FYI they probably keep sending the skin colored resin, because it apparently gives the best details. The 3D printing nerd had this mentioned in a interview a couple of videos back.
@Flying0Dismount4 жыл бұрын
The filters over camera sensors are for INFRARED, not UV, so you made you camera better for night and low light, but did not change the UV response (which isn't that great anyways)
@wileecoyoti4 жыл бұрын
They're really both, or at least that one was. Can probably put it in the way of the spectrometer in the near future to show what wavelengths that particular one was if you're interested
@Flying0Dismount4 жыл бұрын
@@wileecoyoti The UV cut is normally just the natural property of the cheap glass substrate they used vs an intentional effect. CCD and CMOS sensors are not normally affected much by UV, but IR can cause many adverse effects for regular color imaging (The datasheets I have for the Sony sensors show most of them cutting off pretty sharply below about 400nm (mainly due to the RGB Bayer filter, but the raw sensor is not much better) but having a long tail well into the infrared range; also Google for the saga of the old Nikon D2H camera- great camera for its generation, but suffered from some weird image quality issues that were eventually traced to a weak IR filter on the sensor. These issues all disappeared with the installation of an external IR cut filter on the lens as well.)
@zabnat4 жыл бұрын
Now I just need to wait for any reports if that array problem the previous pro had also appear here or any other such a deal breaker defect. Then I'm gonna pull the trigger and get order one.
@yomboprime3 жыл бұрын
Hi! I just subscribed. To see better the UV pattern, place a white A4 paper on the screen, it will diffuse the light. The previous version shows a pattern, but the 2 Pro is uniform.
@beachboardfan95444 жыл бұрын
Could you extend the z height on a machine like this, hardware wise obviously could be done, but would the software work with a larger z?
@jeffkthompson4 жыл бұрын
“Skin color”? What year is this?
@christianbowes79073 жыл бұрын
Grow tf up
@TwoDogsFighting4 жыл бұрын
Any idea what profile extrusion theyre using for the z axis?
@goforbrokefilmstudios4 жыл бұрын
Nice review! I emailed you a suggestion for a way to upgrade it. :-)
@EvgenyZakharov4 жыл бұрын
How do you want to use it with so small work area?
@BrunoBostick3 жыл бұрын
top video
@eugenezagidullin48933 жыл бұрын
Hot glue everywhere
@bilibubule4 жыл бұрын
is there any brand that make printer like anycubik and elegoo but with bigger screens and bigger screen resolution ?
@molitovv4 жыл бұрын
Elegoo Saturn is pretty big and high resolution, how big do you want?
@EcoMouseChannel4 жыл бұрын
I have a 13.3" 4k mono panel on order from a manufacturer, I only paid $360 for it. Couple that with a larger back light array panel, you can basically make your own "larger resin printer" based off any of the smaller budget ones on the market. I'm using the internal components from a Longer 30. The hardest part for me to source is a resin tank.
@slipperyjack0074 жыл бұрын
Phrozen!
@HappilyHomicidalHooligan4 жыл бұрын
2:15 OBJECTION!!! It's NOT Blood Red!!! It's MARS Red!!!