ELRS Tx Rx "SECRET" Hardware Tab CYCLONE ELRS 7CH PWM JSON Files

  Рет қаралды 2,431

1nformatica

1nformatica

8 ай бұрын

Did you know you can view details about the hardware of your ELRS receiver and transmitter?
No? Well I will show you how to view the "hardware" tab and show how to modify it.
🔗 Please tell me if any of the links provided no longer work!!
🛒 CYCLONE ELRS 2.4G PWM 6CH / 7CH CRSF Receiver www.aliexpress.com/item/10050...
🔗 7CH & CRSF JSON files : drive.google.com/file/d/1VlCS...
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from s.click.aliexpress.com/e/_APpCVa You can help me by using this link!
👍 Follow on Facebook / 1nformatica
💲 If you would like to buy me a coffee: www.paypal.me/1nformatica
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica

Пікірлер: 68
@tinaschulz3514
@tinaschulz3514 Ай бұрын
Thank you for the video and the files. Now my Cyclone is in 7ch mode :) However I wonder how to update the FW with ExpressLRS Configurator.
@1nformatica
@1nformatica Ай бұрын
As you know the "Generic" target has been removed from the configurator. However, I have successfully flashed version 3.2.0 by using the Happymodel EPW6 target. Of course the json file still works as before. Thanks for watching, have a great day!
@tinaschulz3514
@tinaschulz3514 Ай бұрын
@@1nformatica Oh that is great info, thanks a million for that. That saves switching from 1.5.5 to 1.6.1 of the ExpressLRS Configurator :) The only thing I have now is that the Happymodel EPW6 firmware made with 1.6.1 has a bin.gz ending, I guess it needs to be extracted and then the firmware.bin uploaded via the web interface, isn't that right?
@1nformatica
@1nformatica Ай бұрын
@@tinaschulz3514 You're welcome! It is a lot easier just to configure the Rx to your local network and flash via wifi. I believe you leave the file as .bin.gz if you do it your way. Have a great day!!
@Cre8ionz.
@Cre8ionz. Ай бұрын
@@1nformatica yess you need to upload the "firmware.bin.gz" bc the bin file itself is too big. Error message appears: "ERROR[4]: Not Enough Space"
@1nformatica
@1nformatica Ай бұрын
@@Cre8ionz. Thanks for the confirmation. Have a great day!
@dayworkhard
@dayworkhard 3 ай бұрын
Thanks for sharing. Before I viewed your video, I did this to make it work. on latest ELRS configurator 1.6.1. select release 3.3.2, target: Generic targets used as a base 2.4Ghz, Device: Generic ESP8285 6xPWM 2.4Ghz RX. Select UART or WIFI and Flash it. Then go to receiver wifi: 10.0.0.1/hardware.html, find "pwm_outputs", add number 16 to make it look like: "pwm_outputs":[0,1,3,9,10,5,16] . Reboot, that's all.
@1nformatica
@1nformatica 2 ай бұрын
Yes, the JSON files are not really necessary, if you are careful!! Thanks for watching, have a great day!
@cloudbase81
@cloudbase81 6 ай бұрын
thanks @1nformatica , that was a great help! With your instructions i was able to activate Channel 7 and afterwards flashing it to the latest ELRS version with my bindingphrase etc. Works great, also the Vbat works directly connected to the two pins, tested with a 3s Lipo, for a correct readingt i had to set RATIO to 18.7 and OFFSET to -0.04 , however, now its a great receiver. Thx a lot
@1nformatica
@1nformatica 6 ай бұрын
You're welcome! Have a great day!!
@MCsCreations
@MCsCreations 8 ай бұрын
Wow... That's really curious indeed! I've never seen something like that! 😮 Thanks for the video, my friend! 😊 Stay safe there with your family! 🖖😊
@1nformatica
@1nformatica 8 ай бұрын
Thanks Mario! A solution to yet another Chinese puzzle!!
@Mindauxx
@Mindauxx 7 ай бұрын
Thank you so much! Just got these receivers, went through similar jour ey, testing adc port from 2xAA up to 4s, increasing by 1 volt and fearing that I will fry it. You also answered my other questions. Thank you! There is a lack of specifications on this thing on sellers page.
@1nformatica
@1nformatica 7 ай бұрын
You're welcome! Have a great day!!
@REDhlg
@REDhlg 3 ай бұрын
Fantastic sluthing! I just added ",16" to the pwm channel list in the hardware tab and it worked great... didn't need to mess with the .json file at all! I'm curious if the other RXs have a hardware tab?
@1nformatica
@1nformatica 3 ай бұрын
Hey thanks! Yes, the .JSON files are not really necessary, they just prevent you from accidentally changing something you shouldn't and bricking your Rx! Also yes all Rx's and Tx's have the hardware tab, it's used by ELRS devs. Have a great day!
@theoztreecrasher2647
@theoztreecrasher2647 8 ай бұрын
That's great M'lud. Uurrhh, do you think if we brought our TX12S Mk2 ELRS radio around (and a case of Guinness)you might knock a couple of those receivers over for us? 🤔😜🤣🤣
@1nformatica
@1nformatica 8 ай бұрын
Sure, no worries!! Here in the parched desert of Andalucía I'd do anything for a cold Guiness!! Thanks for watching, have a great day!
@dgfpv1988
@dgfpv1988 4 ай бұрын
it does not show me the link from google drive. a friend just gave it to me but it is not visible to me
@eme4289
@eme4289 6 ай бұрын
Great Video. I would like to use this receiver in an rc car with the new Mt12 radio. My question is that since ch7 pin can be used for ws2812 led's, how would I do that? I dont need more than the 6 channels and would love to use the led pin to control led colors for white headlights and red brakelights, and if possible yellow turn signals when the steering is turned. Any help is appreciated. Thanks
@1nformatica
@1nformatica 6 ай бұрын
My initial thoughts are that it would be possible to use WS2812 leds for static things like the headlights and tail lights but you cannot turn them off or change them via the transmitter. I will look into this. I have another project where I controlled leds from a spare channel (PWM) on the Rx using an Arduino nano, if programming is your thing you could modify it : kzbin.info/www/bejne/jHmXgXlpqsmNjcU
@ChrisCroft77
@ChrisCroft77 3 ай бұрын
I just ordered one of these as I neeed 7 channels for my car's lights setup. Do you know if these settings get changed back to 6 channels when update to new firmware version?
@1nformatica
@1nformatica 3 ай бұрын
If you put new ELRS firmware you must use the PWM 6 Ch version then in the hardware tab make the changes for 7 CH either manually or using the JSON file. Thanks for watching, have a great day!
@cfusername
@cfusername 5 ай бұрын
This is very helpful and interesting! So basically the Generic ESP8285 6-Channel firmware target will work, but without further modifications only without the 7th "LED" channel? I did the same exact thing trying the 7 Channel firmware. Will recover it tomorrow and try again with the 6 channel firmware.
@1nformatica
@1nformatica 5 ай бұрын
Yes, using the 6 channel firmware is the "trick". Out of interest I have tried to use the LED function putting a WS2812 RGB LED on the pin but none of the settings make it light. I wonder if anyone has got that to work?
@cfusername
@cfusername 5 ай бұрын
@@1nformatica Interestingly, when connecting the receiver to the serial USB interface, the receiver started successfully into WiFi mode (without delay) and I simply could upload the the 6 channel software without actually using the serial connection at all. Comparing the JSON with the configuration, the LED pin being in the PWM list was the only difference indeed. I decided to keep the stock configuration of the firmware since I don't need the 7th PWM channel at the moment.
@1nformatica
@1nformatica 5 ай бұрын
@@cfusername Glad you have it working. When flashed with the 7 CH firmware it does some very strange things!! Happy New Year!
@artem56881
@artem56881 7 ай бұрын
haha i got this rx couple days ago and had absolutely same journey...
@1nformatica
@1nformatica 7 ай бұрын
Don't you just love Chinese puzzles!! Thanks for watching, have a great day!
@juanicotenajulen
@juanicotenajulen 22 күн бұрын
hello were can i find the original firmware file for the cyclone 2400 pwmp rx?
@1nformatica
@1nformatica 22 күн бұрын
Short answer, you can't! Long answer, the "original" firmware was based on the "Generic ESP8285 6xPWM 2.4Ghz RX". Since the ExpressLRS devs have decided to remove this target from the configurator it is no longer possible to build firmware for this Rx. I have successfully used the Happymodel EPW6 target. Configuring the 7th channel can be done with the "JSON" file as before. Thanks for watching, have a great day!
@juliovolando
@juliovolando 11 күн бұрын
Hola amigo quisira el archivo para 7pwm pero el enlace qu8e pone baidu no permite registro e extranjeros tu lo podrias pasar? dese ya muchas gracias
@1nformatica
@1nformatica 11 күн бұрын
Hola, Hay enlaces en el vídeo descripción. Un saludo desde Andalucia.
@juliovolando
@juliovolando 11 күн бұрын
Hello friend, I would like the file for 7pwm but the link that says baidu does not allow foreigners to register, could you pass it on? thank you very much
@1nformatica
@1nformatica 10 күн бұрын
drive.google.com/file/d/1VlCShq8hUUtPatXYvEwJ6bMc0LfcUQTq/view
@duaneweatherford
@duaneweatherford 7 ай бұрын
Thank you for making this. I am having the same problem. The fix is not intuitive from the seller page.
@1nformatica
@1nformatica 7 ай бұрын
You're welcome! Hope it works for you now. Have a great day!
@duaneweatherford
@duaneweatherford 7 ай бұрын
Also it was bit hard to find this video when I had this problem. Maybe add Clyclone and PWM to the title.
@1nformatica
@1nformatica 7 ай бұрын
@@duaneweatherford Great idea! Sorted!
@yuriyboyun2932
@yuriyboyun2932 7 ай бұрын
I'm at the start of the journey. Which voltage should I choose to power it up?
@1nformatica
@1nformatica 7 ай бұрын
As with most receivers 5 volts is the preferred voltage. The receiver will work from 4 to 9 volts. Thanks for watching, have a great day!
@petrivatov6748
@petrivatov6748 7 ай бұрын
Thanks. Which pins do you use for power supply? Because I have problem with receiver after flashing. Wifi configuration mode works unreliable it restarts before I can load configuration file in hardware tab
@1nformatica
@1nformatica 7 ай бұрын
@@petrivatov6748 I normally use power from a BEC enabled ESC on channel 3. Note that you MUST use the 6 Channel firmware as I explain here : kzbin.info/www/bejne/aIe9k2OklKyShsk If you flash the 7 channel fw then the status LED will flash like it is wifi mode but you will not see any wifi signal. At this point all you can do is to flash 6 Channel fw via an "ftdi" adapter over USB. Thanks for watching, have a great day!
@petrivatov6748
@petrivatov6748 7 ай бұрын
Yes I flashed 6ch firmware but when I connect to wifi it restarts thr receiver
@1nformatica
@1nformatica 7 ай бұрын
@@petrivatov6748 That is very strange, I have not seen that. I find wifi works more reliably when connected to my local network, did you try that?
@marcelofarinon
@marcelofarinon 7 ай бұрын
Thanks...but looks like they removed the link with the file. Any chance to send to me?
@1nformatica
@1nformatica 7 ай бұрын
Sorry, here it is : drive.google.com/file/d/1VlCShq8hUUtPatXYvEwJ6bMc0LfcUQTq/view?usp=sharing I've been having a lot of problems recently with Google restricting files saying they are in violation of some "rule"!!
@user-dg3vq5yi1n
@user-dg3vq5yi1n 2 ай бұрын
напряжение питания приемника до 4-9V DC?
@1nformatica
@1nformatica 2 ай бұрын
Я думаю, что диапазон напряжения составляет от 4 до 6 вольт. Спасибо за просмотр, хорошего дня!
@dgfpv1988
@dgfpv1988 4 ай бұрын
can you help me download the firmware i cant register to baidu and get the .json files...
@1nformatica
@1nformatica 4 ай бұрын
I provided a link to the files in the video description. Thanks for watching, have a great day!
@dgfpv1988
@dgfpv1988 4 ай бұрын
@@1nformatica i just changed youtube language to english and it showed up thx for sharing! had no baidu account
@1nformatica
@1nformatica 4 ай бұрын
@@dgfpv1988 You're welcome! Have a great day!!
@artem56881
@artem56881 7 ай бұрын
you said early recievers had adc pin but label says that your rx has adc pin as well
@1nformatica
@1nformatica 7 ай бұрын
Yes, but this adc pin has a voltage divider so it can measure up to 36 volts, not 3.3v!!
@1nformatica
@1nformatica 7 ай бұрын
BTW what I do is to take a "Dupont" lead and solder it to the adc input then plug it into the balance connector. Search for new sensors in telemetry and you see Rx voltage which is the battery pack.
@artem56881
@artem56881 6 ай бұрын
@@1nformatica I've tested it and, is it okay that it shows about 0.7v higher than the actual voltage is? and how to fix this?
@1nformatica
@1nformatica 6 ай бұрын
@@artem56881 Normally it is much closer than that, usually within 0.1 volts. Calibration can be done on your transmitter or you can use the "offset" and "scale" parameters under "VBat" on the hardware page.
@patriciohernandezsegura5848
@patriciohernandezsegura5848 4 ай бұрын
Perdoname... pero no puedo descargarme esos archivos. me pudes decir donde conseguirlos? Gracias
@1nformatica
@1nformatica 4 ай бұрын
Hola, Puedes descargar aquí : drive.google.com/file/d/1VlCShq8hUUtPatXYvEwJ6bMc0LfcUQTq/view?usp=sharing Un saludo desde Andalucia.
@yanickboulanger2918
@yanickboulanger2918 29 күн бұрын
Bonjour, comment flasher le récepteur ? je n'arrive pas à le flasher en wifi ? Merci.
@1nformatica
@1nformatica 29 күн бұрын
Oui, vous pouvez flasher ce récepteur via wifi À condition de choisir la bonne cible qui doit être 6 canaux PWM. J'ai flashé le firmware 7 canaux qui a "briqué" le récepteur m'obligeant à utiliser un adaptateur FTDI pour le récupérer en utilisant le firmware 6CH. Merci d'avoir regardé, passez une bonne journée !
@yanickboulanger2918
@yanickboulanger2918 29 күн бұрын
Comment le repasser en 6 voies ?
@1nformatica
@1nformatica 29 күн бұрын
@@yanickboulanger2918 Comme vous le savez la cible "Générique" a été supprimée du configurateur. Cependant, j'ai réussi à flasher la version 3.2.0 en utilisant la cible Happymodel EPW6. Bien entendu, le fichier json fonctionne toujours comme avant.
@yanickboulanger2918
@yanickboulanger2918 29 күн бұрын
Ça ne fonctionne pas, j'ai déjà essayé.....le récepteur ne peux pas se connecter en wifi et quand je veux flasher avec le fichier "firmware.bin" ça me dit qu'il n'y a pas assez d'espace.... j'aimerais pourtant le flasher avec la dernière version
@1nformatica
@1nformatica 28 күн бұрын
@@yanickboulanger2918 Il y a 2 fichiers firmware.bin créés. l'un est en fait firmware.bin.gz et est compressé. Essayer de flasher firmware.bin entraînera l'erreur "pas assez d'espace". J'ai également essayé de flasher la dernière version 3.4.1 et cela a bloqué le Rx pour une raison quelconque. La dernière version qui fonctionne (pour moi) est la 3.3.2
Why You Should Always Help Others ❤️
00:40
Alan Chikin Chow
Рет қаралды 127 МЛН
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,7 МЛН
Sigma Girl Past #funny #sigma #viral
00:20
CRAZY GREAPA
Рет қаралды 7 МЛН
I’m just a kid 🥹🥰 LeoNata family #shorts
00:12
LeoNata Family
Рет қаралды 5 МЛН
7 Things You Need To Know About ExpressLRS PWM Receivers
20:27
Joshua Bardwell
Рет қаралды 23 М.
ExpressLRS telemetry explained
14:49
Painless360
Рет қаралды 14 М.
Intro to Hardware Reversing: Finding a UART and getting a shell
12:07
Tony Gambacorta
Рет қаралды 879 М.
Unlock the Potential of Your Old Hard Drives: Build a Drone Engine!
8:12
сюрприз
1:00
Capex0
Рет қаралды 1,5 МЛН
One To Three USB Convert
0:42
Edit Zone 1.8M views
Рет қаралды 441 М.
🔥Идеальный чехол для iPhone! 📱 #apple #iphone
0:36
Не шарю!
Рет қаралды 1,2 МЛН
ТОП-5 культовых телефонов‼️
1:00
Pedant.ru
Рет қаралды 20 М.
Iphone or nokia
0:15
rishton vines😇
Рет қаралды 1,8 МЛН
iPhone 12 socket cleaning #fixit
0:30
Tamar DB (mt)
Рет қаралды 45 МЛН