Elego 6 dual output settings

In this video we can set invert second output setting in detail
please like , subscribe and share the video
for contacting us:
• Online Support

[@black_wolf_.]

Bhai elego dual mppt ha ya single? Or yeh inverter ksa hain reviews plzz

[@user-vy3dv9hc7i]

Good

[@naumanazeem3445]

Thanks

[@ahsaniqbal9280]

In the SBU, after the sunset, is it possible that the 2nd output switches the input supply from battery to grid at certain battery voltage (that we may set at setting 60) while the 1st output remain on battery?

[@crownmicrocustomercare]

No it's not possible

[@Smil9821]

Salam alaikum bhaei ap maherbani kar ka ak ak soler system ki videos ki series banaein . Kyun ka different logon nan different systems lagaen hn. Or ap bat bhe ak hi video man different inverter ki kar daten hn jis sa samajna man mushkil hoti ha. Kindy separate, separate banaen jasa ka 1.2, 2.2 ,...... 8.2.. thanks

[@crownmicrocustomercare]

Thanks for your feedback.

[@adnanmuazzam]

When L2 becomes off at battery voltage decreased to to set voltage in setting 60, you said that it turns ON back when both solar and wapda input becomes available... But my experience/observation is that as soon as wapda input comes it gets on... Is there any setting of a higher voltage level enabling L2 on again on solar only?

[@Lifewithtosif]

I am face same problem what is the solution. When solar available but wapda not available why my heavy load off. Even day time we need only solar for heavy load

[@TayyabNasir]

Same issue here. Plz provide solution for this. How to turn the load on again on solar only.

[@tariqabdullah5279]

U set battery voltage on #60 setting accordingly to battery health, less than 48V then shut down inverter for few minutes with first off solar then wapda and in last battery. After few minutes restore fist battery then solar &Wapda Now inverter gone on solar in case of wapda failure.

[@uniquesolar]

Plz explain ful setting of elego 6 if possible i will be thankful to u.

[@crownmicrocustomercare]

Please visit the channel Already made the full setting overview

[@mixstudio569]

Please make a video on just solar and wapda setting without battery. Because I'm facing tripping issue due to voltage fluctuation even I have extra voltages and Watt. My setup is 6kw elego 6 with 10 panel of 545 w

[@crownmicrocustomercare]

Contact us on our WhatsApp support

[@AyahsOfWisdom]

@@crownmicrocustomercare whats ur whatsapp

[@engr.muhammadawaisanwer377]

In case of load shedding, when will L1 get off?

[@crownmicrocustomercare]

When batteries are dead and solar is not available.

[@zeessae2070]

output shutdown means invertor shutdown or whole house shutdown?

[@crownmicrocustomercare]

The load which is connected on 2nd output

[@AbdulMalik-jp9ec]

Crown 5.6 kw xavier invertar have wifi builtin or using extra dongal pleas reply me.

[@crownmicrocustomercare]

Need external datalogger.

[@AbdulMalik-jp9ec]

@@crownmicrocustomercare data logar price please ? And availability ?

[@fahaduddin2666]

Is there an option to kill L2 Load if Wapda goes off and solar is not available. Purpose is to not run heavy load on batteries while the load in L1 can keep on running using batteries

[@crownmicrocustomercare]

Contact on WhatsApp support

[@ShaikhYaseen-hz8hy]

Aslam u alaikum

[@user-jz8nb9is4c]

I am using crown inverter 6kv.i am facing problem my solar is generating power for load .i want when solar power is less then load so it should take power from battery not wapda. i coverted my inverter from SUB to SBU but inverter still getting power from wapda.my battery are 54 v charging and stop discharging point is 46 which is by default.i didnt understand why its getting power from wapda even i converted from SUB to SBU and my solar is working and batteries are well charged.any help plz.thanks

[@crownmicrocustomercare]

Contact us on our WhatsApp support.

[@munawarshahid2195]

@@crownmicrocustomercare Please share WhatsApp number

[@zeessae2070]

What do you mean in the second output?

[@crownmicrocustomercare]

It's our priority load

[@jahanzabbaloch234]

I have solar panels of 6000 watt total 11 plates If i switch off wapda and run any heavy load like water pump, system get tripped. I am not using batteries… Is there any setting for tripping

[@crownmicrocustomercare]

Share the problem on WhatsApp support with us.

[@mianzulfiqar4632]

Hi​@@crownmicrocustomercare

[@sherazmalik582]

Customer support number our yeah bataye heavy load kyu bnd ho jata hai day time jb wapda bnd hoti hai and solar ki production bhi sae hoti hai

[@crownmicrocustomercare]

Contact us on WhatsApp support

[@jahanzabbaloch234]

Brother apka issue solve hua??

[@fareedkamran]

Assalam-o-Alecum I am using Crown 6KW Hybrid Inverter 10 Panels 555 Watts Per Pannel 4 Tabular Batteries TA-1800 12V 185 AH I am struggling with its Settings, After Sunset, it start charging batteries very late when backup is about to end. So in case If Wapda/Utility Light Off for long time in the evening/ night, after some time we stop getting output from Inverter/ Batteries due to low batteries. Can you please point me the right program number (In User Manual) and Right settings, so that it start charging batteries well before time. Thanks.

[@crownmicrocustomercare]

Watch video of Elego 6 Hybrid Inverter settings overview

[@naqashkhalid1334]

Ye generator k sath connect hta hai?

[@crownmicrocustomercare]

Yes but frequency should be proper.

[@naqashkhalid1334]

@@crownmicrocustomercare kitni frequency hti hai inverter ki frequency kitni krni pry ge

[@abdullahumer1683]

Ye setting app main kahan hai?

[@crownmicrocustomercare]

Dual output settings is not available in app for elego 6

[@naqashkhalid1334]

Agr l1 k losd ki battery acid wali ko sbu mode on kr k 4 hours tk chlana hai load and bki ki battery load shessing k ly save krni ho light mode k ly tu konsi setting krni ho ge

[@crownmicrocustomercare]

Contact us on our WhatsApp support

[@naqashkhalid1334]

@@crownmicrocustomercare number kia hai support ka

[@adnanmuazzam]

My Question in other words is: You mentioned about setting of low cuttoff voltage of L2 (by the setting number 60 of Elego6) but not mentioned about the high voltage when L2 out to get On again...

[@crownmicrocustomercare]

When any input source will available it will automatically turn on

[@adnanmuazzam]

​​@@crownmicrocustomercare But what I faced actually is that solar became available later and started charging the battery till more than floating voltage level but still less than the bulk voltage, but it didn't get on unless I switched wapda supply on... I am unable to understand the reason of this.., and this is the reason or background of my yesterday question..

[@munawarshahid2195]

@@crownmicrocustomercare No sir i think this is no correct my heavy load off in night at what battery level set but morning i get 4500 solar generation but still heavy load off and when i connect wapda it on I need solution that if solar generation is 4500 then why heavy load still off Please help

[@Lifewithtosif]

​@@munawarshahid2195sir what is the solution.. i am facing same problem

[@mohammadhammadansari1340]

Sir me without battery use kr raha hu freeser on krta he trip ho jata ha inverter or Ac run krta he ayesa kyou

[@crownmicrocustomercare]

Contact with us on WhatsApp support

[@sherazmalik582]

@@crownmicrocustomercare customer support number dy heavy load kyu band ho jata hai day time jb wapda jati hai solar ki production bhi full hoti hai

[@abdulkabirrana8823]

L2 completely cutt off ni ho ra us k lia kya karain

[@crownmicrocustomercare]

Which kind of problem you are facing please share with us on WhatsApp support.

[@AftabKhan-kj5iv]

میں کراون مائیکرو 6 کیلوواٹ انورٹر استعمال کررہا ہوں تو اسمیں ایسا سِٹنگ ہے کہ سورج ڈھلنے کے بعد ہی بیٹری سمارٹ لوڈ کیلئے بیک اپ پہ شروع ہوجائے اور ہیوی لوڈ کیلئے سسٹم یوٹیلٹی استعمال کریں۔ پھر بیٹری ختم ہونے پر سمارٹ لوڈبھی یوتیلٹی پہ کنورٹ ہوجائے تو ایسا کوئی سٹنگ اگر ہو تو برائے کرم رہنمائی فرمائیں۔

[@crownmicrocustomercare]

You can customize heavy load on battery voltage when battery voltage reach on its limit it will turn off

[@abdulwali4518]

do you mean heavy load by second output?...

[@crownmicrocustomercare]

Yes sir

[@noorelectrician7580]

Sir mujay ye btaye smart load ko mainay bilkul just wafda or solar pr chalana a battery SA bilkul nai chalana a to ma settings ma Kita Volt select Karo DC cut off ma

[@naqashkhalid1334]

Bht tang kr rha hai inverter Elego 60 number pr mene 46 rakha hwa hai or 14 use hai lakin abi battery 50 se b zada ho tu l2 bnd ho jati hai

[@crownmicrocustomercare]

Share your inverter video on our WhatsApp support.

[@jamshedkhurram1760]

Same problem with my inverter. L2 goes off as soon as Wapda goes off. Did you find the solution?

[@naqashkhalid1334]

@@jamshedkhurram1760 no else restart the inverter

[@jamshedkhurram1760]

@@naqashkhalid1334 from the on off button? Ya phr solar or battery ko band kr dun or automatic band ho jay

[@naqashkhalid1334]

@@jamshedkhurram1760 yes solar vattery wapda ko bnd kr k

[@naqashkhalid1334]

Agr wapda cut off ho jy tu din k waqt b smart load ni chl rha battery b attach hn koi setting hai iski?

[@crownmicrocustomercare]

Second output load is depends on battery voltage

[@samihayat8686]

System ku complete power off kr k dobara on kren issue solve hu jai ga

[@jamshedkhurram1760]

@@samihayat8686complete power off sy kia murad hy? Should I remove battery, solar and wapda input of solar?

[@azikhan7867]

Salam bhai heavy load cutt off ho raha hy har 15 .30 min bad

[@crownmicrocustomercare]

Heavy load is depends on battery voltage, contact on WhatsApp support.

[@azikhan7867]

Wants app no dy bahi

[@azikhan7867]

Contact no plese

[@azikhan7867]

Contac No please

[@Lifewithtosif]

Sir when wapda not available on day time and solar is available why my heavy load not on l, on solar. Even solar generate more power for my heavy load

[@crownmicrocustomercare]

Contact on WhatsApp support

[@sadaqatkhan4375]

Whatsapp number kia hai

[@mianzulfiqar4632]

Same problem .

[@sadaqatkhan4375]

@@mianzulfiqar4632 bro mujhe solution mil gia hai

[@sadaqatkhan4375]

@@mianzulfiqar4632 inverter and All the breaker turn off for 10 min the problem will resolve automatically

[@AbbasKhan27872]

Bohat hi gatiya invertor hai ager peisay lga k zalil hona hai to yeh invertor lay ly bakwas elgi crown our after sales service zero hai untrained staff hai

[@crownmicrocustomercare]

Your complain is value able for us, please tell from where you have face a difficulty in our service.

[@ijaztariq2541]

I spent 4 days on crown inverter 6kw configuration but failed