Embedding an object in Clear Resin

  Рет қаралды 411,301

Tiranti

Tiranti

Күн бұрын

Пікірлер: 163
@donnakolo1013
@donnakolo1013 3 жыл бұрын
I've had my horses' tooth for 40 years and want to make a necklace with this stuff. it's pretty: beige and dark chocolate. Nice design and shape to it.
@bigstackD
@bigstackD 7 жыл бұрын
Absolutely flawless 👍🏻👏🏻👏🏻👏🏻
@sirwilliam51
@sirwilliam51 6 жыл бұрын
I need to put 2 rolls of pennies in a block of resin for my greedy useless son to inherit so he can't contest my will.
@janettecoleman1714
@janettecoleman1714 5 жыл бұрын
Beautiful, love your thinking, good luck with that👍
@tiberiu_nicolae
@tiberiu_nicolae 5 жыл бұрын
@B A sometimes kids are awful too.
@billmatthias6229
@billmatthias6229 4 жыл бұрын
he cant anyway. My mother did that crap to me. My cousin still hooked me up... lol
@donnakolo1013
@donnakolo1013 3 жыл бұрын
Great idea!! Hahaaa.
@machinist7230
@machinist7230 Жыл бұрын
Or you can give him 30 pre 64 quarters. A bit pricey at 5-7 dollars each. But the idea of giving somebody "30 pieces of silver"
@opdawg817
@opdawg817 3 жыл бұрын
Pretty cool. What do you use to polish clear resin without scuffing it?
@PandaOrABear
@PandaOrABear 5 жыл бұрын
As someone who regularly buys and uses Tiranti Resins and Silicones. I implore and beg you to upload videos MORE AND REGULARLY. Starting with how to mix your T20 silicones with Catalysts ! Including the faster cast catalyst
@literallystingy2858
@literallystingy2858 3 жыл бұрын
lol he never uploaded again
@flippa_da_boss9998
@flippa_da_boss9998 2 жыл бұрын
@@literallystingy2858 fr pffft
@crystalmoore9214
@crystalmoore9214 2 жыл бұрын
Thanks for this, I was looking for the answer to my question and you just showed me my answer
@sarahda845
@sarahda845 6 жыл бұрын
Just bought the clear cast resin from tiranti lol and I find a tutorial for it, perfect
@Forgan_Mreeman
@Forgan_Mreeman 4 жыл бұрын
somehow i set my desk on fire
@MilesNelgez
@MilesNelgez 4 жыл бұрын
That's normal.
@OregonDARRYL
@OregonDARRYL 3 жыл бұрын
Pretty sure you're doing it wrong...
@syrisrodello6590
@syrisrodello6590 6 жыл бұрын
I made my first one and it turned out quite well. But, do you have a video on how to sand it down and polish it?
@ragingbull5883
@ragingbull5883 6 жыл бұрын
Star with coarse sand paper like 500, after trimming down rough edges, then work your way up to about 2000 grit and polish with a small buffing wheel on a dremel.
@SkiNNyPoNNy
@SkiNNyPoNNy 5 жыл бұрын
Syris Rodello dude you literally have the entire internet at your fingertips can u really not just make a quick search?
@jsngallery
@jsngallery 6 жыл бұрын
if you let the first layer dry too much or completely, then pour the second layer on top, any idea if this will result in a “line” between the layers?
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
Nope
@fifikubesh6047
@fifikubesh6047 2 жыл бұрын
In glass yes
@markanthonyizzo6487
@markanthonyizzo6487 6 жыл бұрын
Recomendation for covering a 3 year old big mac that has sentimental reasons for preserving. Do they make bigger molds? Thank you
@dandavid513
@dandavid513 6 жыл бұрын
You make the mold yourself with silicon. If you want that big of a mold I recommend wrapping a brick in clear packing tape and pouring the silicone over that
@abrarSalehS
@abrarSalehS 4 жыл бұрын
Great video. Can one undo the process and break the resin to retrieve whatever was embedded inside?
@samottenbreit4073
@samottenbreit4073 4 жыл бұрын
I suppose that depends on how fragile the object inside is, if it is easily breakable good luck but the metal dog in the video yeah you can cut into the resin, might be difficult
@hansdegroot8549
@hansdegroot8549 6 жыл бұрын
Perfect tutorial. Thanks for sharing.
@jonscobey677
@jonscobey677 Жыл бұрын
What product do you suggest and can it be purchased in small quantities? This project is just what I want. I’d hire it to be done but haven’t found any one to do it.
@TeeRql
@TeeRql 4 жыл бұрын
in the event you want that object removed from the resin; is there a way to break it open and the item be undamaged? great tutorial by the way, short & straight to the point 👏🏾
@mickeyromeo
@mickeyromeo 4 жыл бұрын
good luck with that!
@indiaroberts6012
@indiaroberts6012 6 жыл бұрын
What are the names of the products used.. everything I see takes 24 hours to harden
@kombizz
@kombizz 5 жыл бұрын
The calm music make you sleepy !
@jeanninemorelli-cary927
@jeanninemorelli-cary927 4 жыл бұрын
Can you put fabric in resin? What is the life expectancy of resin jewelry? What will it look like in 20 years? Thanks
@WayIntoAdventures
@WayIntoAdventures 2 жыл бұрын
That came out so nice! I got a piece of the turf/grass from Parc Des Princes this week and want to do something like this. Do you think it will work?
@circuit-maker7971
@circuit-maker7971 7 жыл бұрын
What is this "pressure pot" you're talking about? I'd love to know more about that and how to keep bubbles out of the mold. Thank you for the video, beautiful stuff you're making here!
@TirantiUk
@TirantiUk 7 жыл бұрын
Pressure pots can be used to make air bubbles decrease in size to hide them, vacuum chambers can be used to expand the air so that it escapes the material entirely giving you a completley bubble free material. mix slowly and carefully and you should avoid most air bubble problems.
@prayingelephants
@prayingelephants 5 жыл бұрын
What if i want to create a resin object which is partially embedded, but partially not ? like sticking out of the resin if that makes sense
@nyct0phile
@nyct0phile 4 жыл бұрын
probably fill your mold halfway, let completely dry, and then put your object in place so its sticking out and fill the rest
@Q80vaper
@Q80vaper 6 жыл бұрын
Best video ever thanks pal
@herculanolemos4925
@herculanolemos4925 7 жыл бұрын
wow...very nice...
@Andrasta_Divine
@Andrasta_Divine 10 ай бұрын
Is there anyway to remove the resin from the stones? I have been given some and i want to see the gems without the resin
@amigacherished5002
@amigacherished5002 7 жыл бұрын
good video how do you Polish and Finnish it?
@EjinnoVin
@EjinnoVin 5 жыл бұрын
Where can i get the silicone mold?
@bluepacman13
@bluepacman13 5 жыл бұрын
If I'm using an acrylic bowl, how would I go about demolding? Is there a demolding agent I can use for acrylic? some suggestions were packing tape or Vaselene.
@Fearyourown
@Fearyourown 4 жыл бұрын
Bluepacman13 Vaseline works fine
@Rusty_Gold85
@Rusty_Gold85 5 жыл бұрын
Spirit level so the bench is level
@DanijelMaodus
@DanijelMaodus 8 жыл бұрын
Great video and cool music, could you tell me who composed it?
@TirantiUk
@TirantiUk 8 жыл бұрын
Music is credited at the end. Song: Ukesounds by: Airtone used under Creative commons attribution license and found on ccmixter.org/
@embracedbyree
@embracedbyree 5 жыл бұрын
Where can I get the mold from
@chehsin
@chehsin 7 жыл бұрын
EXACTLY what i was looking for! thank you!
@sachin0487
@sachin0487 3 жыл бұрын
Thanks for the video. Is it possible to do the same for bigger objects? Say if it's 10cm thick?
@gregorr.6953
@gregorr.6953 7 жыл бұрын
woud this work with a painted minature?
@wxman5401
@wxman5401 6 жыл бұрын
This guy did it with painted 1:350 aircraft miniatures kzbin.info/www/bejne/bpnZmWWXnNp4b5Y
@Emz-93
@Emz-93 6 жыл бұрын
can you do one for hair- like how to set hair into resin thank you
@mickeyromeo
@mickeyromeo 4 жыл бұрын
use fake hair
@BillieFingers
@BillieFingers 6 жыл бұрын
Is it sad that I'm loving the music?
@ksportz66
@ksportz66 3 жыл бұрын
could you do a dried up leaf in this way ?
@klee88029
@klee88029 6 жыл бұрын
Excellent instructional. TY.
@mrajinj661
@mrajinj661 2 жыл бұрын
what type of resin and hardener are you using?
@bygamy06
@bygamy06 4 жыл бұрын
But what if my object is heavyer? It wont go to deep in the first layer? I want to cast an tattoo machine and is pretty heavy
@a4channoob
@a4channoob 6 жыл бұрын
do you recommend a resin that is as clear as possible but good at resisting UV?
@MultiTom1956
@MultiTom1956 7 жыл бұрын
Very nicely explained:-) The mold handmade or purchased from a store? thank you!
@TirantiUk
@TirantiUk 7 жыл бұрын
It is handmade using a silicone rubber, a ready made plastic mould woudl also work.
@steverossiter8796
@steverossiter8796 3 жыл бұрын
Where can I find larger molds? I want to make one that I can put hot wheels in.
@literallystingy2858
@literallystingy2858 3 жыл бұрын
you can buy them anywhere really
@JO-qz2ke
@JO-qz2ke 6 жыл бұрын
question: im looking for somthing to cast in a lightbulb to make a custom shift nob, when dryed is this a hard consitancy or is it silicone like?
@Trahan.400
@Trahan.400 9 ай бұрын
I know this comment is 5 years old, but I’m making a custom shift knob out of an energy drink can with epoxy. Can you explain how you did yours and how it turned out?
@JO-qz2ke
@JO-qz2ke 9 ай бұрын
@@Trahan.400 hello, I used a random epoxy I found at a store ( make sure it hardens hard) and i left a bolt with the correct pitch and thread and it worked and turned out okay, all depends how much time u spend to make sure the bolt is straight and the epoxy hardens all the way. hope this helps!
@Michelle_Vargo_
@Michelle_Vargo_ 7 жыл бұрын
What material is the mold made from?
@TirantiUk
@TirantiUk 7 жыл бұрын
Silicone Rubber
@balakrishnanmanakkaparambi1490
@balakrishnanmanakkaparambi1490 5 жыл бұрын
From where can I buy this product please give me the link I am from India
@nikkimagnusson9437
@nikkimagnusson9437 5 ай бұрын
Where to purchase in U.S. ?
@sylvestremqeku5288
@sylvestremqeku5288 5 жыл бұрын
The resin left in the cup after pouring the first half, why has it not hardened?
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
Its a different mix
@Ranger42
@Ranger42 5 жыл бұрын
How can the object be removed if one makes a mistake and wanted to add something else to the display
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
Hammer
@ali_shoma2745
@ali_shoma2745 6 жыл бұрын
I have no experience with resin. I want to surprise a friend with a mini trumpet in clear resin. I was wondering if I could use a wine glass and leave the resin in glass permanently. Please help me if you know the answer.
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
Whats the question
@miamonroe4431
@miamonroe4431 5 жыл бұрын
I would say so. I am assuming you could use the wine glass as your mold but leave it in there. I like that idea. @@jonathanjones7044
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
@@miamonroe4431 it might work, the thing with most resins is that it will shrink while setting. A resin that does shrink will not work in your case. Maybe do some research into brands of resin to see if any dont shrink at all.
@tomoneill1045
@tomoneill1045 3 жыл бұрын
Very good
@ptlofts
@ptlofts 7 жыл бұрын
If you do that to, lets say, an apple, will the apple rot after some time or will remain intact? Thanks.
@TirantiUk
@TirantiUk 7 жыл бұрын
Organic material can be tricky, the moisture may prevent the resin from setting properly, even if successful there is a risk that it will rot and crack the resin, general advise with organics is to partially dry first.
@roteroktober360
@roteroktober360 7 жыл бұрын
can you drill through the resin in order to put it on a necklace?
@TirantiUk
@TirantiUk 7 жыл бұрын
Yes, drill slowly or the resin may melt/burn.
@andrewquigley1123
@andrewquigley1123 2 жыл бұрын
What is the name of this resin please
@hillbillyslayer7513
@hillbillyslayer7513 6 жыл бұрын
What kind of resin did you use and did you have to use a pressure pot
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
Says in the video and no pressure pot ( thats why he was careful of not making bubbles )
@tiberiu_nicolae
@tiberiu_nicolae 5 жыл бұрын
Did you not see the label on the container in the first 20 seconds of the video? How are you even alive???
@3rdsty
@3rdsty 4 жыл бұрын
hi do you ship to USA?
@pamcullen537
@pamcullen537 4 жыл бұрын
Hi. If I want to embed an object into coloured resin (using India ink) is it difficult to get the shades the same so 2 halves don’t look split ??. If so how would you recommend I do this please 🤔💕
@knulpi
@knulpi 2 жыл бұрын
maybe a sensitive scale can help here (with a sensitivity of e.g. 0.01 grams)
@pamcullen537
@pamcullen537 2 жыл бұрын
@@knulpi Thank you 🦆💕
@ColoradoCarrolls
@ColoradoCarrolls 2 жыл бұрын
Have a 4 foot by 8 foot flag I want to preserve. This technique will not work. Any other Idea's I can do to preserve a Flag given to me?
@benconnolly6762
@benconnolly6762 5 жыл бұрын
Can I colour this resin? I want to make some dice and I was wondering if this is possible.
@CJ-ho9rr
@CJ-ho9rr 5 жыл бұрын
ben connolly yes, you can if you use acrylic paint.
@sofiakaos5278
@sofiakaos5278 7 жыл бұрын
supose that i would fill a 5cm deep and 5m wide "hole" with resin on my balcomy with a bothom of river pebles... would it crack over time climate and our wheight or would last forever and look like a real river?
@thetrueaandy115
@thetrueaandy115 6 жыл бұрын
It depends how you treat it, if you leave it in harsh climates and leave it out all the time then it will break, if you put it inside in bad weather and only leave it out on sunny days then it will last forever.
@mr.tactown.253
@mr.tactown.253 4 ай бұрын
​@@thetrueaandy115How are they supposed to bring the balcony into their home, just pick it up and carry it in?
@Misora13
@Misora13 6 жыл бұрын
where can I buy the resin?
@cliffcarlo180
@cliffcarlo180 6 жыл бұрын
So the mix ratio is printed on the bottle, pity we can't see that though.
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
If you had the resin youd be able to see it. If you dont have it then why would you need to know
@cliffcarlo180
@cliffcarlo180 5 жыл бұрын
@@jonathanjones7044 For obvious reasons Mon Ami.
@tiberiu_nicolae
@tiberiu_nicolae 5 жыл бұрын
@@cliffcarlo180 Mon ami, c'est toi qui a l'air perdu ici. Regarde les instructions directement du manufacturier. Ce qui est evident c'est ton absence de debrouillardise.
@dinoilcagnolino3213
@dinoilcagnolino3213 7 жыл бұрын
How did you get rid of the bubbles?
@TirantiUk
@TirantiUk 7 жыл бұрын
just careful mixing and pouring is enough to prevent air bubbles, the resin used is polyester which is better for bubbles, two part polyurethanes can gas and create air bubbles when setting.
@arnoldgutierrez6855
@arnoldgutierrez6855 3 жыл бұрын
Hello, I was wondering if u knew how to to take something out of a epoxy casting, u see my stepdad has coin inside a thick epoxy casting n well he thinks it might be valuable n he would like to get graded, so by any chance u see read this message, can u help. Or should I just start beating it with a hammer lol thank u
@BRABUS1985
@BRABUS1985 7 жыл бұрын
Hello, I have one request.What is this liquid? And from which site can I write it out?
@Scarygothgirl
@Scarygothgirl 7 жыл бұрын
It is casting resin, you can buy it on ebay and other crafting sites
@janepoultney5207
@janepoultney5207 6 жыл бұрын
I always spelled it mold. Should I have been adding U?
@jameschristensen1658
@jameschristensen1658 5 жыл бұрын
Jane Poultney either way works
@embracedbyree
@embracedbyree 5 жыл бұрын
Can this be done with pictures?
@jameschristensen1658
@jameschristensen1658 5 жыл бұрын
Lorita Parker yeah but I think you have to laminate it first
@embracedbyree
@embracedbyree 5 жыл бұрын
@@jameschristensen1658 ok thx. I bought waterproof inkjet paper that I'm going to test out as well
@kaisobstel3521
@kaisobstel3521 4 жыл бұрын
how do i prevent an object from floating in the resin?
@mickeyromeo
@mickeyromeo 3 жыл бұрын
put the object on a very thin coat of resin, and let that cure. then fill the rest with resin.
@JMills-ru6mt
@JMills-ru6mt 6 жыл бұрын
If I were to do this with a butterfly, would this damage it in any way? Thank you ! This video is very helpful!
@davemetcalf1774
@davemetcalf1774 5 жыл бұрын
It would probably kill it
@marypaoletti69
@marypaoletti69 7 жыл бұрын
Awesomeness ⭐️⭐️⭐️⭐️⭐️
@sunahshin4107
@sunahshin4107 6 жыл бұрын
How did you make the mold?
@SUGAR_XYLER
@SUGAR_XYLER 6 жыл бұрын
use glass
@10B10R
@10B10R 7 жыл бұрын
thank you
@ashishradadiyalucentstudyp1621
@ashishradadiyalucentstudyp1621 6 жыл бұрын
Wt the name of the hardner bottle and its name pls....
@lunergarris5905
@lunergarris5905 6 жыл бұрын
I have a V. Tiranti art that only says de Sanctus studio on it trying to see what it is and it’s value. It’s very heavy looks like a plant holder stands like 3-4 feet tall. Any ideas
@okand4642
@okand4642 5 жыл бұрын
how do i stop from my object to move
@benjaminsnyder1430
@benjaminsnyder1430 5 жыл бұрын
be positive pour the resin in slowly after adding the object... did you not watch the video??
@benebutterbean2737
@benebutterbean2737 5 жыл бұрын
Could you cast a newborn baby in resin? I would like to see that.
@mahendrabhai7253
@mahendrabhai7253 7 жыл бұрын
I want this resin
@mooremason
@mooremason 6 жыл бұрын
I'm trying to preserve the paper document from my grandpa's funeral can you use this trick on paper
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
I really wouldnt
@Livefreeman
@Livefreeman 6 жыл бұрын
I am wondering wether I can mould my eye glass lenses, and make a cast using this resin, do you think I can get working lenses?
@jonathanjones7044
@jonathanjones7044 5 жыл бұрын
No
@jackiebrown2704
@jackiebrown2704 7 жыл бұрын
Can this product be used for a huge piece as well? 20 sq ft
@anasmrright
@anasmrright 7 жыл бұрын
Only if you have a lot of money.
@mattjfox
@mattjfox 6 жыл бұрын
I have this same question.. not really asking about the money part rather the feasibility and dangers that might be involved.
@peacemonger2070
@peacemonger2070 6 жыл бұрын
You would need to be very careful with the catalyst, to much you may have a fire, way to much will cause an explosion. Anybody who works with fibreglass will be able to assist you in expanding your knowledge. BE CAREFUL.
@rafaell-b588
@rafaell-b588 7 жыл бұрын
1st gloves!
@TirantiUk
@TirantiUk 7 жыл бұрын
True, i recommend the use of gloves AND protective eyewear.
@TheThreekeys
@TheThreekeys 7 жыл бұрын
Cool!
@2Snails1Shell
@2Snails1Shell 3 жыл бұрын
👍☺️
@Emolga6274
@Emolga6274 7 жыл бұрын
Cooooool
@alijahwhiting5370
@alijahwhiting5370 3 жыл бұрын
Poor doggo stuck in ice (aka resin)
@obeythelaw5504
@obeythelaw5504 7 жыл бұрын
Looks like the back side had air bubbles.
@BillieFingers
@BillieFingers 6 жыл бұрын
Obey The Law it's going to without a pressure pot. That's the better than I was expecting.
@benebutterbean2737
@benebutterbean2737 5 жыл бұрын
I would like to see a live bird or mouse in resin. Please do this and post it.
@oneclickawayasmr
@oneclickawayasmr 21 күн бұрын
No gloves is crazy
@bayenne5b
@bayenne5b 7 жыл бұрын
how is the mold made?
@TirantiUk
@TirantiUk 7 жыл бұрын
the mould used is made from RTV silicone rubber.
@bayenne5b
@bayenne5b 7 жыл бұрын
It should be alright, glass is strong. Can you show me when it's finished? because I'd love to see
@حبةخردل-د2غ
@حبةخردل-د2غ 7 жыл бұрын
I think the idea of the mold is to be made of a substance that does not adhere to the resin. I guess glass will.
@ImaginaryEvil
@ImaginaryEvil 5 жыл бұрын
It bugs me that the dog is off centre. But otherwise great video, thanks
@RupertRumble
@RupertRumble 4 жыл бұрын
I want to do this with one on my teeth and make it a keychain.
@claypottinger7372
@claypottinger7372 6 жыл бұрын
At 1:11 into the video you wrote, "Take you liquid hardener", rather than 'Take your...'. It is an excellent piece of film work...I'm sure you will want to edit the blemish.
@stclairstclair
@stclairstclair 6 жыл бұрын
Great, another non talking mime video.
@dandunning7731
@dandunning7731 7 жыл бұрын
Anyone here because of Hank’s gift in Breaking Bad?
@jeremycatches9766
@jeremycatches9766 5 жыл бұрын
A two dimensional piece in a three dimensional display. I was kinda disappointed. :)
@joshh8413
@joshh8413 6 жыл бұрын
Kill the music next time.
@keithhoward4059
@keithhoward4059 5 жыл бұрын
Thank You
Resin Flowers - How to Dry and Preserve Flowers in Epoxy Resin
12:45
GlassCast Resin
Рет қаралды 481 М.
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
Don't underestimate anyone
00:47
奇軒Tricking
Рет қаралды 23 МЛН
快乐总是短暂的!😂 #搞笑夫妻 #爱美食爱生活 #搞笑达人
00:14
朱大帅and依美姐
Рет қаралды 13 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 12 МЛН
Resin Casting tutorial: Pressure Casting Water Clear WC-786 Resin
9:44
Brick In The Yard Productions
Рет қаралды 291 М.
The Secrets That No One Told You About When Using Resin
19:36
Steve McDonald Arts and Crafts
Рет қаралды 691 М.
(165) HOW TO INVISIBLY SUSPEND THINGS IN RESIN
24:07
Jules Madison ArtPreneur
Рет қаралды 25 М.
This Guy Added Salt and Crystals to Resin - Guess What Happens?
8:15
Steve McDonald Arts and Crafts
Рет қаралды 326 М.
271. Hollow 3D RESIN Casts FROM HAIRSPRAY?!!! WHAT?!
26:09
Daniel Cooper
Рет қаралды 203 М.
How to mold and cast resin dashboard knobs
16:16
Keith Lee
Рет қаралды 127 М.
First time using resin! 10 Rookie Mistakes to Avoid
14:48
97 Projects
Рет қаралды 1,3 МЛН
Balloon EXPLODES in Clear Epoxy Resin. What happens?
13:32
ResinWoodArt - jedrek29t
Рет қаралды 508 М.
How many people are in the changing room? #devil #lilith #funny #shorts
00:39