Pioneer RMX-1000 | How I Use It!

[@ElectronisoundsAudio]

#watchthevideoitanswersallthequestionsthatswhyimadethevideo

[@3d_Ink_Oficial]

Dude...this is without a doubt the best review of the rmx- 1000 on KZbin

[@ElectronisoundsAudio]

Hey Hey! Thanks for the encouragement! Much Appreciated! 😁🙏👊

[@naturalrhythm_original]

I agree 100%

[@adammork7171]

agree, best one so far

[@ElectronisoundsAudio]

@@adammork7171 Hey Hey! Thanks for the support! 🤗😁👊

[@Festivals-rq1pq]

I agree

[@richardpetersson3747]

Best video on The rmx 1000 period!👑

[@ElectronisoundsAudio]

Hey Hey, Richard! Thanks for the support! 😁🙏👊

[@chaosparticles]

I loved that! Really good descriptions. I was smiling through most of it and then started chuckling when you slammed the lovely Drum & Bass on at the end and the camera started bouncing! Thanks so much for the enthusiasm and the tunes. Quality!

[@ElectronisoundsAudio]

Hey Hey, Simon! Thanks for the support! 😁🙏👊

[@jjlacey1970]

i use one of these during production, then i put the whole mix trough it when ive finished the mix, then master it. very versatile fx unit. prior to that i used the korg kaos pad quad to do a similar thing (a lot cheaper to). excellent demo of the machine dean :)

[@ElectronisoundsAudio]

Hey Hey, Freddie! Thanks for watching! 😀 👊

[@smyth1989]

Watched this so many times and I’m always discovering new things. Love this video mate. Top man.

[@ElectronisoundsAudio]

Hey Hey! Glad to help! 🤗😁👊

[@mwhitelow9312]

I’ve been waiting years to get this thing and I finally pulled the trigger. Great vid as always Dean!

[@ElectronisoundsAudio]

Hey Hey! Thanks for taking the time to watch! Big Ups! 😁🙏👊

[@isisazarene6533]

best rmx vid on you tube! well done man!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁🙏👊

[@DjKetoVanHarum]

Absolutely amazing review video!!

[@ElectronisoundsAudio]

Really appreciate the support! Thanks! 😁🙏👊

[@pushedupstairs]

Super informative. I wish I had a demo this clear for every piece of equipment I consider purchasing. 🙏🏽

[@ElectronisoundsAudio]

Hey hey! Thanks for the support! 😀 👊

[@MythMakerMusik]

Excellent and informative demonstration. Thanks!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😀 👊

[@BoardnotBored]

Dude, this is an awesome tutorial on this unit. Digging the sounds you're working with too. Thanks 🤙

[@ElectronisoundsAudio]

Hey Hey! Thank you very much! 😁🙏👊

[@turricanjim5898]

Just purchased one of these and I must say….. what a fab bit of kit. And well done for such a good in depth review of this device!! 👍🏻👍🏻

[@ElectronisoundsAudio]

Hey Hey, Jim! Congratulations on the purchase! These are a lot of fun!! 😁👊

[@Peter-zw8yn]

Happy to see a recent video on this unit!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁🙏👊

[@mylarmelodies]

Brilliant video, very well explained and structured.

[@ElectronisoundsAudio]

Hey Hey! Big fan of your content! Thank you for all the ideas and tutorials! So much appreciated! 🤗😁👊

[@mylarmelodies]

@@ElectronisoundsAudio Thanks Dean!! You got me wanting an RMX now, would be potentially killer on top of the modular for live sets.

[@Claidheambmor]

Best video about this device on the internet

[@ElectronisoundsAudio]

Hey Hey! Thanks for checking it out! Big Ups! 😁🙏👊

[@christiankaiser5961]

this looks like a great piece of gear!!!. very exciting looking work flow with this thing. total bells and whistles piece of hardware for production

[@Ferhat_Dursun_DJ]

SO TRUE !!!! ...this is without a doubt the best review of the rmx- 1000 on KZbin, THANKS FOR THIS VIDEO

[@ElectronisoundsAudio]

Really appreciate the support! Thanks for watching! 😁🙏👊

[@DJBre]

Beautiful tutorial, I got mine last night and having a blast!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊

[@MaTTiiBeaTz]

Thank you so much for this review!!!!! I was shocked to see their wasn’t an in-depth tutorial on the rmx 1000 till I found yours🥇🙏🏻🙏🏻🙏🏻

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@grazstarr]

Man that beat at the end was insane. Props!!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😀 👊

[@lolhappyOO7]

Top tier video! Thanks so for much taking the time to help others understand the gear ⚙️

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁👊

[@walrtbstudios5430]

Looks and sounds like an insane amount of fun, but I’ll leave it to you young’uns... Great video as always!

[@tylon2999]

Thanks for this review as I just got mine back after 8 months in the repair shop its great to see a new review of an older product. Because of the age expense and being marketed as a dj efx a lot of people are unaware of its production potential. I would buy another one but I keep hoping Pioneer will release one with analog filters. For production it's fine as I run it through analog efxs,but if it had analog filters I could use it on the front end of my Xone 96 . Thanks again for the excellent overview.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@tylon2999]

Just a follow up on my comment it stopped working again, cannot be repaired.

[@ElectronisoundsAudio]

@@tylon2999 Aaaaack! What a bummer! 😵

[@mullen6134]

8 months? Shame on that repair shop

[@Amatteus]

Man.. you started saying this was not a deep review. And is one of the best i have seen.

[@ElectronisoundsAudio]

Hey Hey, Amatteus! Thanks for the support! 😀 👊

[@Amatteus]

@@ElectronisoundsAudio Very well explained. To be complete you just missed showing: a) the several ways of connecting it, b) updating firmware, c) loading your own samples in the groove box, d) choosing your own configuration for all the effect buttons with a software called Remixbox, and e) using the vst version from your daw for production. This is what I am struggling with now. And there are no videos with deep explanations of these features. This machine is much more than a simple effect box for Djing with Pioneer... I have also seen people connecting it to Electron digitack. and is good for live Dawless performance. I wonder to how many other instruments you can attach it.. Maybe To my Roland TR8s.. That would be a killer.. All the potential f the TR8 S, with those effects.. I might try it..

[@ElectronisoundsAudio]

@@Amatteus The title of my video says it all - "How *I* use it. This is not a *every kind of possible detail* video, like I say in the video. It's not a video on the vst version or how to use the vst version - that would be a whole video in itself... lol This video is already 30 min long! You can connect this box to *ANY* piece of gear or groovebox or dawless system - and that's the point - *no special connections or routing* - just plug and play. The deeper features are best learned from the manual, imho. 👊

[@Amatteus]

@@ElectronisoundsAudio I am not complaining. Just informing you of what I miss after looking at more than 10 videos about RMX 1000.

[@oddverse2968]

Bravo!! By far the best video on the rmx1000

[@ElectronisoundsAudio]

Hey Hey! Thanks very much! Cheers! 😁🙏👊

[@SEONNTHAPRODUCER]

Nice. Never heard of this gear but this looks amazing. I'll have to add it to my list.

[@ElectronisoundsAudio]

Hey Hey! 😀 👊 It is mostly marketed towards DJ's, not as much towards "live hardware gear jammers" --- which is *exactly* why I wanted to show it! 🤓 👏 This thing really brings a whole new dimension to live "DAWless performance"! WOOT! 👍

[@wackerburg]

A friend gave one of these to me a few months ago and I did not expect it to be good. BUT... *I was positively surprised!* Not only didn't it degrade the sound too much, unlike the Pioneer DJ mixers - after adjusting the effects parameters to my taste, there are some really usable features on this thing. Yes, the reverbs sound artificial and flashy most of the time, but when used with care they can add something to a performance. It would have been great if Pioneer would have thrown in MIDI for syncing and also controlling the unit from an external surface or sequencer. Great video!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊

[@tonyborie788]

I’m digging the track as well. Top notch

[@ElectronisoundsAudio]

Thanks for the support, Tony! 😁👊

[@thedoorsman12345]

Thank you mate, very informative, love your passion for music and excitement over creating a vibe. Keep making videos man! The emojis are fun too :)

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁🙏👊

[@AnthonyHuttley]

Suuuuper helpful. Thanks!

[@ElectronisoundsAudio]

Glad to help, Anthony! Thanks for watching! 😀 👊

[@zero131056]

Fantastic review and extremely educational

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊

[@iamgeorgemoran]

Thank you for this awesome video

[@ElectronisoundsAudio]

You're welcome! Thanks for watching! 😁🙏👊

[@frankygers]

This is superb. I’d love the track you have running in the background 🙏🏻❤️

[@ElectronisoundsAudio]

Hey Hey! Thanks for the kind words! Big Ups! 😁🙏👊

[@DreamlessElectronic]

Great stuff from 19 minutes on. Using effects for impact. I want to try that with the MultiStomp.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@tomabankster]

Meilleure présentation du Rmx 1000😉😉👍👍

[@ElectronisoundsAudio]

Hey Hey! THANK YOU! 😁🙏👊

[@giantsupercell]

awesome demonstration and great sounds!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😀 👊

[@TheBaronOfBurundi]

Many thanks, your review's incredibly helpful! Nice backing tracks too :)

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁👊

[@DjMorningstartrancedj]

Great review

[@ElectronisoundsAudio]

Hey Hey! Thanks for checking it out! I appreciate the support! 😁🙏👊

[@rhythmdroid]

You're an excellent demonstrator, man. Seriously.

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁🙏👊

[@ortizmusic7115]

Can I hook up the 1000 to the pioneer dj RX3

[@ElectronisoundsAudio]

Did you watch this video? I go over the audio routing and connections of course... ;) There are no special routings. It's just audio. You can plug the AUDIO - from *anything you want* into it. 😁👊

[@ortizmusic7115]

@@ElectronisoundsAudio ok cause I'm about to purchase both pieces, I been DJing since 1979 but in the 90s I got away from it for a while, all this new technology is new to me, I'm from the Technics 1200 and bozak mixer era, can't wait to go to work on this new equipment, it practically does all the work for you, I remember editing on a teac reel to reel, now you just punch the trigger button, thaxxx for the video.

[@tj4764]

Great video! Very well explained! Thanks

[@ElectronisoundsAudio]

Hey Hey! Thanks very much, Thomas! 😁🙏👊

[@adamv6942]

Awesome video man! I wish this was around when I had first bought mine! Definitely the best rmx-1000 tutorial out there!

[@ElectronisoundsAudio]

Hey Hey, Adam! Thanks very much! 😁🙏👊

[@night_speed]

Great video. I had never heard of this thing and just happen to see one in a random video and was happy to see that you have a demo of it. Now i want one. Nice dnb groove too btw.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@DEBOASSE]

That mean 👿 bass drive tho! Definitely a great product guide! Thank you for this video!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁👊

[@richyyrob8062]

Bro you are the best. What a nice teaching 😂

[@ElectronisoundsAudio]

Yo! Thanks for the support! Big Ups! 😁🙏👊

[@jimigrok]

nice introduction ! Thanks

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching, Jimi! 👊

[@darrenbrown3492]

absolutely brilliant thank you

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support, Darren! 😁👊

[@konpadelic]

Thats a cool little device

[@ElectronisoundsAudio]

Thanks for watching! 😁👊

[@metavibra2488]

Your video is super informative. Thank you very much for sharing this video!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! Love the RMX!! 😁👊

[@MrJojonino]

Just bought mine. Video helped out a shit ton

[@ElectronisoundsAudio]

Hey Hey! Glad you found it useful! Big Ups! 😁🙏👊

[@RANDOMLOOPGENERATOR]

Loving this Dean, really think I've found my next purchase! This will breath soooo much life into my live performance! Great work as always brother, big love from RLG 👊💜👌

[@ElectronisoundsAudio]

Hey Hey Gary, Thanks for checking it out! A Lot of power in this one for live performance! WOOT!! 😁👊

[@kareleggerding3010]

Awesome review dude!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁👊

[@nunurox]

Thank you for the tutorial on the Trans and Gate. 🔥🔥🔥

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@bishun]

Thanks for the competent review. It can be hard to find content that isn't intended for a beginner audience. I always prefer to see hardware (in action in addition to reading and researching).

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@pirre6404]

Perfectly explained, mate!! Thank you very mich for your effort!

[@ElectronisoundsAudio]

Hey Hey! Thanks very much! 😁🙏👊

[@Gabrielrose.mp3]

Thanks, bro. Really useful tips.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁👊

[@makeda_cultura]

best review in my opinion too!

[@ElectronisoundsAudio]

Hey Hey! Thanks very much for the support! 😁🙏👊

[@makeda_cultura]

@@ElectronisoundsAudio pleasure!!!!!

[@WILHVLM]

awesome tips bro!

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁👊

[@fzfzfzfzfzfz]

Great video. Very good suggestions how to use it, specially in subtle ways.

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😀 👊

[@fzfzfzfzfzfz]

@@ElectronisoundsAudio are you using the rmx for music production in your DAW too? I bought it primarily for that. It's really nice to throw some effects with a hardware unit after the track is fully mixed. You can just play around it like a DJ. Much more intuitive than programming in the DAW.

[@ElectronisoundsAudio]

@@fzfzfzfzfzfz I need to try that!! 🤗😁👊

[@fzfzfzfzfzfz]

@@ElectronisoundsAudio the RMX 1000 has a VST plugin. You connect the RMX via usb and control the plugin. Make sure to check it out! It's one of the best uses of this hardware.

[@ivandiamond4640]

`Great Video review Dude... many thanks, great info and demo... Cheers I.

[@ElectronisoundsAudio]

Hey Hey, Ivan! Thanks for the support! 😀 👊

[@the_electronicTech]

I am struggling to record my mixes using RMX-1000

[@ElectronisoundsAudio]

Sorry to hear you are having trouble! 😀👊 You didn't actually say **what** the trouble is, so I can't offer any advice here.... Just run your audio in to the RMX-1000, and run the output from the RMX-1000 to *any* type of recording device and record the mix?

[@f3niks]

Great tutorial .

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁👊

[@Aesop101]

Is this compatible with a Denon Prime 4?

[@ElectronisoundsAudio]

It doesn't require *any* special routing. You plug your MASTER OUT from *any Mixer or device* into it. (Watch the video! ;) 😁👊

[@Aesop101]

@@ElectronisoundsAudio Any later version out?

[@ElectronisoundsAudio]

@@Aesop101 No, not that I know of. 👊

[@Aesop101]

@@ElectronisoundsAudio Thank you.

[@Aesop101]

Got mine today. Do I need to install software on a micro sd card in order to use this? I get signal on RMX but no effects coming out

[@richyyrob8062]

That’s was a very nice tutorial from u, how can Connecticut to. DDJ SZ control?? Or how can link it up to any controller

[@ElectronisoundsAudio]

Loke I explain in the video - it doesn't require ANY special connections - just master out from your setup (whatever that may be) into this. it's really that simple.

[@gm1668]

Great video and nice sound

[@ElectronisoundsAudio]

Hey Hey! Thanks very much! 😁🙏👊

[@EdBMetal]

This is such a cool demonstration Dean. I use the iPad version but although i understand what the buttons do i don’t always know how to properly use things in a way that actually makes sense in a jam. You clearly explain those things here very well. Very fun and educational video even for users of the software version i think. Thanks! 😉😎👍🌟

[@ElectronisoundsAudio]

Sweet! That is great to hear! 😁🙏👊 Thanks for watching, Ed!

[@bartjanc]

@Ed B Metal, can the ipad version be controlled by a midi controller?

[@raphaelpad]

Excellent video! Thanks

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@mowbyone]

Great demonstration thank you 👍

[@ElectronisoundsAudio]

Hey Hey, Thanks for watching, Homie! 🤗😁👊

[@trancegurustrancecorner6869]

Cool video. Very informative.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊

[@jasabasenara8124]

Great video. Thanks.

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😀 👊

[@jasabasenara8124]

👍@@ElectronisoundsAudio

[@qrdnk]

I don´t own any PIONEER mixers and I have never owned one but it´s still interesting how to do tricks with the crossfaders and channel switching. Guessing you know I´m a QUASIMIDI freak, I absolutely love your content, no matter if it´s XXX-related or a mix wich contains QUASIMIDI gears ;-) Owning a lot of QUASIMIDI gears, I will always be looking forward to enjoying your videos!!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching!! 😁🙏👊

[@qrdnk]

@@ElectronisoundsAudio You´re welcome! I have many QUASIMIDI products, some of them a numberous time ;-) ...neverheless, it´s always a pleasure to watch your content!

[@gm1668]

Thank you for this great video man

[@ElectronisoundsAudio]

You are very welcome! Thanks for watching! 😁🙏👊

[@OCEANSINSPACE]

That little audio loop grabber is SO nice on mid agreed@!

[@ElectronisoundsAudio]

Right?!?! I really love that effect! 💙 Depending on the exact timing of when it grabs the incoming audio, it can create some really sweet rhythmic variations!! 👍👍

[@NEMARKO]

Bro is this product 2019 or from 8 years ago? I want buy one.. thanks

[@ElectronisoundsAudio]

I got mine new in 2019. They are still readily available and easy to get. 👍

[@NEMARKO]

@@ElectronisoundsAudio thanks 🙂

[@Flashback_Jack]

Honestly not sure I need this with my DDJ-1000. Is there a way to isolate the effects to one of the deck's four channels or are the effects global?

[@ElectronisoundsAudio]

Like I show in the video, you just plug in audio in and audio out to this. There are no special connections. How you route it in your system is entirely up to your and your specific workflow/needs. I don't have that mixer, and i'm not a DJ, so I don't have any specific insight here, sorry. 👊

[@DamonHodgesOfficialPagePlus]

this was really awesome you sold me..I will purchase this,,, can this also record your set?

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 🤗😁👊 Unfortunately, it does not have a built-in recorder. That would be crazy sweet, though - I wish they had put that in there!! 👍

[@DamonHodgesOfficialPagePlus]

maybe in the future :-) I will subscribe to your channel... a great review and I really enjoyed watching this video. I saw no one using this in 2021.. maybe not so popular among DJs but I can see this being very useful.

[@4nd1ist]

Can RMX 1000 pair with DDJ 1000 For recording and cueing in headphone ?

[@ElectronisoundsAudio]

Hey Hey! Like I said in the video, i'm not a DJ. I don't have or know the DDJ 1000, but this just works with audio in and audio out - no special routing of any kind. 👊

[@tomcrothers6974]

Sick video, really well explained. Can I link this up to a pioneer xdj rx3 controller?

[@ElectronisoundsAudio]

It's just AUDIO, you plug your MAIN audio output of ANYTHING directly in to this. It's that simple. 👊

[@ludooo2368]

Is the RMX-1000 compatible with the pioneer xdj-xz?

[@ElectronisoundsAudio]

Sorry, but I don't know that unit. As explained in this video though, all you do is run the audio out from your mixer into this, and then audio out from this into wherever you are running your audio. There are no special connections, just standard audio cables from your master audio out. It auto-detects the BPM from the audio input. 👊

[@ludooo2368]

@@ElectronisoundsAudio Thank you! Do I understand that right, you could use basically any unit with the right connections and there are no issues with quantize and bpm detection/tapping? Also I just found out about the RMX-1000 but your video already has given me a great impression, of what this beast can add to a mix! Thanks for the quality content. Subscribed!

[@ElectronisoundsAudio]

@@ludooo2368 It's not always 100% perfectly seamless, but for the most part, yes - you are understanding correctly. 🤗😁👊 You can seriously use this with ANY audio source, from drum machines, Dj mixers, grooveboxes, even CD players and Turntables, etc. 👍

[@milanskarvada7492]

best video with RMX 1000 on You tube u when my english is not the best so i understood everything 🙂

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@djtapaj]

The best and the best overview of this unit, very very educational. You make it easy easily easier. Thanks for sharing the knowledge. Can i used the output of this unit straight to Speaker or an External mixer. I am using DDJ 1000.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊 Yes, the output from this would go directly to speakers or your main mixer before the speakers. It's basically the very last thing in the audio chain.

[@djtapaj]

Thank you for your reply. I've always thinking to include some finger drum to my sets,this video help me to choosing a gear, I learn alot from your videos. thanks and Much respect.

[@frae-frae1940]

Thank You

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching - Hope it helps you! 😁👊

[@Akillitvshorts]

Can you use this effector with no daw, hardware only setup?

[@ElectronisoundsAudio]

Hi! Did you watch the video? 😀 👊 I'm using it with no DAW, Hardware only for this entire video. The answer is YES you can! (...watch the video - that's the point of the video... it answers your questions...) Also..... Watch. The. Video. 😏

[@Akillitvshorts]

i see... one last question, if i were to use this on a hardware only set up is it possible thru a mixer to use this on individual channels and master channel easily without plugging in and out any audio cables?

[@ElectronisoundsAudio]

@@Akillitvshorts Not that I know of. I don't know of any mixer that will allow you to use it as a *send* and ALSO on the Master Channel. It would be either one or the other. Also, this is meant to work as an *insert* fx, meaning it won't work as intended when used thru a SEND. You would typically just run the MASTER out of your entire mix - into this. 🤗😁👊

[@Akillitvshorts]

@@ElectronisoundsAudio thank you for your replies i appreciate it ^^ youve just gained a follower. Keep up the good work 💎

[@ElectronisoundsAudio]

@@Akillitvshorts Hey Hey! Thanks for the sub! 😁🙏👊

[@35ozgur]

I bought recently djm 750mk2 mixer it's also making some effects.... but this baby is awesome...

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@vinblake3676]

oh lord, even as a hobby/home dj myself, I really need this in my life! Kinda expensive though if you ask me, but probably worth it. Seems I know what to work for 2021. First goal of 2021 is set haha. Great review, Thnx

[@ElectronisoundsAudio]

Hey Hey! Thanks for the support! 😁🙏👊 Very expensive for sure - this is definitely aimed at DJ's who are making (or attempting to make) $$$ by playing out, rather than home-based DAW less jammers. I really think it can add a lot to a performance though, and really take it to the next level when you're trying to find or create "your sound". ❤️

[@vinblake3676]

@@ElectronisoundsAudio Thnx for the quick response. I was browsing the internet to find some external equipement to add on to my DDJ-800 or my old school technics decks. Only decided 3-4 months ago I would go digital and try it out (been spinning for a hobby for about 20 years now, coming from technic turntables + DJM-600 mixer), and this is right up my alley really. I have some friends pushing me a bit to go to livestreaming, since they think I'm talented at what I do (their words, not mine lol). So I might consider it tbh. These are actually hard to come by here in Belgium it seems, but I'll keep my eye out for a good priced one. Also, you got a new sub, you explain things really well. Have a happy 2021, and lets hope this year will be better that the last one! Greetz from Belgium.

[@ElectronisoundsAudio]

@@vinblake3676 If you've got friends pushing you to do it, there *must* be some talent there! YOU GOT THIS, Man!! Dooooo It!!! (...and shoot me a link to your livestreams!) 🤗😁👊

[@vinblake3676]

@@ElectronisoundsAudio Thanx for the motivation, really appreciate it! Also, got a Shia LaBeoaf feeling when you said 'Doooo it!!!!' Good luck with your channel, hope it grows...

[@muziqvault7082]

Awesome video, Nice Desk! where you get it?

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊 I had the desk custom made specifically to fit the space in here.

[@BogdanGabriel069]

what song did you use in the video at 4:24

[@ElectronisoundsAudio]

Sorry, people keep asking about the music in this video. I'm just using my own music that I made to avoid any copyright strikes or issues. If you like the music, please consider subscribing and checking out some of my live jams! 🤗😁👊

[@Brooklynapoli]

Amazing

[@ElectronisoundsAudio]

Hey Hey, Thanks for the support! 😁👊

[@eyesintheskies]

Wish strymon or eventide would make something like this, it would slay!

[@ElectronisoundsAudio]

That would be interesting for sure, but this one works just fine already, though, haha.... What would you want to be added or made different in a new version? 😁👊

[@Sirio1983]

Hello, do you buy xone db4 or 900nxs2 with rmx 1000? What do you choose you?

[@ElectronisoundsAudio]

Sorry, i've not used those other mixers - just the db2. You just need to make sure it has the features you're after - i.e. how many individual FX units, looping tracks(?), external aux sends if you need them, etc. GOOD LUCK! 😀 👊

[@niloklunder8256]

Really nice video, as a LIVE musician and not a dj its nice to get a different type of opinions by someone thats not a dj. I have a question tho, I see there are two types of inputs, could you use these inputs simultaneously? For connecting a looper and a beatmaker separately and use the mrx1000 also as a mixer. That way I could save a lot of space in my setup allowing me to replace my mixer by the rmx1000 and getting some really nice effects on top.

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁🙏👊 This is not a looper. It's made for simply plugging in to your master output of your main mix. It does not replace a mixer in your setup.

[@DjDieselLive1]

Do the effects have to play through the master or is there a way for it to play though one channel only?

[@ElectronisoundsAudio]

Think of it this way: The FX will be on whatever ***AUDIO*** you send into this box. If you don't want the entire track, then you'll need a mixer that has some kind of AUX SENDS for you to route whatever audio you do want, into this box. 😀 👊

[@wesleyvandewall8686]

I need help! How to connect te Rmx 1000 to ddjsx 2 When i connect i cant use te effects?

[@ElectronisoundsAudio]

You just plug the MAIN OUTPUT of your mixer into the RMX-1000. If you want to connect 2 DJ mixers to it, then you would need to sum those mixers together into a small mixer of some kind, then take the MAIN OUTPUT from that mixer into the RMX-1000. 😀 👊

[@wayneanderson2866]

Definitely cool! Got me curious!😜👊🏼.....would you say this RMX compares to a Korg Kaos pad type of gear?....in overall functions? Seems like they might work well together too!

[@ElectronisoundsAudio]

Hey Hey! They are definitely the same type of concept - run audio into it, and then effect and tweak your audio. 👍 That's about as far as the similarities go though - they both do different things to the sound. I actually have a KAOSS Pad 3, but haven't gelled with it... Need to find the time to try again! 😀 👊

[@stereohertz]

Nice Video! Thanks for the tutorial of RMX 1000!!! Is possible that I buy it soon!

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😀 👊

[@mrxnazax]

Excellent video, well explained and very clear information, would you answer me please if the rxm 1000 can be used with a pioneer xdj rr?

[@ElectronisoundsAudio]

It can be used with *anything* it's JUST AUDIO. Woot!! :)

[@mrxnazax]

@@ElectronisoundsAudio thank you for your fast response you had won a new subscriptor, your content its just stunning, 🙌🏼

[@andriyaniliev3344]

Hello! Thank you! Can I use with pioneer flx4?

[@ElectronisoundsAudio]

Did you *watch* the video? You can use it with ANYTHING, exactly like I say in the video. No special connections - just plug your MAIN AUDIO OUTS from anything into this and your good to go.

[@andriyaniliev3344]

@@ElectronisoundsAudio my English is not good. For this i ask you. Thank you!

[@gruvhard]

great video... thanks

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching, Jimmie! 😀👊

[@TheDavenport777]

i gotta have one thank you

[@ElectronisoundsAudio]

Hey Hey! Thanks for watching! 😁👊