Learn how to easily install an electric fence with our step-by-step guide. Keep your property secure and animals safe with this simple DIY solution. #ElectricFence #DIY #HomeSecurity
Пікірлер: 60
@azukaegougo680721 күн бұрын
Thank you very much sir, am greatful for this lecture, God bless you sir
@defotechtv909321 күн бұрын
Thank you so much for reaching out, where are you watching from?
@Henry_fred20 күн бұрын
Yes. Do the gate automation
@defotechtv909320 күн бұрын
For gate automation, I am the gate master. I automate gates.
@user-qw7ef2ch2b6 ай бұрын
Thank you sir for the class.
@defotechtv90936 ай бұрын
You are welcome.
@user-sd3ht8gr6b8 ай бұрын
Thank you sir the earthing is very clear to me now .
@defotechtv90938 ай бұрын
I am happy to hear this.
@user-hb6go5ut1n8 ай бұрын
Thank you for the information. When adding the earthing, is it just the copper earth rod buried in the ground or do you add the salt charcoal etc mix.
@defotechtv90938 ай бұрын
But just the copper rods alone, that is fine for your fence to function effectively.
@simonchiti12279 ай бұрын
Thanks for sharing, great insight. 👍
@defotechtv90939 ай бұрын
You are welcomed sir
@Ebiz-yt9tr9 ай бұрын
Thank you very much sir, you're a rare gem. God lift you always.
@donmaestro68613 ай бұрын
This proved to be really helpful, can you please do a video of how to test the level of shock or volt on the fence
@defotechtv90933 ай бұрын
Use a fence scope to carry out that test.
@olanrewajuqaasim40398 күн бұрын
Sir, i implemented this on a fence wire,but the siren is not coming up each time i bridge the line. Pls sir what can be the problem.
@defotechtv90938 күн бұрын
It wasn't well executed, I can assure you of that. Chat me up on 08064869987. Thanks
@augustusmshila97196 ай бұрын
tech from kenya.thanks for your classes.
@defotechtv90936 ай бұрын
Glad you like them!
@alexwilson91739 ай бұрын
❤
@Ebiz-yt9tr9 ай бұрын
Sir so in a situation where there's an inverted polarity, we are to loop the live in and live out terminals under the Energizer the remove the loop in on the earth in and out. Then connecting two wires in the earth in and out respectively then connecting those same wires to the two broken points on line 6 when contounting from the top of the rack. then connecting a wire from the already looped earth to the line 5 of the fence which is linked to line 2 and marked earth. Am I correct?
@defotechtv90939 ай бұрын
Simply remove the jumper on the earth terminal under the Energiser and place it on the live terminal, then connect accordingly, replacing live as earth and earth as live.
@AckimBanda-bq3juАй бұрын
🎉how do I connect the siren and strobe light on the wizard 4
@defotechtv9093Ай бұрын
Yeah good morning thank you for reaching out , the left side of the terminal block where you have like six terminals if you pull out that block, you will see it there
@Yeshuaschosen8 ай бұрын
I installed an electric fence in my yard but the soil is rocky , sandy and dry.So far I've increased the ground field to improve the strength of the shock but still have a problem .Making some changes after watching this video and think I've solved my problem. Thanks!
@defotechtv90938 ай бұрын
Thanks so much for your kind words.
@naphtalydanielzulu52477 ай бұрын
😊
@abdulrahmanmuhammad62058 ай бұрын
Good day sir, please how can i do the earthing? Do i just buy the rod and nail it in the ground and then connect to the energizer?
@defotechtv90938 ай бұрын
Yes sir. Exactly.
@LouisBaafi3 ай бұрын
Thanks to U sir😂😢😢😮😅😊😊😊😊
@defotechtv9093Ай бұрын
Thanks
@aiengineering20233 ай бұрын
Hello , Appreciated your video, which is the best wat to install ? in series ? for 8 wires ? - thanks to advise Sir.
@defotechtv90933 ай бұрын
Series is recommended for security, moreso 8 lines is longer than 6 lines, there 8 lines have a better anti-climb.
@aiengineering20233 ай бұрын
@@defotechtv9093 So for the Live and Earth for 8 lines is : LL E LL E LL or it can be LL EL EL EL please advise Sir.
@defotechtv90933 ай бұрын
@@aiengineering2023 LLELLELL
@goodluckayetuoma39568 ай бұрын
You are doing well sir. The gate automation will be better on practical not manually
@defotechtv90938 ай бұрын
But it's expensive, that's why I haven't started. I need over 800k to set that up, because I need a demo gate too.
@candidusachonwa21795 ай бұрын
What about 8 lines
@defotechtv90935 ай бұрын
8 lines as in what sir? Please throw more light
@GAF86739 ай бұрын
Interested in your automation
@defotechtv90939 ай бұрын
Please send ma a DM via my WhatsApp line also
@andrewodokel8796Ай бұрын
When does it show 'gate' on the key pad display
@defotechtv9093Ай бұрын
Do you mean, why does your keypad display "gate lamp" on the keypad?
@defotechtv9093Ай бұрын
Do you mean, why does your keypad display "gate lamp" on the keypad?
@andrewodokel8796Ай бұрын
@@defotechtv9093 it blinks 'gate'
@defotechtv9093Ай бұрын
The programmable switch on the energizer panel is opened.
@andrewodokel8796Ай бұрын
Thanks,,my client has called me that his energiser socket power goes off when the battery is connected and power comes back when the battery is disconnected
@user-sd3ht8gr6b8 ай бұрын
Sir is this applicable to 8 lines
@defotechtv90938 ай бұрын
What are you asking about sir? Earthing is for both 6 and 8 lines but the position earth falls on both is the only difference. On 6 lines it is 2 and 5, why on 8 lines it's on 3 and 5.
@victorthom-otuya-hj8bs7 ай бұрын
Your earth didn't go round?
@defotechtv9093Ай бұрын
It's just a sample
@victorthom-otuya-hj8bs7 ай бұрын
U don't close your earth
@defotechtv90937 ай бұрын
😂😂😂. You know it ought to be linked. But our area of concentration is the live n the gate contact connection
@chimezieprecious41909 ай бұрын
Defotech TV Sir please my machine don't switch on with battery else there is power supply. Once the take the light it goes off. I have changed the sensor, I bought a new battery 🔋 it is still doing the same thing. Please wat could be the problem I need to fix it. These workers are just collecting money and doing nothing