Electrician Told us to F**K OFF!

Use code BUNDY25 at unilite.co.uk/product-categor... for 25% off
Use code BUNDY10 at www.expertelectrical.co.uk for 10% discount
Join this channel to get access to perks:
/ @nbundyelectrical
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.

[@ashleybignell2366]

Good Work Adam, nice to see you planning your work out. An eye for detail creates a quality job.

[@AMStationEngineer]

At 18:35, had most of my fellow HVACR techs, here, on the opposite side of the pond, been presented with that opportunity, the "rubber band, with jumbo paper clip" would have been deployed, with the accuracy of a crossbow and sniper! I love watching these U.K. electricians videos, seeing one where you don't have to straighten out someone else's "horrendous job", is quite rewarding! Nick, and Adam do some of the neatest work I've seen; those who've trained each of you, did the training right! Stay safe, stay healthy, and have the greatest 2022, the both of you!!

[@bartman58]

I don't think you actually get taught to do things neat....I have a load of evidence😂 I always think that the person who follows me thanks me for doing a neat job....I always label everything because I have a bad memory and it could be me going back😂 it's good to do a neat job and really doesn't take much longer👍

[@cliveramsbotty6077]

personally i'd have gone for a nice strong jet of coil cleaner sprayed directly at the arse

[@pwaelectricalltd29]

Adam’s made a lovely job of dressing the cores in the XL, and just the perfect size for the receiver. 👏

[@richrowley8355]

Good work Adam. Much more confident in front of the camera, and good skills, Keep it up........ Good work Nick. Adam having the passion for quality work, reinforced by you. Great vid

[@johngoard8272]

Yes Nick perhaps the other sparky was getting some grief at home LOL!! Like the job you and Adam did and am impressed how professional the young bloke was and your work in general.

[@JayTheSparky]

Adam in the loft near the end reminds me of being an apprentice and having to negotiate a similar loft space but about half the height & having to climb over heating pipes at the same time 🤦🏻‍♂️😂😂😂 Nice neat job by Adam, seen time served sparks not be as neat as that 👌🏻

[@NBundyElectrical]

Thanks jay 🙌

[@Arachnoid_of_the_underverse]

Nice neat job with the consumer unit and the loft wiring .Im just wondering if placing the wago box in a more convenient place might help if in the future other wireless switches were to be installed and require programming.

[@cgoad]

Hi Nick and Adam. That was a treat. And a teaser....more Adam channel videos? Oh yes please. Nice job guys.

[@TurboTimsWorld]

Great Video Adam, I don't know why you let Nick loose with the camera ! LOL

[@ttatimbo5830]

That message is the lyrics to an old song by ‘Extreme’ called ‘get the funk out’, maybe a jokey connection? Good vid chaps! Happy new year!

[@J_B_electrical]

I'm glad these awesome vids are comeing out again

[@NBundyElectrical]

Thanks dude

[@thebeerbaronsgaming4488]

From the title I was totally expecting it to be David Savery shouting at you😂

[@mikeenglish1492]

Good vid Adam, Nick needs to get you a new racked out van

[@Realm-of-Horror]

I think the message in the fuse box was also a reference to a rock song from the 90s, "Get the funk out" by Extreme (look it up on KZbin and listen to the chorus).

[@oingpla]

Just Subscribed! You guys are genuinely top blokes, Adam's going to go a long way with you as his master! Keep the Vids coming!

[@NBundyElectrical]

Thanks matty 🙌

[@percygsi]

Im a person who switches all the plugs off at night, thought about using the Quinetic stuff but i dont like the idea of things with power on, after ive switched off.

[@johnibbertson2960]

that was good work .and interesting because i never fitted that sort of two way in my day it was a pair of strappers and switch wire, technology eh

[@NBundyElectrical]

Making our lives easier but more expensive mate

[@ForTheBirbs]

Adam - how good are you! Nick is justifiably proud of your attitude and workmanship. Great video guys.

[@NBundyElectrical]

Thanks Jim 🙌🙌

[@fatpedro5588]

Question regarding the quinetic switches. Given that the receiver is in the loft, if there is a power cut to the address, do the switches automatically reconnect or do they need to be paired up again?

[@artisanelectrics]

David Savery’s last customer 😆

[@_tmmy_]

And now we can see why he hates doing board changes.

[@dsesuk]

I pissed in their fruit bowl an' all.

[@Malandrin]

nice message frfom the former sparky that installed that DB 🤣🤣🤣

[@jkvan]

Hi Nick, another great video and top job. What’s your little lunch bag? I need one for my healthy January lunches ha

[@NBundyElectrical]

Velocity pro gear lunch bag mate

[@matt4436]

Great job! as always Just a quick question; is there any way to connect these Wireless Kinetic switches to smart home like Google or Alexa?

[@Harismauk]

Yes, buy the Quientic switches with Wi-Fi support too. They cost about £10 extra per unit. My entire upstairs is ran with them and all controlable via IFTT, HA, Google Home, etc..

[@antjohn5383]

I’d have money on it that Fuseboard was done by an Aussie or Kiwi, over here they jam up to 10 singles cables in a main switch of all different Cross sections Wiring hot spots as well as fires here are so common....... RUFF as guts down under Wish we had those wireless switches out here

[@Cablesmith]

sounds like not only did he do a **** job, he knew he’d done a **** job also 👌🏼 wonderful

[@NBundyElectrical]

lol too true mate, and cheers

[@callumsimpson954]

You should do that swap apprentice for the week LOL!

[@sniperdustify]

Can't be David savery the language is too polite 🤣🤣🤣

[@NBundyElectrical]

Too true

[@sniperdustify]

Love his videos they do make me chuckle and everyone knows he hates cu 🤣

[@markrussell4282]

Do you or did you need to use any kind of sealant or similar for the cables entering at rear of C.U? I watch quite a few different sparks fitting boards on Y.T and each almost have their own opinion and method of doing so.

[@NBundyElectrical]

I haven’t here as it’s the loft above , but have done in the past, to be honest it Varies from job to job bud

[@chanellistrik]

selalu menyimak nick,saya yakin kelak indonesia pun akan ikut memakai saklar lampu seperti itu 👍

[@fatpedro5588]

Adam's work is bang tidy. Nice one young Ads.

[@Harismauk]

Loved Adam's piece to camera, watching at 1.5x speed he sounded pretty similar to Nick to the point I had to do a double take. Happy to see the way I wired all my quinetic switches up was the same way as Adam did with insulating inside another box. I didn't think to use a XL wago box though, would of been easier than an IP67 external box and cable glands.

[@barkingupthetree]

“Looks like Dave’s handwriting” 🤣🤣🤣🤣

[@RetiredandLivingthedream]

Do Keto once your on it you do not feel hungry. Good luck in the new year loved your frosted windscreen nice warm sunshine here.

[@timhoward7037]

Just wondering was it 3 N and 3 L in the RCD or 6 of each? I've come across this when someone wanted to add RCD protection for the ring final circuit and it turned out to be both ends of the ring and a spur. I never did work out why they didn't just pick up an RCBO...

[@NBundyElectrical]

Sorry explained it badly, 3 n 3l, it’s was a ring and boiler spur in it,

[@markdavies7212]

Maybe the previous electrician was a fan of the group “extreme” check out the main lyrics for “get the funk out”

[@rhdoorsshutters5517]

Thought the same. Probably singing along as he wrote it.

[@pinmast0r]

The words are from 90's hair metal outfit Extreme - song is "Get the funk out" :)

[@stevendrennan167]

Hi, I notice these are not the Quinetic versions but they are functionally the same. Do the ENER-J switches and wifi variants work with Quinetic variants and use the same wifi App

[@ThomasHeather]

What a pair of legends

[@NBundyElectrical]

cheers dude

[@alexg113]

Haven’t watched the video yet but that might be the best thumbnail ever. If I don’t see genuine Adam tears I won’t be happy.

[@NBundyElectrical]

😂😂😂 there was tears when he was in the loft

[@simonabbott7323]

Switch cabling is within 150mm of corner, so would be OK even if switch is removed.

[@magnumelectrical1790]

Have you not used the new Quinetic switches. They have covers over the terminals, saves buying the extra wago box. Just an FYI if you didn't know.

[@NBundyElectrical]

good to know thanks bud

[@steveb1856]

The TLC Quinetics will take the double insulation into the module so can be properly terminated without an additional enclosure but there is no provision for termination for the CPC, however you can just about also fit a 221 wago in there to terminate the cpc.

[@kcc3127]

Maybe it's just me but I can't find the Amazon link you talk about on any of your videos for all the tools etc you use... 🤔

[@tunnel7]

House bashing is for the young Nik, Adam's a Star, quality work from him in Attic well done. Oh and did you change that Flexi conduit you used in that GARAGE I hope you did.

[@NBundyElectrical]

👀👀👀

[@dg2908]

@@NBundyElectrical you might be the Kopex King but at least you're not the Deadlock Dunce!

[@HeathenGeek]

19:00 I see Adam retiring from sparky work to do an OnlyFans in the near future 🤣🤣

[@NBundyElectrical]

Too true

[@peterconnolly4608]

Hi, when your doing insulation testing surely your isolating the electronic quinetic switch by isolating ,/ bypass ?

[@NBundyElectrical]

We test by connect l+n together mate to mate sure that we don’t damage it, but I’ve heard that you can just don’t wanna chance it , maybe a test video in the unit ?

[@peterconnolly4608]

@@NBundyElectrical that might be Adams challenge soon to , 👍

[@reecevaughan4225]

Loving the videos man, would be interesting to know on each job how much you charged - doesn't have to be exact just a range.

[@bartman58]

Unless it was David savoury he needs a slap ha.....your knowledge and practical skills are on a different level to most spark trust me

[@davidpatterson1574]

Good stuff lads--

[@arniewheeler4673]

before i even watch after the pause of starting, is it Savery?

[@NBundyElectrical]

I did ring him to ask

[@james1c763]

Good work Adam.

[@seriouslycreepy666]

I think he was an extreme fan as its one of there songs lol 🤣🤣

[@jzxb6l]

The grey matter has had to think on this one, but the light switch Adam was taking off was one from the Tenby? range of accessories which were made around 1991 (ish). This would tie in the release of the song called "Get the funk out" by Extreme which was around the same time so its quite likely this was on the radio when the board was being fitted when the house was being built. Wouldnt be surprised if the whole row of houses had the same calling card of that sparky in the CU.

[@philipsmith0752]

you do good job Nicolas & Adam

[@NBundyElectrical]

thanks Phil

[@Waynesworldofgaming]

What year apprentice is Adam? His work is spot on to be fair 👌🏻 I’m going to make my apprentice watch this and tell him to up his game 😁

[@NBundyElectrical]

lol 2nd year dude, he's starting to tell me what to do

[@Waynesworldofgaming]

@@NBundyElectrical 🤣🤣 he’s a good lad nick, keep hold of him 👍🏻

[@mathman0101]

Keep encouraging them and take a fatherly approach their success is your success. Well done to you both.

[@Waynesworldofgaming]

@@mathman0101 nah I’m only playing, my apprentice is great, I wouldn’t be without him at all he’s a year behind Adam in college and not had as much experience, he is coming on leaps and bounds

[@ExtremeShez]

2nd year, wow. Impressive. Good work Adam.

[@stephencoulthard1718]

Was waiting for you to quote DS "Biscuit Tin of W****k" :)

[@giovanniturco6428]

Hi fantastic video again I have economy 7 heaters in my property on they wall they have on and off switch I want to change them to smart switch like meross smart switch I want to control the time on my economy 7 instead coming on at 12.30 every night

[@ponemark]

Similar thoughts here but serious amount of current to switch, did you find solution ?

[@giovanniturco6428]

@@ponemark hi yes I ended up buying smart switch 20A that works with HomeKit now I can control my economy 7 never had any problems with thanks to nick didn’t let me know I did unsubscribe from is channel

[@grumpywoodiam]

Hi Nick, do you have a link to the large spotlight you were using. Great for as normal.

[@NBundyElectrical]

unilite.co.uk/product/rl-5250/ Use code BUNDY25 for 25% off mate 👍

[@deandon08]

Your discount code isn’t working Nick

[@stuartarnold9444]

@@deandon08 It does the discount right at the end.

[@RichardArblaster]

Great video 😎

[@metrotechguru5863]

You lads are the best.

[@NBundyElectrical]

Thanks dude 🙌

[@Raffaz2006]

Extreme lyrics 🤣🤣

[@dishydave1819]

he must have done it in the 1990's when Extreme were in the charts .... one of their greatest hits had that line with "funk" not ...... as the chorus. Great band ..... for us old fogies anyway :-)

[@daxw2460]

Good banter with Dave the slave!

[@daveaustin53]

Lol - non-Wago connectors in a Wago box! Sure someone has, or will, whinge about that! (Personally, I've given up using Wago boxes - the clips/holders for the connectors are a blasted pain).

[@Ozbert]

It's paraphrasing the song, "Get the funk out" by Extreme. (They called it "funk" but if you listen to it they actually say "fu*k".

[@richn643]

Hi, I like watching your videos of some terrible installations,so much so I have one of my own, multiple electricians have added to it over the years and now I am having big problems,how can I send you a photo of my consumer unit to see what you think ?

[@themetalmicky]

is that adams booster seat in the back of the van

[@davegreen2049]

Adam can film at mine on the 25th mate

[@DANNYBIOSHOW]

18:34 HEY STEP BRO.

[@bill6953]

Just wondering why you used red & black cores for light rather than brown & blue? I thought that was the old colour code Thanks and your content is great

[@Arachnoid_of_the_underverse]

Brown and blue are the IEE regulation colours of UK cabling for live and neutral, earthing being green and yellow. Black and red were the previous colours ,so old cabling if its come across.

[@bill6953]

Correct. So why use old colour code on a new installation (light)?

[@chriscook7049]

@@bill6953 If the cable is in place and in good condition, why replace it? Unless the customer wants to pay for the extra time, then its just a waste. There's no rule saying you have to replace old cable, just label the board as having both wiring schemes. Competent electricians aren't going to get confused as long as the old colours are used correctly. Less competent ones will still find a way of messing things up even with the right colours.

[@ExtremeShez]

Your skin looks better Nick, unless it's that snazzy Sony camera 😜

[@darrenwardell3079]

Nick check out a song by Extreme called “get the funk out”. Might make a bit more sense👍

[@johnpotter9743]

You beat me to it Darren😀

[@briancohen1967]

Bulb is it a tulip

[@LCh-dj4up]

Nick don't know if u remember me liam plasterer used to do work for yeomans. Mad how u popped up on my KZbin

[@FNUKSTER1366]

Shame kinetic switches are un reliable, having to power them down , like rebooting a computer .. after they become unresponsive 🙁

[@NBundyElectrical]

I’ve not had an issue so far mate so fingers crossed

[@FNUKSTER1366]

@@NBundyElectrical fair play matey , I've probably just had a bad batch from production

[@steveb1856]

I used two to control bathroom lights and fan, I’ve only had to re pair mine once. Make sure the modules are easily accessible just in case!

[@zenaasura1769]

So beautiful ❤️

[@montystelevision3238]

Maybe the last Electrician had a Gold Card

[@4ynert]

My guess is the previous electrician was listening to the song by the band Extreme " Get the funk out" prior to doing the switchboard, lyrics are as follows: "If you don't like what you see here Get the funk out"

[@dimitar4y]

delightful

[@Carl_sock]

Ace Video

[@chrisball8431]

🤣🤣 Dave will not be happy

[@jonathanrose456]

Finally got the message? 🙃😂

[@NBundyElectrical]

😂😂😂

[@MachineryNation]

Hey Nick, great videos! What tools are you currently using? If you fancy something Milwaukee, drop us an email!

[@CAR_SOLUTIONS]

Lol he admitted he did a poor job

[@blizzardxc12]

Think the painter is high on paint fumes

[@glynwatkins9968]

@N Bundy Electrical hey bois

[@sirronnitram8937]

Nigel and Dave, what bodgers

[@arniewheeler4673]

don't mean to stomp on your territory fella but i'm in Lichfield in Morning, brother of a client in Cornwall, so i won,t be outstaying my welcome. In... then out is the plan, bit stealth like..

[@NBundyElectrical]

wave if you see u mate

[@arniewheeler4673]

@@NBundyElectrical i defo will chap

[@NivagSwerdna]

@5:19 The hand writing does look familiar, but the usage of words is not DSES style, it would have had several C*CK and W*NK at least. Also I'm not sure he would have tried to ram six things in the same hole, he would have sought out a different orifice.

[@gm1777]

N&A Electrical in a couple years time 🤔

[@NBundyElectrical]

Hey you never know , or Dunlop electrical and I can work for adam 👍

[@judderzm2252]

Propper job buy some good blokes 👌

[@Fishbait075]

GOOD MORNING Nick and Adam. Why are you shouting :(

[@arniewheeler4673]

top job, limbo.....

[@tobyrattray2359]

Arnwold!

[@arniewheeler4673]

@@tobyrattray2359 Rat baby... hehe

[@brenrich3250]

Next episode Nick and Adam get Hair Cut.

[@chrismclaren113]

KZbin said on swearing

[@ColinRichardson]

Two Apprencises One Cup

[@NBundyElectrical]

😂😂

[@Arachnoid_of_the_underverse]

Flexible working ;)

[@lesmoor001]

its a line in a rock track.Extreme Get the Funk out

[@arniewheeler4673]

wish i'd watched further now, sorry David

[@jamieblatantsparky]

No need for electricians to be using foul language

[@farmersteve129]

Best keep away from Dave Savery then...

[@jamieblatantsparky]

@@farmersteve129 never heard of her

[@davidbanks4268]

Just wondered if the clients and anything your filming is consented to or do you just film what you want. I do house removals with loads of different situations and properties that i think would be interesting and entertaining to watch but didn't think i could film there homes and addresses and post them publicly. I've thought about doing this filming stuff for years but didn't think i legally could but after you told us how much you earn. I'm tempted but don't want to get sued. Also if they see the video and realize how much your earning from filming in there property are they entitled to be paid aswell!! just curious about how you deal with any legalities. Great videos tho.

[@johnkulpowich5260]

I. HATE. FIBERGLASS. Just looking at makes me gag