2.5 ah pcb is limited to that That's way i buy 5.2ah battery with 1320w delivery

[@wilhelmstanzl3635]

Many thanks for this video!

[@사랑스런몽]

좋은정보 감사합니다

[@AntonioOliveira-xj5om]

Good! Excellent videos!... I need your help if possible. I have a 20v DC battery-powered angle grinder with brush motor from Einhell, mod: TE-AG 18/115 LI, which burned the controller and the price of the controller is almost as expensive as the machine. I connected the angle grinder directly to the battery without the controller, but when starting it disconnects the battery to protect it. I think it's due to the very high voltage peak at start-up. I thought of putting a thin wire on the positive connection from the battery to the engine and it worked, only then, with the angle grinder working, did the said thin wire heat up and melt. I would like to know if you have any solution for building a type of for example “soft starter” for 20v. Thank you very much in advance. Hug!

[@ErCanEverything]

Thank you my Friend🙏🙂🤝 It's not safe with a thin cable but I'll come up with some simple circuit with a mosfet transistor for a soft start.

[@AntonioOliveira-xj5om]

That would be great buddy!!! I'm glad there's someone who understands the difficulties of others and who we can turn to... I'm waiting. Thank you very much and good luck! hug!@@ErCanEverything

[@alimughal7258]

Hey brother it's me I don't think you remember me but I used your resistor bypass technique for my Parkside pdssa20 impact wrench it didn't work Can you tell me how do I do this the same with Milwaukee hammer drill m18 I don't have it's charger and it's a old one so before buying the battery I want to make sure it works ie it's inner circuit is ok)

[@ozmobozo]

I wouldn't trust the numbers on the new cells. It is most likely the same as before, hopefully not worse.

[@ahmedothman798]

Hello I have a question about parkside tools if you can help me

[@M99pt]

Ask questuion

[@yerbudak]

mükemmel

[@ErCanEverything]

Teşekkür ederim Dostum🙂🤝🤝🤝

[@nursaitaksu-yt1nr]

👍👍👍😊👍

[@zindan2698]

👀👀👀👀👀👍👍👍👍👍👍👍👍

[@na3imyakhelef553]

👍 .

[@mestrenoob9770]

Impressionante.. tenho um carregador que ele carrega a bateria, mas logo ele mostra em 100% mas quando vou usar não está carregado. Ae coloco pra carregar carrega uns 10 segundos mas já mostra 100% de novo

[@tech-lithium7146]

Provavelmente tem um S com problemas amigo, uma célula por exemplo

[@LalaniKumari-px8fl]

25 amps .. title