Electric Vehicle 3: MATLAB Simulation of Regenerative Braking By Dr Rajin M. Linus (Part-I)

[@signature445]

He is such a great prof i had ever met he will give full support when we contacted him .

[@eeknowledge1732]

Thank you dear 🙏🙏. Happy to hear if you feel good about my discussion. 🙏🙏

[@user-hq9lt4os4s]

How to contact them please tell

[@abnerojeda4620]

A great explanation! Very helpful. Thanks for the lecture.

[@eeknowledge1732]

Thank you 🙏🙏

[@omkarkudalkar4621]

thank you sir very informative only little bit video quality is low facing problem while recognizing Simulink blocks in model . Overall good content keep going with your quality working in upcoming year. wishing you Happy new Year 2022

[@eeknowledge1732]

Thank you for your encouragement sir. Wish you a happy new year. I will try to rectify the issue of quality in forthcoming videos. Thank you for your valuable comment as well

[@mohan1386]

@@eeknowledge1732 Hi sir, good morning, I'm B. Tech final year student .I want to talk with you sir regarding regenerative braking in hybrid vehicles

[@sankhamitra3862]

Sir, can you please suggest the theoretical reference material or books if available for studying this concept of braking??

[@eeknowledge1732]

I don’t have idea. I prepared by my own

[@lorenzocolturato6361]

Sorry, what is the block between the diode and the battery? And what is also the last block at the right just after the voltage measurement block? Thank you but from the video i do not understand well

[@eeknowledge1732]

Thank you for the comment. The block between the diode and battery is current measurement. The block just after the voltage measurement is display.

[@ravindare6248]

Hello sir, Thank you so much

[@eeknowledge1732]

Welcome sir 🙏🙏

[@sivapraveen5880]

Hello sir, please tell what is the element is connected between bus and the scope at the bottom of the model which is named as x bar

[@eeknowledge1732]

Thank you for the comment. It is mean block

[@koushisn2599]

What are the components required to make regenerative breaking

[@eeknowledge1732]

Thank you for the meaaage. Bidirectional converter is required

[@dineshdas9983]

How to take n p block from library also what block is used to energize the field in dc machine (which looks like a cell ) Thank you in advance

[@eeknowledge1732]

PWM generator . Normal DC source is used for field excitation

[@saikatmukherjee2548]

Sir what is that block which has DP written over it and it is between mosfet & step signal generator?

[@eeknowledge1732]

Search PWM Generator or pulse generator

[@bhavasomasundaram209]

sir,useful lecture, thank you. with this simulink circuit how to connect vehicle body .(vehicle body is in simscape).

[@eeknowledge1732]

Thank you sir

[@akkip7437]

can you tell which motor block you have used in this?

[@eeknowledge1732]

Thank You for your comment. Separately Excited DC Motor Model is available

[@harshareddy4612]

Respected sir, I have a doubt regarding boost converter in this circuit,kindly clarify this. The boost convertor should increase the voltage, but in this circuit, output voltage is less than the battery voltage (240). Kindly help me by giving reply sir.

[@mohitgarg4429]

Sir I am not getting this block which is connected between step function and drain of mosfet

[@eeknowledge1732]

Thank you for your comment. It Pulse Width Modulation generation

[@nerellabhargav8041]

sir can we do regenerative braking in induction motor if we can how we can do it sir please explain.

[@mownikag1997]

Hello sir, Can you pls make simulation on regenerative braking of Switched Reluctance Motor.

[@eeknowledge1732]

Thank you sir for your comment. I can do. But it will take some time 🙏🙏

[@ciceroestibeiro7830]

Sir im unable to get the proper waveforms in the scope . Kindly help me. Ps: I've also emailed you regarding this issue but you still havent responded

[@eeknowledge1732]

Dear Sir, Thank you for your comment. I have seen your mail. Instead of sending matlab files to simulate and check it from my end, you send me the waveforms clearly and details of your expectation and variation in output. So that i can clearly understand. Based on the usage of different matlab version it is difficult manage with every one file. I hope you understand the issue. Similarly from your end you analyze at your level best before. Then only you can learn more. Thank you

[@shanalakshmiprasad11]

How to calculate the regenerative braking energy sir? from this please explain to me, sir.

[@akkip7437]

can you provide .slx file so we can try it our own..The whole network isnt understanding in video.

[@eeknowledge1732]

No dear sir. Please try to do by your own. If you have doubt ask me

[@sds2908]

Sir why we are taking -ve load torque here??

[@eeknowledge1732]

Thank you for the comment. In matlab DC machine modelled such a way that positive input torque for motoring behavior and negative input for generating behaviour. Thank you 🙏🙏

[@Albatrozfan]

Sir how can we calculate the regenerative braking power from a simulink model

[@eeknowledge1732]

It will be the generator voltage and current. Thank you for your comment🙏🙏t

[@karthikeyanraj8813]

could you please share the simulation slx file for regenerative braking

[@venkatchinna6114]

hi sir how to design the regenerative braking system in switched reluctance motor drive for electrical vehicle applications using matlab

[@eeknowledge1732]

Thank you for your comment. First you complete the speed control of the motor. Then analyze the performance during the generating mode. Accordingly, do the control

[@mohamedasarudeen3996]

Hi sir, do you have an energy calculation for regenerative braking system

[@eeknowledge1732]

Thank you for your comment. I don't have but we can calculate

[@misrayelu143]

Dear Sir, can you upload one video on pmsg mppt concept with simulation?....

[@eeknowledge1732]

Ok. But I need some time sir. I will 👍👍Thank you 🙏🙏

[@misrayelu143]

@@eeknowledge1732 Thank you so much sir.

[@arunshankar7203]

Sir I have a problem in simulating. Battery SOC is not increasing but it remains constant. What am I missing. Thanks in advance sir

[@eeknowledge1732]

I think you have chosen Ah rating more than the rated power and time period of energy

[@santhoshsk5511]

How can i contact you.? Sir

[@eeknowledge1732]

Thank you for the message. In the channel page WhatsApp group is there. Thank you 🙏

[@mohitgarg4429]

What is this block called as ??

[@eeknowledge1732]

I could not understand which block you are asking

[@gouravsharma6609]

sir plz suggest me a project on matlab for my degree

[@eeknowledge1732]

Thank you for your comment. Go through recent literature and understand current trends. I can help you

[@gajanangathawar5527]

sir output voltage formula Vo=Vs/(1-d)

[@eeknowledge1732]

Yes

[@user-hq9lt4os4s]

Sir i need help regarding simulation of regenerative braking on bldc motor using dc dc boost converter please contact me sir.

[@sunghopark5155]

hi sir, can you share to me your matlab model for regenerative braking?

[@eeknowledge1732]

It will be good if you do it by your own. So that you can learn. For your any doubts, I will help you. Please join this group if you are interested chat.whatsapp.com/BACus7HV4wA0xzasiqhkjl

[@林裕哲-o7z]

hi sir, can you share to me your matlab model file for regenerative braking?

[@eeknowledge1732]

Hai dear thank you for the comment. Please do it your own. Then only you can Learn. I can help you. Thank you

[@amityashwantrao3300]

Hello Sir, Thank you so much for sharing such amazing content. It really helped me. I am MS in Robotics and Autonomous Systems student at Arizona State University and currently performing a thesis on Autonomous-Vehicles. It would be great to connect with you on LinkedIn.

[@eeknowledge1732]

Thank you dear Yashwantrao Amit Sir for your Compliment. I extend my help to you at any time. I am happy to hear that my content helped you for your development. Thank you 🙏🙏

[@loganjerry1745]

Sir can you share the simulation file.

[@eeknowledge1732]

Please try from your end for improvement dear. Thank you for the comment 🙏

[@swatiraj9866]

sir please share the matlab file

[@angusthy]

hello sir will u reply email?

[@eeknowledge1732]

I will. Sorry for the delay dear. If I have not replied till Saturday, please remind me through mail. This week I have been little bit busy

[@angusthy]

okay thanks u so much😎

[@eeknowledge1732]

@@angusthy sir i hope you have received my mail

[@luck5684]

@@eeknowledge1732 sir could you please share the slx file for this experiment.

[@eeknowledge1732]

Hai dear thank you for the comment. Please do it your own. Then only you can Learn. I can help you. Thank you