Embedded C programming - Obstacle Avoidance Robot

Embedded C programming - Obstacle Avoidance Robot
Link to project abstract(my blog): embeddedprojectsworld.blogspot...
embeddedprojectsworld.blogspot...
Link to Program & Schematic(Proteus) : drive.google.com/open?id=1p7W...
►Facebook: embeddedsystems.ravikira...
►Telegram: t.me/embeddedsystems_ravikira...

[@chodavadiyajaydip8937]

Excellent 👍👌

[@soroush4088]

Thank you, it was really helpful and well explained

[@embeddedsystems-bolla]

You are welcome..

[@rajutharigoppula2890]

Nice video

[@hant226]

thanks for your video. Can i ask you a question? Do i need to supply power for the 8051(connect battery to the vcc and gnd pin), because on proteus i cant see the gnd and vcc pin, also i use sr05 as ultrasonic sensor, do i also need to connect it with the battery too? Im being confused in the power supply for this robot. Sorry for this silly question, im really bad at electronic. thank you.

[@minkhantmaungmaung7534]

Much appreciate! You explained everything clearly. There is one question I would like to know is that how to add the program into real life robot? You showed only in diagram but I need to put it in the real life robot like you showed in your original.jpeg. Once again, thank you ^^

[@DushyantSingh-dt]

Hey i want to make a cnc number printing plotter machine, problem is that, when i want to print a number using stepper motors then i upload my Gerber file when it works, but when i want to change my printing number then again go to pc, and chnage the Gerber file then upload, my work is not so great, i just want to print some numbers using stepper motors. so Arundio IDE have any library to without using Gerber i change my number from keypad and display. or any library in AT89S52 for my work This is my collage project, please KZbin help me,

[@embeddedsystems-bolla]

Contact me @ m.me/embeddedsystems.ravikiranbolla

[@DushyantSingh-dt]

@@embeddedsystems-bolla i only use instagram sir @dushyantsingh.ds or whatsapp [phone]

[@muhammadluqman321]

can we replace pc817 with IR Sensor??

[@dhanushyadav800]

Is edge avoiding robot video available

[@abhiramias2085]

What are those blue things connected to the ir sensors?

[@embeddedsystems-bolla]

Hello, Those are logic states.. Used as switches to swich between 1 & 0.. You can use switches as well..

[@subhadeepdhang5920]

I think the gpio pins should be initialized to 1 , for taking inputs .

[@embeddedsystems-bolla]

For 8051 all the pins will be HIGH by default after power-on.. so not required for 8051 MC..

[@subhadeepdhang5920]

@@embeddedsystems-bolla Ok, thanks for this informative video series I've learnt a lot 😊

[@Sekhar_Home]

Too lengthy video...u shyd short the video and repeating word shud avoid