If you run into this problem.... open up the pendant and remove the up down switches. Remove the two screws that hold the switch together and split the switch into two halves. You will see the contactor tips. Remove the terminals and the contactors will be accessible so you can file them and clean them. The motor won't start because of the way these dumbasses wired the capacitor through the contactors (dumb idea). Anyway if the contactors are fouled then the capacitor can't start the motor.
@kasperzgordon72009 ай бұрын
Thank you for your information bro it really works ❤ 💪 I done with your information ❤❤❤❤❤
@arnaldohaltenhof4916 Жыл бұрын
Good afternoon, could you tell me what capacitor I need for a 1300 pound, 110 V winch like the one shown in the video, I bought it at Harbor Freight 2 years ago, I took it to South America but it never works, it just sounds trac trac and a hum. Thank you
@PHUSHEY Жыл бұрын
Isn't South America 220v? I know Chile is.
@PetshopPete2 жыл бұрын
So what’s the solution ? .. can’t leave a video like that…without finding the fault
@ahmedmohd15122 жыл бұрын
The switch has two lines, neutral and line This problem is because one of the lines is not connected I had the same problem and solved it
@yaszrenterprise Жыл бұрын
@@ahmedmohd1512 bos
@Poop1212344 жыл бұрын
Ever got this fixed. Mines isn't going up...only down
@Per4094 жыл бұрын
same here lol, looking for the problem EDIT: mine was an easy fix, flip the auto stop a couple of times, worked fine then
@johnkosick14642 жыл бұрын
@@Per409 Yes........ I just bought this unit and it does the same thing! It would go Down, but not UP. I hit the "Auto Stop" lever then it worked. I haven't fooled with it yet, but it seems the problem may be in the " Auto Stop" mechanism! Just a thought.
@Per4092 жыл бұрын
@@johnkosick1464 Had mine 3 maybe 4 years it's still doing fine, i know one thing, i couldn't do without one of these now, they're great for lifting the front/back of riding mowers.
@ikstrucking3289 Жыл бұрын
When your hoist goes down, but not up, check the autostop metal square loop, through which the cable goes. It can be misaligned, and the cable rubbing on it too much. When hoist cable goes down, it will not create a problem, as it rubs and pushes down on the autostop's square metal loop. As long as the autostop is pushed down it creates no problem. But when the cable travels up, it rubs on the autostop square metal loop, and drags it up. Autostop square metal loop being brought up by cable just half inch is enough for the hoist to stop working. When cable goes up, your hoist autostop square metal loop through which cable travels, must not go up at all, then the hoist will keep hoisting. Align the autostop's metal loop and all should be good. I heard, that sometimes technicians would replace the autostop spring to a bit stronger one, that also helps against cable not pulling autostop up uneededly
@ooFalcon786oo5 ай бұрын
@@ikstrucking3289THANK YOU!!! That did the trick!
@ahmedmohd15122 жыл бұрын
How to solve ? I am facing the same problem
@prasadarao3872Ай бұрын
New piece load not lift empty up and down working ok reason
@PetshopPete Жыл бұрын
So what’s the solution ?
@damindanalinadhikaram55237 ай бұрын
Capacitor value please
@daddydawg19024 жыл бұрын
Ok.. you did a video of your Hoist not working? No indication of WHY or How/IF you repaired? Really?
@rhino00454 жыл бұрын
To show the seller their product didn't work. I got a refund. Thanks.
@habibullamdori5273 жыл бұрын
Yes same problem...
@akimineesan4292 Жыл бұрын
Laying upside down will not work
@habibullamdori5273 жыл бұрын
Trese Capacitor connection wair in motor connection box or controller stick in my machine capacitor wire disconnected in controller stick.. I soul this problem...
@aaranyamthenaturalcosmetic38153 жыл бұрын
I am facing the same problem, any one has a solution,?? It's new machine osed once only
@ahmedmohd15122 жыл бұрын
The switch has two lines, neutral and line This problem is because one of the lines is not connected I had the same problem and solved it
@mohammedilyasdori37463 жыл бұрын
In up down prblm change joy stick cable or connections
@aaranyamthenaturalcosmetic38153 жыл бұрын
Fail to understand
@spsitsjstores394 жыл бұрын
please chack cable canection
@WaqasAli-nl7kz2 жыл бұрын
Please mention problem
@ahmedmohd15122 жыл бұрын
The switch has two lines, neutral and line This problem is because one of the lines is not connected I had the same problem and solved it
@mohammedilyasdori37463 жыл бұрын
Check capacitor or it's conectedall circuit wair
@aaranyamthenaturalcosmetic38153 жыл бұрын
Are you a mechanical engineer ???
@karnatakakooling81553 жыл бұрын
How to solve this problem
@habibullamdori5273 жыл бұрын
Yes same problem...
@aaranyamthenaturalcosmetic38153 жыл бұрын
I am facing the same problem, any one has a solution,?? It's new machine osed once only
@massalhaShady3 жыл бұрын
Its the Capacitor, watch this video to learn why: kzbin.info/www/bejne/qZK5qpdvfq-fp68