Emax E6 transmitter TX binding to the tiny hawk S in detail.

[@alessandrocalabro9807]

okay, after trying many things I've watched this video very calmly and thanks to you I managed to get the drone (emax tinyhawk) working again, at least it flies! Beeper mode still doesn't beep, when I arm it besides having the throttle all down the props won't spin and at first they seem not to be cordinated, as if some motors were a bit lazy, but as soon as you hit the throttle the drone goes up perfectly, seems ok for now. I also managed to put angle-horizon-acro on aux1 as you did but right now couldn't test their rates and all that, tomorrow i'll do some tests and see how well it goes. For now I can at least fly it and know that nothing is broken, it was just really messed up. I'm really lucky to have found your channel for such a specific thing, and I'm so glad I did; you put great info out there for us who are starting in this hobby and I can not thank you enough for that. I'll update you as soon as I can, again many many thanks for your effort, patience and kind responses :) Have a great day!

[@HoverJunkie]

Alessandro Calabro thank you so much for your kind word and support. If you can, please like and subscribe to help my channel. Thanks again and happy flying.

[@HoverJunkie]

Alessandro Calabro hope all is up and running smooth. Please like and subscribe if you haven’t yet. Please keep me up date. I appreciate the support.

[@alessandrocalabro9807]

@@HoverJunkie Hello Hover! everything except the beeper is working, and I think I've killed some 1s batteries by dropping them below 3,3V, any chance to recover them? I'm also looking into buying a controller (taranis qx-7) and start with velocidrone, combining it with some real flight with the tinyhawk. Thanks for your time and responses man, really appreciate it :) Have a nice day!

[@HoverJunkie]

Alessandro Calabro try putting setting to Nih to charge them for a few minutes then switch to Lipo to the remain of the charge. Let me find out about the beeper setting.

[@Savagemister]

With this controller, I can't change the stick configuration, right? Because when I go to that screen you are on at 16:40, my sticks are all messed up. My throttle is not only on the right stick, but it's left throttle down and right throttle up. Is there a way to fix this?

[@HoverJunkie]

Savage Mister no worries, go on the same page and go under channel map and make sure you in see in all caps TAER1234 that should fix it

[@HoverJunkie]

Savage Mister let me know if that works?

[@landonhager9631]

Hey was wondering about my freestyle 2. When I arm it the drone goes max speed in the air and won’t come down unless I unarm it. Need some help

[@HoverJunkie]

Can you go on beta and see the point number on the throttle?

[@HoverJunkie]

Did you get that fixed?

[@landonhager9631]

Well the flight controller was messed up, got a new one and it did the same thing. Turned out that when I crashed the propellers had came loose and I have to re tighten them

[@HoverJunkie]

@@landonhager9631 that’s interesting. Thanks for getting back to me about the findings

[@Nocoda7]

excellent video my friend I'm trying to bind my Emax tiny hawk 2 with the original controller still not flying ill watch the video a couple times Thank you!

[@HoverJunkie]

Lawrence Coleman thank you so much. Have you watch the first video? It has a link to the hex file you need to get it Bind.

[@heartpilotOB]

Following this...

[@mhond0filmz114]

Hi SIr I think Emax Ez Pilot is different from the controller you have in your videos, mine have no antenna it comes with Emax EZ pilot, just wondering if the controller is compatible with tinyhawk. thank you for the assistance

[@HoverJunkie]

Mhondo Thugs I just noticed that let me do some research and get back to you

[@HoverJunkie]

No it will not work with your controller

[@skydriver7448]

Hello buddy and thanks for the video. I have the same drone with the same remote controller and a mac. I can connect the drone to Beta, the remote control sends the signal to Beta and everything works, but I have two problems: 1) I can't arm the drone's motors and I don't understand the logic of setting the levers when you are on Motors. 2) My roll, pitch, yaw, throttle and aux 1 to 4 controls are totally reversed, how can I adjust them? The drone is new and has never been set up. A thousand thanks

[@HoverJunkie]

Hello my fellow pilot. First thing, go under modes and set aux on auto. Them move the switch you want to Assign to the mode. Ones that is set. You can grab the tab and move it right or let to reverse or set straight. For the the throttle, ailerons, throttle and yaw. Try re rewrite with this. TEAR 1234 or TAER 1234 on of this should work. Let me know

[@DavidLuchetti]

Would this also work on the Tinyhawk 2 race? I’ve been trying for a week to get my E6 TX to work with my TH2Race ... it seems to bind - there are warning messages in the FPV viewer and lights flash on the drone when i flip switches on the E6 ... but it won’t arm or fly

[@HoverJunkie]

No it will not work the same on the 2

[@tumbaofilms]

Hello, I just follow all your instruction but I can't bind controller E6 with my dron NANOHAWK, is there something different with the configuration that I am missing? I ask this because it is not a Tinyhawk

[@HoverJunkie]

Did you download the hex file?

[@tumbaofilms]

@@HoverJunkie​​⁠yes 4.0.0 is running. Dron and controller are in bind mode but it just doesn’t work the bind process, any suggestions? Thanks

[@HoverJunkie]

@@tumbaofilms do any lights change in color?

[@tumbaofilms]

@@HoverJunkie I turn on dron (red and blue lights shine), I put it on Bind mode (just blue light shine), I turn on controller just green light shine, I put in on bin mode (red and green light shine) after 15 seconds I turn off bind mode in the controller and then turn off controller, ,after this point the light in the dron doesn't change any more even with the controller turn off. When I turn off drone and then turn it starts shining again in red and blue no matter controller is on or off.

[@wesselwtb7960]

Nice video! My tinyhawk worked fine before but after using betaflight to connect to liftoff simulator i am having trouble binding with the controller. Could it be that using betaflight updated the software on the flightcontroller and that this is causing the binding issues? Will following the steps in this video work?

[@HoverJunkie]

If you follow this steps it will work. If it doesn’t then download the hex file on the other video

[@wesselwtb7960]

Hover Junkie does it work with tinyhawk 2 rtf?

[@HoverJunkie]

Wesselwtb your really shouldn’t have to do this. Because it has the software, how ever if you reset the software on beta it could or revert. So follow the previous video and download the hex file and follow the steps

[@bred1220]

I have bound it to the drone but I can’t turn on the motors I bound it to tinyhawk S

[@jasonsecretsword7606]

Can you change the transmitter between mode 1 and 2? If not does the Emax E6 come in a mode 1 config?

[@HoverJunkie]

Hello my pilot friend. Mode 2 come standard on the E6 and I will find out if it can find out of the mode 1 switch fir the E6. Stay tune. I’ll find out this week.

[@HoverJunkie]

Hello pilot, the E6 can’t be converted to mode 1 because its fixed according to Emax.

[@XUNSUNunavailable]

Hey brother, i'm trying to follow these directions, But when i set up the emax e6 transmitter on bind mode, the tinyhawk 2 receiver doesnt register as anything is trying to bind. I have also attempted binding using an frsky x-lite still no success. I'm set to "Spi RX support" and FRSKY_d. I could really use a hand!

[@guserickson8588]

I'm in the same boat. I've followed Hover Junkie's guide to a T and the manual. Neither are binding my Tinyhawk 2 to the Emax E6. This tinyhawk arrived in the mail today.

[@HoverJunkie]

Joseph Pav did you guys download the file I linked ?

[@HoverJunkie]

Joseph Pav sorry to hear that your having issues. Did you download the hex file? You need it to bind the E6 controller

[@HoverJunkie]

Joseph Pav let me know guys if I can be of more assistance.

[@guserickson8588]

I ended up initiating bind mode on the TH2 through the CLI in betaflight. I was able to finish binding almost immediately afterward.

[@BurgerurgerFPV]

My arm switch is on the left side but i want it on the right side how do i dangle the modes to how it should be

[@HoverJunkie]

Go under modes and select auxiliary auto, and move the switch you want it on.

[@HoverJunkie]

Drew Graham go to 22:40 on the video and it will show you. Let me know how it went.

[@felipeeugenio5331]

Question I have a tinyhawk freestyle 2..but I lost it in the woods I got it as a rtf. And now a order another one bnf do I need to download anything or can I just bind? Since its the same drone?? Thanks alot.im new to fpv

[@johnharris2683]

I'm trying to do the same thing now did you have any luck ?

[@felipeeugenio5331]

@@johnharris2683 im still waiting on the new tinyhawk freestyle 2 to come in the mail.

[@HoverJunkie]

Felipe Eugenio if you have the emax controller, yes you need to download the file.

[@HoverJunkie]

John Harris download the hex file.

[@aaronfisher7754]

I had a freestyle 2 rtf kit. I lost the drone. I then brought a tinyhawk2 bnf and I simply put drone and e6 into bind mode and it worked fine straight off the bat. But now weeks later I can't connect to drone or bind. It simply stopped working between battery packs

[@ivanblu8691]

Work also with tinyhawk freestyle??

[@HoverJunkie]

ivan blu yes it should work, the setting are different though.

[@HoverJunkie]

ivan blu yes it Can, settings are different though.

[@Mateusneww]

@@HoverJunkie please help me i am not able to connect too

[@Mateusneww]

please help me i am not able to connect too

[@HoverJunkie]

Mateus Castro no worries, what’s the issue. I know you said you can’t connect. To beta at all ? Or it won’t read your controller?

[@Gis_MW]

Is it possible to bind an E6 to a freestyle 1 without changing the receiver?

[@HoverJunkie]

This might help you. kzbin.info/www/bejne/pIixe5yOj9Ceoas

[@Gis_MW]

@@HoverJunkie That's version 2, is the 1st version the same?

[@HoverJunkie]

@@Gis_MW yes, as far as I know is the same. Frsky D8

[@Gis_MW]

@@HoverJunkie Should the CLI copy the E6 CLI settings?

[@Gis_MW]

helllllp

[@bob14072]

Awesome! Thank you very much for your help.

[@HoverJunkie]

bob14072 for sure. Please like and subscribe

[@jaybird1091]

@@HoverJunkie what happens if you hit boot button or vtx button on your drone if the battery is plugged in on drone?

[@HoverJunkie]

@@jaybird1091 if it’s plugged in first before you push boot button, nothing. The vtx button will just change your goggles channel.

[@Gis_MW]

Hi Tinyhawk Freestyle 1 and E6 remote controller won't bind, please help

[@HoverJunkie]

Did you replace the fc or the drone?

[@HoverJunkie]

Let me do some research

[@marsrover7838]

Hello my friend, I'm desperate.I have a Tinyhawk 2. The drone connected to "Betaflight". Entered the commands "set usb_hid_cdc = ON" via "Betaflight Configurator" and then "save". That worked too. Later I wanted to set the setting to "OFF". Now I get no connection to Tinyhawk. Can you help me here?

[@HoverJunkie]

So sorry my pilot friend fir the super late response. Please let me know if you still need help.

[@djilly75]

Can you bind the controller to an xm+

[@mhond0filmz114]

Mine managed to bind but the axis are all messed up other switches are ok any advise?

[@C_Haberstoked]

Hey i had a similar problem. check out this page: emaxmodel.com/blog/post/e6-rtf-radio-transmitter-arming-controls-binding-issues/

[@jonathanmcwhorter1353]

my controls are all backwards how can i change it?

[@HoverJunkie]

Jonathan Mcwhorter go on channel mapping and put TEAR . You may see AETR or something like that. Let me know?

[@jonathanmcwhorter1353]

@@HoverJunkie 🤘

[@HoverJunkie]

Jonathan Mcwhorter don’t forget to like and subscribe. I appreciate the support.

[@eduardomaia2154]

Does anyone know if the E6 transmitter works with other drones besides eMaxs? Thanks!

[@Zeph_Fpv]

No

[@wyattbuchinski9269]

Uhh the update firmware broke my drone and now it’s unusable without a full factory reset but I don’t have the correct files. I need the backup data from the factory

[@HoverJunkie]

Wyatt Buchinski sorry to hear that my friend. I will make a video just for you to restore the factory set up and with the right settings for the controller to be able to bind. Subscribe to be notified and for for get to ring the bell. Thanks

[@wyattbuchinski9269]

Hover Junkie That’s exactly what I need. Thanks!

[@amazonwarehouse7302]

Where to download the HEX files and Betaflight 4.0.0?

[@HoverJunkie]

Broken Crotales look at my previous video on this topic and downloaded from there. Let me know !

[@amazonwarehouse7302]

Hover Junkie When I try to download the HEX file I’m told that the file doesn’t have an app associated with it to download it. What am I missing?

[@HoverJunkie]

Broken Crotales I have a dumb file you can use for the cli on beta. It will help you. Please subscribe to be notified

[@Savagemister]

@@amazonwarehouse7302 This is what I ran into also.

[@amazonwarehouse7302]

Savage Mister let me know if you find a solution lmao I still haven’t bound it

[@tesimpamonami9188]

Hi, I try to Flash my Tinyhawk2 Freestyle with lastest Firmware "betaflight_4.2.2_STM32F411.hex", for some reason he doesn't like it. Did you have done yours yet?

[@HoverJunkie]

tesimpa monami are you using the Emax controller

[@tesimpamonami9188]

@@HoverJunkie Yes

[@HoverJunkie]

tesimpa monami you need to download the hex file linked below for the beta 4.0.0 in order for the Emax E6 controller to work.

[@tesimpamonami9188]

@@HoverJunkie where is the link?

[@HoverJunkie]

tesimpa monami not the freestyle one

[@Mateusneww]

can I connect the Emax E6 Transmitter with freestyle?

[@Mateusneww]

I'm not able to connect

[@HoverJunkie]

Mateus Castro let me do some research and I’ll get back to you

[@guserickson8588]

You should be able to. emaxusa2.freshdesk.com/support/solutions/articles/19000108268-tinyhawk-freestyle-e6-transmitter

[@bluelance01]

Will this work with the freestyle 2???

[@HoverJunkie]

No it will not. What’s wrong with your drone?

[@bluelance01]

Hover Junkie I just got the freestyle 2 , trying to bind it to this transmitter but can’t get it to bind. I was told you can bind multiple eMac drones to the transmitter, but can’t get it to work! 😆, driving me crazy!!!

[@HoverJunkie]

Lance Bonner go on beta and see what firmware edition you have

[@gabormihaly667]

Betaflight doesn't work. I have downloaded it several times.

[@jimmyk5644]

What about TH2

[@johnharris2683]

I bought an RTF kit just like this with a tiny Hawk 2 and I have another tiny Hawk 2 that I now have to do this with and will not just buy into it😪 GD FPV

[@HoverJunkie]

John Harris no worries, did you download the hex file i provided?

[@johnharris2683]

@@HoverJunkie not yet I bought a computer just for drones LOL but I haven't had a chance to work on it yet I've downloaded betaflight and that's about it I've never even used betaflight yet that's why the RTF system appeal to me so much