Embossing Patterns in to Leather

In this video we look at the process of embossing leather. We look at various different methods used to put a pattern or texture on to the surface of plain veg-tanned leather. We look at using small items, including a maker’s mark stamp, wax seal stamps and everyday objects to add a simple design to the leather’s surface. We then look at using embossing folders to texture larger pieces of leather. We show the use of the Sizzix Big Shot Pro die cutting and embossing machine.
𝐐𝐔𝐈𝐂𝐊 𝐋𝐈𝐍𝐊𝐒:
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Sizzix Big Shot Pro Cutting & Embossing Machine 660550
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐊) 𝐋𝐢𝐧𝐤: amzn.to/2XGq1sf
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐒𝐀) 𝐋𝐢𝐧𝐤: amzn.to/2TB8MqV
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐂𝐚𝐧𝐚𝐝𝐚) 𝐋𝐢𝐧𝐤: amzn.to/2TBaTuC
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐆𝐞𝐫𝐦𝐚𝐧𝐲) 𝐋𝐢𝐧𝐤: amzn.to/3d0KjDd
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐀𝐮𝐬𝐭𝐫𝐚𝐥𝐢𝐚) 𝐋𝐢𝐧𝐤: amzn.to/2X1vvhK
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐉𝐚𝐩𝐚𝐧) 𝐋𝐢𝐧𝐤: amzn.to/2X1hCAi
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: AP1000 1 Ton Arbor Press
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐊) 𝐋𝐢𝐧𝐤: amzn.to/2xl6Uub
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐒𝐀) 𝐋𝐢𝐧𝐤: amzn.to/38rOpkw
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐂𝐚𝐧𝐚𝐝𝐚) 𝐋𝐢𝐧𝐤: amzn.to/2wFX7OJ
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐆𝐞𝐫𝐦𝐚𝐧𝐲) 𝐋𝐢𝐧𝐤: amzn.to/2TGHi2k
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐀𝐮𝐬𝐭𝐫𝐚𝐥𝐢𝐚) 𝐋𝐢𝐧𝐤: amzn.to/331hIJu
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐉𝐚𝐩𝐚𝐧) 𝐋𝐢𝐧𝐤: amzn.to/2wHGhiv
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Key Ring Cutting Dies
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐊) 𝐋𝐢𝐧𝐤: amzn.to/3egBm8N
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐒𝐀) 𝐋𝐢𝐧𝐤: amzn.to/2TBCtbv
🌏 𝐀𝐥𝐢𝐄𝐱𝐩𝐫𝐞𝐬𝐬 𝐋𝐢𝐧𝐤: ali.ski/AlLp48
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Letter Stamp Set
🌏 𝐀𝐥𝐢𝐄𝐱𝐩𝐫𝐞𝐬𝐬 𝐋𝐢𝐧𝐤: ali.ski/CiWshB
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
If you'd like to check out our website, where you’ll find loads more content, head over to:
🌏 geordiesworkshop.com
✅ 𝐋𝐈𝐍𝐊𝐒:
All of the tools and other materials used in this video are listed with links to where you can obtain them in your own country on the page devoted to this video, which you can see here:
🌏 geordiesworkshop.com/30-embos...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
❤️❤️❤️ 𝐏𝐋𝐄𝐀𝐒𝐄 𝐁𝐄𝐂𝐎𝐌𝐄 𝐀 𝐏𝐀𝐓𝗥𝐎𝐍 𝐀𝐍𝐃 𝐇𝐄𝐋𝐏 𝐒𝐔𝐏𝐏𝐎𝗥𝐓 𝐓𝐇𝐄 𝐂𝐇𝐀𝐍𝐍𝐄𝐋: ❤️❤️❤️
If you like my videos and you’d like to help support my channel, allowing me to continue to create regular content please consider becoming a Patron. For more information, please visit my brand new Patreon page:
/ geordiesworkshop
As a patron you get lots of extra benefits, including:
✅ You can watch Geordie's videos - Without those annoying Adverts!
✅ You get access to additional ‘Patron-Only’ videos.
✅ You get listed as a Patron in the end credits on every new video.
✅ You’ll be eligible for Give-a-ways of reviewed tools.
✅ You'll get early access to videos before they go on KZbin.
✅ You'll get Free access to past and future plans, patterns etc.
✅ You can access Geordie's community and ask me questions.
✅ You'll qualify for 5% off all our 'Geordie Tools' brand of products.
✅ You'll get behind-the-scenes videos, blooper reels and extra footage.
✅ You'll get a chance to suggest ideas for videos.
A big 𝐓𝐇𝐀𝐍𝐊 𝐘𝐎𝐔! in advance.
Geordie.
*Benefits differ, depending on the pledge tier you select.
𝐎𝗥, if you would just like to buy me a coffee or make a one-off donation, please use the PayPal link below:
🌏 www.paypal.me/GeordieLeatherUK

[@lynnosullivan1754]

I almost can't believe I found this. I have been paper crafting for years and have many, many embossing folders, dies, stamps and inks. I have a Sizzix Big Shot Plus. I recently purchased small leather labels for quilting labels (I also sew) and was searching for how to make them myself. Bingo, I can do this with what I already have. Thanks so much for sharing your craft.

[@MsWigsy]

I am so pleased to see someone else using small papercraft dies, embossing folders and a Sizzix BigShot machine for leatherwork as well! I thought I was the only one! I am not artistic enough to do my own tooling, so this gives me a helping hand 😃👍

[@HobbyBloxs]

Yes. It is a very versatile machine and often overlooked by leatherworkers.

[@fredalbrecht986]

Probably the Most helpful Leather Craft video I've seen. Thank you.

[@HobbyBloxs]

Wow, thank you!

[@SDIVADesigns]

Oh my goodness! Thank you so much for your video. I have all the tools I need to do this and can't wait to play. I have been paper crafting for years, but have also been sewing for years so I have a Kamsnaps snap press with flat attachments I can use instead of an arbor press. I was first thinking of using my little mini vise grip, which would be a super inexpensive tool to get for this. That's when I realized my snap press would work so well. I do have a 3D printer so this has really opened up a whole new rabbit hole!!!

[@kbaxterpackwood]

which 3D printer do you have, I'd love to cut my own stamps and printing plates.

[@SDIVADesigns]

@@kbaxterpackwood I have an AnyCubic Chiron

[@kbaxterpackwood]

@@SDIVADesigns do you also have a Cricuit or a Silhouette Cameo? And if so which do you use more the 3D printer, or both equally?

[@SDIVADesigns]

@@kbaxterpackwood I have a cricket, silhouette and GCC puma, but these are completely different types of machines from a 3-D printer. 3-D printers create shapes with three dimensions and paper or vinyl cutters just cut out flat shapes.

[@kayequinn7146]

Hi...just found your channel. Thanks so much for the info. I'm new to stamping die cutting. Bought a Sizzix the other day & checking all sorts of videos. Now I can add leather work also. I'll check others of your videos.😊

[@HomesteadMercantile]

I love using all kinds of other materials with leather. Good ideas

[@HobbyBloxs]

Yes! Thank you!

[@deankay4434]

The sky is the limit as long as you have flat stock. If you have a bench vise with brass jaws, it would work. Arbor presses can range from 1,000 pounds to 50,000 tons of pressing power. You wallet will determine what you purchase. If a local repair shops close or mechanics shop, these item are common tools and bidding at a live auction can be fun. Just don’t get carried away. If you weld, or know someone who does, simple shapes can be cut, welded on outside corners (Making it Easy to Dress by Grinding) or put a consistent sharpe edge on the pieces. You can emboss as long a practice with the leather you will use provides the results desired. Nice job introducing use to this decorative leather making style! Thanks.

[@HobbyBloxs]

Thanks for the info.

[@flyingcat2054]

I like the use of non traditional leather stamps for impressing!

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@svetlanahenderson4014]

Thank you, Geordie!!!! I was looking for the easy way to do embossing on the leather. Thanks again.

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@audreyplaysnice2086]

What a great video! I had no idea how many ways you can do this. Actually, I thought it was beyond the average person's means or ability.

[@suzanneh4275]

I’m new to leather making, recently saw the Big Shot on a KZbin, did more research and this is how I found you. Thank you for your video! It is so well presented; very clear even for a beginner like me. Super informative. I will be seeing you again!

[@ericastannard2635]

Hi! I’m Erica from the US! I just happened to see this on KZbin & I was so excited to see you using card-making supplies! Never in a million years would I have thought that I could use leather in my crafts! I have dozens of embossing folders including the newer 3-D ones, hundreds of dies & both of the exact models of die cutters that you used! I have quite a few of the thicker steel rule dies, too! And now that I’m thinking about it, I have always read that they could be used with leather, I just never thought about following through on that, though! I own lots of wax seals, also, so I’m in good shape there, also! I’m going to look on Amazon for leather, I believe you used a 2mm thickness, so I can probably try this in a couple of days! Haha, this is amazing! And with the new 3-D folders, we even give the card stock a quick spray of water for the same suggestion: to soften the paper fibers! Now we have been told (by Tim Holtz, the Ranger/Sizzix guru) to run those embossing folders 3 times through the machine. Perhaps you have experimented with those folders, too? I have “liked & subscribed” (& since I’m very active on KZbin perhaps more people will see you because of my activity!) Thank you so much, I have a whole lot of new ideas to try & I will look for more videos now! Erica❤

[@westboundpony]

I have a ton of cutting dies and embossing folders in my stash. I have not heard anyone suggesting using them with leather until now. You are brilliant!

[@HobbyBloxs]

Thank you. Yes, it's great that you can use your existing dies and folders on leather too.

[@kbaxterpackwood]

you can also use them on metal sheet as well!

[@westboundpony]

@@kbaxterpackwood Can confirm, I love it on leather! I am going the metal too, thank you for the suggestion!

[@teresaswietochowska4433]

Oh, how I loved your video! The way you explain everything is easy to understand and at the same time you give so many useful tips, it's marvelous. And above all, I really liked how your workshop is clean and organised, it's so nice to look at. Thank you for the links as well, cheers from 🇵🇱

[@sandrasanchez1568]

Mind…. Blown…. Thank you!

[@pamelagahan5601]

Thank you so much Geordie, loved watching your video's. You are so easy to listen to as well. Pamela. Tasmania Australia

[@HobbyBloxs]

Hi Pamela. You are so welcome!

[@walKINGbalance]

Thanks for the clear demonstration! Super useful!

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@eponaskye4158]

Thank you so much for doing this video. I have learned a great deal. I have a 3D printer and Sizzix, so I am off to make my own folder. 😀

[@HobbyBloxs]

Glad it was helpful!

[@donb3557]

Nice use of the Sizzix which I am familiar with for crafting and my card making. I had never thought of using it to emboss leather. I have so many embossing folders and cutting dies already so you’ve just added a few more strings to my bow in one fell swoop. Many Thanks!

[@HobbyBloxs]

Glad it was useful.

[@loriarps4239]

Thanks Geordie! I just found your KZbin channel. I have been experimenting with leather and embossing folders. You have given me a wealth of information. Thank you so much! Keep making and inspiring.

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@Why_Land]

Get 'em Geordie!

[@HobbyBloxs]

Thanks.

[@samuelgallegor411]

I'm just flabbergasted with your channel, there isn't any other word that can explain the great love I have for your videos. At Ender Cross Leather Workshop we are in the process of creating our first wallet design, it is called the "Gerodie Wallet" inspired after you! Thank you Very Much!

[@HobbyBloxs]

WOW! What can I say? Thank you for your kind words. I often wonder if I should keep going with my channel and often think of giving up. Then I get a wonderful comment like yours and that inspires me to continue. I'm humbled by your idea for a wallet made in my name. I hope you show it on your new channel so I can get to see it. I've just subscribed, so good luck with your project and I hope you have great success!

[@samuelgallegor411]

Geordie Leather It is with the greatest love in the world and admiration. Although I seldomly upload videos to KZbin, it would be great if I could get you Email to make sure the pictures get to you once the Gordie Wallet is ready! My Email is: [e-mail]

[@NeldasCrafts]

Thanks so much for this video. Glad I found you. New subbie here. I checked all the links and now I know what to get next. Blessings!!!

[@HobbyBloxs]

Thanks for subbing!

[@lacocotta8897]

Dear Sir, thank you so much for your video!! It’s amazing!!! You are the best!

[@HobbyBloxs]

You are very welcome

[@beehaleather7312]

Thank you. Well done.

[@HobbyBloxs]

Thanks for your comment. I appreciate your feedback.

[@skywarrior3508]

YOU ARE THE BEST OF THE BEST.

[@HobbyBloxs]

Thanks!

[@donnalees3530]

Great video! Thanks!

[@HobbyBloxs]

Glad you liked it!

[@chillmanhillman2946]

Love your videos. Thanks for the knowledge. Coming out of the quarantine a leather craft enthusiast.

[@HobbyBloxs]

That is awesome!

[@gdmonroy]

Same here!

[@susane945]

Wow! Thanks so much for your very informative tutorial! Really good info. ☺️🌸💖

[@HobbyBloxs]

Glad it was helpful!

[@howardjohannssen4607]

Enjoying your videos!

[@HobbyBloxs]

Thanks for your comment. I appreciate your feedback.

[@Coppae]

Brilliant ingenuity!

[@HobbyBloxs]

Thanks for your comment. I appreciate your feedback.

[@kevinmurray781]

I’ve just started out in leather working ,mainly making knife sheaths I’ve been looking at embossing stuff I make but been a little unsure of how to go about it,your video has helped me so much get my head around it thank you.

[@HobbyBloxs]

Please you found it useful.

[@Surya_gaming732]

I can help you, I am hot stamping foil machine Operater

[@australianredochreleather1157]

Thank you, brilliant :)

[@HobbyBloxs]

Glad it helped!

[@valerielevitt3016]

Thank you.

[@HobbyBloxs]

You're welcome!

[@Surya_gaming732]

Sir, I see your 2nd video. Your Machine is good. And your information speach is nice. I am Hot stamping foil machine Operater.

[@HobbyBloxs]

Thanks for your comment.

[@marianedossantos1857]

Só cool, thanks from Brasil!

[@HobbyBloxs]

Thanks.

[@sylviaroberts5936]

I am so pleased to have found this tutorial, because I have this Big Shot Pro too and have searched the Sizzix videos, Spellbinders, Tim Holtz and Eileen Hull videos without finding the most effective sandwich to cut my leather. It would just not go through and 'bite'. You have explained it perfectly and shown the sandwich in clear detail, much appreciated. It's taken a Geordie to show a Mackem how to do it! Incidentally, I've been die cutting cardstock reasonably okay with my Bigz dies but when it comes to leather, the scoreboards are cutting through the scored areas too so wondering what the best sandwich is...

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@tilldeath2678]

Sir i just found your channel and I shared your channel on Reddit for beginner leather crafting I found your channel by accident and I love the depth of teaching you go into. By chance are you going to continue making videos

[@HobbyBloxs]

Hi Dakota. I have replied to your personal email.

[@LMPhotoProductions]

What a clever way to save money and obtain an amazing work! Thank you very much Geordie for sharing this! I do have a question about the leather after embossing it... Do you use something to protect it? Do you treat the leather in any way? Thank you again! God bless you and have a nice day!

[@HobbyBloxs]

Hi. You just treat the leather like any other piece of veg tan. You can dye it just as normal and apply whatever finish you like to it.

[@shirleymalar304]

I had no idea that a cutting die could be used in one of those craft machines! That's kind of a 'game changer' for the leather hobbyist. All your perfectly arranged and squeaky clean leather supplies behind you make me smile. I love that! It's my goal to have a workshop like that. Did you use that nylon roller to cut leather on the dies before getting the cutter? I have a key fob die that is supposed to be used with a nylon roller, but I haven't tried it yet.

[@HobbyBloxs]

Hi. I've used the press for all of my die cutters from day one - It just makes sense!

[@poly66445]

I mees you Georgy, i hope you are doing well and soon we can see you teaching us something interesting about leather. Hug 🤗

[@HobbyBloxs]

Hi. Thank you for your concern. I am struggling with some health issues at the moment. I am uncertain when/if I will be able to return to making more videos. Take care.

[@Andy-in8ej]

Bumboy.

[@scormack56]

Very good I would use an acrylic plate that you get with the machine and also damp the leather a wee bit. Maybe you've tried that . I think the plastic embossing folder would last longer. 🐕👍

[@HobbyBloxs]

Thanks for your input. I appreciate you taking the time to comment.

[@juliebenac]

Just found your channel, and it's a gold mine! I'm very new to leather, in fact, I really don't work in leather, but am making small leather items from finished leather. I'm learning the hard way that you can't use a metal leather stamp on finished leather, no matter how hard you pound. But all I have is finished leather! a LOT of it! Do I heat up the metal stamp and use an Arbor Press? Should I wet the finished leather first?

[@HobbyBloxs]

Hi. I’m assuming by ‘finished leather’ you mean upholstery leather. The type used to make sofas? If so, then this type of leather has been tanned chemically and generally can’t be ‘tooled’ ( It can’t be stamped, carved or otherwise worked with leather tools.) You need natural veg-tanned leather if you want to tool it. Hope this helps.

[@carolbyers4194]

Love watching your videos and you have got me very interested in making key rings. What would the best thickness of leather be to make keyrings please and where is the best place to buy leather. Looking forward to watching your next video.

[@HobbyBloxs]

Hi. The thickness would be depend on the design. A key fob folds two layers, whereas a key strap is a single layer. As a general rule, I'd say the finished thickness should be around 3-4mm thick. I'm in the UK and I buy my leather from LePrevo Leather.

[@davew4526]

Love the videos, looking forward to the foil video, quick question what thickness of leather would you recommend to make a keyring?

[@HobbyBloxs]

Thank you for your comment. I'm just clearing out my inbox of old comments, so there is no need to reply to this. Thanks. Geordie.

[@dawgyv72]

I used your amazon affiliate links to help you out brother!! Thanks! Can't wait for your foil videos. Do you use an arbor press for that too?

[@HobbyBloxs]

Hi. Thanks for your support. I will be showing the use of the Hot Foil Stamping machine next.

[@mohannadahmed7110]

Sir, you are a great man ❤️ I have A question this way to empossing on the leather remains for a long time, or disappear with the days thank you.

[@HobbyBloxs]

It is permanent.

[@jenniferjones9994]

Thanks so much. Your video was extremely informative. Is it possible to do embossing of a softer leather?

[@HobbyBloxs]

Hello Jennifer. Yes, you can but the impression won't be as crisp.

[@omarfarouq1890]

18.50 is the secret be inventive like he said

[@andyanderson4604]

Great job...have you watched a lot of Mr. Bean

[@HobbyBloxs]

Yes I have

[@Charlotte-Ig4pz]

TY! But where do I get the carving stamps???

[@best_clips_ph]

Awesome! Hi sir, i just wanna ask if how can i make a custom steel rule die?

[@HobbyBloxs]

Hi. I don't make my own dies. You can get custom made cutting dies on AliExpress.

[@best_clips_ph]

@@HobbyBloxs I'm wondering if can really make my own dies without any machine because there are no tutorials for that. Do you have a link on AlieExpress to where did you purchase dies? Thank you so much.

[@100mmvega]

Hi what is the plate you are using as a base on your Arbor press?

[@markwatts7634]

Hi Geordie, thanks for the advice on the plastic embossing plates, I have looked at those in the craft shops and wondered if the would be ok on Leather, now I know. Also good idea on the paper cutting dies as well, I shall give that a go. I have had very good success with some embossing small items with salvaged items from building sites, much like the metal plates you have, although I dont have a mangle like yours, although that is a cool idea. I simply used some plywood offcuts to provide the hard surface and using some quick clamps to provide the pressure, and left for a while to take the form. A simple and cheap alternative for novice crafters such as myself. I have also had good results with using rubber card making stamps and Archival ink for personalising, and embellising some pieces Are there any other alternative tools, or techniques that you use? Perhaps if so, it could be a good video to share.

[@HobbyBloxs]

Hi. Thanks for your comment. Yes, you are right - there are many different things around you that can be used to emboss in to leather.

[@shannonhayes4859]

Can you tell me where you found the daschund template? I have one of those precious puppies and would love the die cut.

[@HobbyBloxs]

Hi. Just search eBay for 'Daschund Cutting Die' and you'll find lots of designs. I have a Daschund to - Lovely dogs.

[@shannonhayes4859]

@@HobbyBloxs thank you so much! Love your videos!

[@naturalmystic9]

Hi would it be possible to colour or dye the embossed design, if so with what so that it only goes into the impression parts of the design? I'm uk based. Thanks

[@HobbyBloxs]

Dye would spread, but you could use acrylic paint for leather.

[@naturalmystic9]

@@HobbyBloxs thank you for responding.

[@beautiful_bags]

you put the piece of leather onto the machine to be pressed, does that bottom plate come with the machine or is it something you put on yourself, reason being as i looked at a few arbor machines and they dont have the square plate, thanks

[@HobbyBloxs]

Thank you for your comment on Geordie's KZbin channel. Geordie has been away dealing with some health problems but is returning to KZbin very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

[@pauljojo831]

Will this be a permanent one?

[@HobbyBloxs]

The impression will be permanent.

[@leatheraccessories646]

Hi ! that cutting machine seems really expensive to me because of how limited it is, I use a press from the bookbindery and I can say that it has several uses, in addition to the fact that I only spent 100 euros on it as it was bought at a flea market, and if you allow me a little advice! when you want to make embossing, put a 1 or 2 millimeter cardboard sheet under the piece of leather, the impression will come out much more pronounced and beautiful because the stamp will not meet the hard surface under the leather but will have a small layer where it sinks oh, and one more thing, be careful with metal models!!! if the model is made of stainless steel, it's ok. but if it's made of iron! attention that the iron oxidizes immediately on the wet piece of leather and a blackish impression will remain, at least I experienced this and I calmed down... in the best case you can put a thin piece of nylon like the one to wrap

[@gelgameshnassar5517]

Hi how I can get this cutting machine and please I saw in back of you grey Sewing machine if is that good for leather I need the wedsite to get one thanks

[@HobbyBloxs]

Hi. There is a link to buy the cutting machine in the description. The sewing machine in the background is only suitable for very thin leather. It is called Singer Heavy Duty. Thanks.

[@italcraft1644]

Really it can cut leather by Wood Die Cutter? Die cutter enter on machine? Because Die cutter height is 25mm+ .please let me know I want to buy . I have big shot plus but don’t work .

[@HobbyBloxs]

Hi. You would need the biggest machine Sizzix do: The Sizzix Big Shot Pro Machine 660550 Industrial Strength Die Cutting & Embossing Machine. This has the depth for wooden dies. Links: Amazon (USA) - amzn.to/2WpWS4j Amazon (UK) - amzn.to/38d5eSd

[@italcraft1644]

@@HobbyBloxs thanks a lot. I m going to buy big shot pro. Hope it will work perfect for wooden die cutters 25mm.

[@karenholst8306]

👍👍👍💕💕💕🇩🇰

[@selinkoc7401]

Hi, How can I emboss a figure with hot stamp foil to the patent leather. I tried many times but patent leather did not absorb the hot foil. What should I do?

[@HobbyBloxs]

Hi. It sounds like you are not using a high enough temperature. I suggest you use some scraps of the leather and try using higher temperatures until you get a good impression. You may also need to apply more pressure or hold it for a little longer. It's all experimentation, I'm afraid. When you find the perfect settings for that type of leather, write it down and keep it for future work. Hope this helps.

[@Surya_gaming732]

I can help you. I am hot stamping foil machine Operater

[@parkourboyswales]

How do you know how to price your crafts?

[@HobbyBloxs]

Hi Jason. This is actually the topic of one of my upcoming videos. So, I go into this in some depth in the video.

[@RyanAshley419]

You may want to check your link to your Patreon account. I click on it and get an error page on the main Patreon website. FYI.

[@HobbyBloxs]

Hello. Thanks for letting me know. I'm closing my Patreon account, due to my declining health and as nobody has shown any interest in supporting my channel..

[@RyanAshley419]

@@HobbyBloxs I am sorry to hear that. I have thoroughly enjoyed your videos. I do hope you can find a way to continue them.

[@fredrickneidhardt8064]

Aren't these techniques debossing rather than embossing?

[@HobbyBloxs]

Yes, you're right.

[@fredrickneidhardt8064]

@@HobbyBloxs so how does one emboss? I see leather with patterns raised up, is it just that everything but those patterns are actually pressed down?

[@HobbyBloxs]

Hi. Yes, that's right: When you deboss, the design is pressed below the surface. When you emboss, the area around the design is pressed below the surface - giving the illusion that the design is raised. I hope this helps.

[@fredrickneidhardt8064]

Very much so. I've been trying to figure out how to "emboss" when it's kind of the opposite. No one else could explain it to me. Thank you so much

[@karenholst8306]

👍👍👍💕💕💕🇩🇰