Learn to weld pipes from income E6010

[@rubenbarria1557]

Tremenda tecnica para soldar!! Muy bueno!!! Feliz navidad Elosta!!

[@drumtwo4seven]

Welding pipe from the inside, that's trippy

[@christianalegre9809]

Muy feliz navidad 🎄 desde buenos aires argentina 🇦🇷 . Muy bueno el proceso de raíz y relleno con 7018

[@ManuelJimenez-ki5bv]

Saludos maestro buena tecnica

[@basimsaeed3696]

تحية طيبة. . ليش الالكترود احمر .

[@Mestnij-d5u]

100% ваши руки ростут не из жопы. 👍

[@romanromanov538]

Салам.Крассиво вариш только не показываеш на каком токе и диаметр электрода.

[@mahesakaryamk]

Jerja yang sangat bagus 👍

[@thebabylon2933]

عمل عظيم

[@raxmatovbekzod4885]

Lezgov❤

[@mubarakmuhammad1701]

Which type electrode is this?

[@luillierstephane1463]

6010 for the root pass, then 7018 for filling and capping, great combination. 6011 will make an excellent job too for the root pass, plus it's a bit easier to work with than the 6010.

[@ykcajkom687]

@@luillierstephane1463 what difference in 6010 and 6013? haven't use 6010 before

[@luillierstephane1463]

@@ykcajkom687 6010 and 6011are cellulosic coated rods, 6013 is a rutile coated one. 6010 and 6011 have better penetration in the root and work much better on a not perfectly clean base metal. Plus they have better mechanical properties and allow to use a slightly lower welding current than others, which reduce the thermal affected zone. However, not all welding machines can properly weld with those rods. You need a OCV at least 85 volts and to set correctly arc force parameter to get good results.

[@premjiahir472]

Good work👍👍 i am also have thi type welding channel plz support 🙏