I 3D Printed a Toilet

[@InsanityPlusOne]

I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed

[@anastasiszaro]

Please pin this comment.

[@johnecker]

@Emilytheengineer why do you think Frank has over a million subs but can not get this many views?

[@xathridtech727]

​@@johneckerbecause subs stopped meaning anything 3-4 years ago. With the customized home feed it matters who you watch not who you are subscribed to.

[@Deja117]

Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...

[@InsanityPlusOne]

in general bowls have a wide lip, try sit on any toilet with the seat up, the width tends to be so you can clean them more easily@@Deja117

[@SkivaksXD]

now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)

[@dcurry7287]

Gridfinity compatible OpenToilet when?

[@Pappagar]

I can't wait to mod my 3d printed toilet

[@jan_harald]

don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)

[@LKLM138]

inb4 this "open toilet" is blown out proportions and people are walking around in 20 ton toilet mechas made out of PLA

[@danwellington3571]

@@LKLM138Everything devolves into skibidi toilet eventually

[@pluggedinpete]

I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."

[@dolphin64575]

The toilet's comedic timing for the "last flush" @ 12:07 is perfect.

[@narxic]

You’re right. Got me good!!

[@UhrwerkKlockwerx]

This is like if William Osman and Michael Reeves had a daughter, the chaotic energy is hilarious and I love it. Definitely subscribing.

[@YossiRafelson]

William Osman did have a daughter. He calls her potato.

[@MaliohammadDesigns]

He meant a daughter of both william and michael reeves@@YossiRafelson

[@iambear.6526]

@@YossiRafelson So you're saying Emily's channel is a viewport into the future because Emily is Potato?

[@E-dart]

They were roommates, they couldave and that cept it secret

[@melonoverlord243]

Just curious how would 2 men have a daughter…

[@spiritedkodama3508]

There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.

[@Srfingfreak]

And physical health!

[@soulsbreaker]

this is so accurate, and somehow also represents my life with my wife.

[@MR.JUSTCOD]

and sanity

[@jonathandill3557]

If my daughter 3D printed a working toilet with all of those features, I'd sincerely be beaming with pride despite my wife's review of this video.

[@ZephyrysBaum]

Your wife seems very critical, looking at the comments you’ve made on this channel lol

[@jonathandill3557]

@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.

[@ZephyrysBaum]

@@jonathandill3557 She's probably a nice person nonetheless!

[@jonathandill3557]

@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer. Printing something actually useful?✋🏻 Printing something that I probably shouldn't be printing? 👉🏻

[@gabrieldudlicek8206]

Now that you’ve mastered printing large parts and welding them together, you should make a life size 3DBenchy and boat around in it.

[@johanbjorkman1914]

This is gold.

[@nathanielhill8156]

get a motor and make a 3D printed toroidal prop. (also, for the love of God, add a bilge pump and a triple hull)

[@archy656]

Aaaaaan She did it now :D :D

[@spinosaur3008]

omgaa she did it

[@Roar8384]

You told the future

[@tobyCornish]

Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.

[@martinschroederglst]

This is a magnificent idea!

[@hamsterbuilder7796]

Yes!

[@polerix]

Crab walking crap chair

[@OmniversalInsect]

The toilet from better call saul

[@ajreukgjdi94]

Emily: "You deserve one, last, good flush" Toilet: "How about no"

[@clownwreck]

Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.

[@lasskinn474]

that's it's whole own 24/7 hobby. if you have uses for plastic block or plate things its far easier to melt and cast/form that way

[@magebear7]

Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.

[@potteryjoe]

So now you make a grinder & filament maker & recycle the whole thing. And all those other things. It'll be a hoot.

[@AceOfBlackjack]

Shush you horrible person, they are a great creator.

[@jackmuchukot7201]

boring

[@EvilSpyBoy]

Ive discovered those garbage 3d pens are actually awesome 3d welders. Their tips melt the seam you trace and they fill it with filament

[@dragonboii7864]

you could totally turn this into a flower bed, I mean its a rainbow of colours it would fit right in a garden it even has that art gallery vibe to it

[@Lion_McLionhead]

Not recycling that PLA. The world needs an inflatable toilet.

[@spartenz14]

0:09 While everyone is talking about the toilet gag, I want to know, WHY HAVEN'T YOU PAINTED THAT ROOM PROPERLY????

[@UncleKennysPlace]

This was a gag?

[@uiopuiop3472]

nO TIME FOR THAT NO MORE NEVERM

[@draxgoodall3685]

My thought exactly

[@uiopuiop3472]

and nevermore@@draxgoodall3685

[@BruceNJeffAreMyFlies]

Good enough is GOOD ENOUGH!!! Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?

[@Kazbazerwatt]

This video taught me how a toilet works.

[@kaboomgaming4255]

same

[@shelbyseelbach9568]

For the most part. It's not completely accurate.

[@Flyingcar100]

if you could print a clear one you could better see how it works

[@drzruler]

The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!

[@twinsunianlp7359]

It feels like Emily is reviving a phase of kids playing with “pooping” dolls

[@tdata545]

Kind of really like the weird 70s ArtDeco thing you got going on. It's like if Mondrian made a toilet.

[@ZaxstUser]

PLA toilets are little hobby of mine, I also love chaos and abstraction, this video checkss more marks than i thought its possible

[@sciencex-wissenschaftundte2587]

The Wheel breaking off the second time right before you wanted to pour the water in is such comedic timing, this Toilet is a paid actor

[@KevinTurner-aka-keturn]

So many pieces for something that large. You could really use a bigger printer. Maybe a 10' tall one?

[@nimoy007]

Somebody put that toilet in an art museum

[@JustLost1030]

Truly the cursed content I am here for.

[@_irdc]

I am *so* there for more of whatever this is.

[@JoelCreates]

It's not wasteful if it's full of waste

[@TheNextDecade]

I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack. Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!

[@Letsplayer9998]

As an engineer; I am screaming in my head. What a f-ing chaos 😂 no thoughts, just dos.

[@nicholasmcintyre4166]

I like to imagine the inventor of the flushable toilet getting equally exited at the first successful flush.

[@Kinekitsu]

Emily’s war on the Environmentalists continues😂- This was absolute beautiful chaos and I’m here for it!

[@mandoreforger6999]

She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.

[@alveolate]

emily needs to do a collab with greta thunberg

[@josuelservin]

The line between genius and madness is very thin, Emily came, murdered the line, chopped it to pieces and used it to feed 3D printers...

[@bernardtarver]

The amount of direct and indirect waste (no pun intended) with 3dp is astonishing.

[@jaya-surya-t]

This is the best video I've watched in a while 😂. Please keep on doing whatever this is, Emily.

[@BakeBakePi]

How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol

[@midnightstudio3742]

DAN AS THE EPA LOL

[@wkdpaul]

First time viewer, and this was the most ridiculous thing I've seen in a while !!! Love it! *subscribed*

[@oo2454]

i think itd be a nice ride with 2 rear hub motors and 1 front fork for steering. so close to a street legal mobility toilet

[@MAJ_T_Bagger]

The chaos is infectious. Never thought I'd see a 3d printed toilet, solid effort!

[@hawkings22]

Emily's just insane enough to be amazing

[@GermanTopGameTV]

Not only is it an awful idea, it's also an awful design, it's awfully engineered, looks awful, has awful ergonomics, an awful environmental impact and no practical use. I'm impressed, it's much better then anything I ever made!

[@Nightowl423]

I think Emily should lose her 3-D printing pass for a week😂

[@Lizlodude]

At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.

[@turtleisaac]

Never until I found this channel a few days ago had I seen someone with such relatable levels of ADHD. I approve.

[@evilpenguin219]

another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare

[@psirvent8]

And then set them in the sun for the UV resin to cure ? Would it work under winter sun though ?

[@memejeff]

that thing looks incredible

[@renzesparza6281]

“How did you get the camera?” Is so funny. Love subtle meta stuff like that

[@novamaster0]

I am really surprised that nobody tried putting a candy bar inside to see if it would flush.

[@CautiousCrow]

This would make an amazing lawn ornament / bird bath. It's self refilling and can be easily cleaned by flushing. The birds can perch on the arm rests and even get snacks from the cup holder.

[@ecoKady]

I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor. I'm so glad I found you on the Maker Secret Santa. Have a happy new year!

[@shagreobe]

Thats where I found her too

[@kevinleee3408]

You forgot to add the Jets in the Rim that create the swirl

[@Real_Name_Redacted]

How can you see this title and NOT click ?

[@Swordsman_gaming-k4n]

Honestly I agree like the title of this video is just too good to not click

[@heyspookyboogie644]

“I already committed to the bit” oh I feel you. 😅

[@RG-3PO]

Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.

[@SomeoneNone123]

This would make a cool flower pot.

[@RandomPerson_860]

I did a thing but a girl

[@zoranradakovic2199]

correct

[@HurdleVR]

wtf

[@jasonlewis810]

New to this channel, and I took me literally 5 seconds of this video to know... I need to see more. Fantastic intro!

[@ClusterOfDuck]

some person with way to much money would have paid alot of money for this in some fancy art gallery .

[@adolphbot]

This is amazingly funny. How about you make a huge 3D printer and print an igloo, next?

[@skibdenhollander7361]

Your videos are a pendulum that swings between well engineered ideas and absolutely unhinged chaos.... and I'm here for it.

[@abyssalreclass]

Question: If this thing is on wheels, how does the plumbing get hooked up (and stay hooked up) while it is moving around

[@demonprincess5634]

Im a girl and I been 3d printing for 4 year, but one thing that bother me in all that time. Where are all the girl 3d printer on KZbin, all i see is guys guys guys WTF. Thank you for being so awesome love you

[@Zeldur]

This is so chaotic... So cursed.... Chaos engineering next to cursed robotics. Totally subscribing

[@eclipse-3812]

I haven’t checked on you channel in almost a year so I’m now watching all videos from newest to oldest and every time I see a video title I die laughing, good job

[@_shadow_1]

This might be the first time in history that a member of homo sapiens has decided to 3D print a full sized fully functional toilet.

[@alexphelps7042]

This channel is like the alternate timeline where william osmans house didnt burn down & he still builds stuff

[@zrobotics]

I don't think this technique would work super well for this project where you are gluing separate parts together, but for making waterproof parts I've had excellent luck with vapor polishing ABS parts using acetone. It's normally done to get a smooth outer surface, but since the acetone vapor melts the outer surface into a smooth layer it also helps seal up leaks between the layer lines.

[@jbaby362]

Now this project validated you making a video on recycling ruined prints 😂 enter that den of frustrations

[@MichaelBosworth-y9r]

ive never seen someone so happy about a toilet flushing until now, thank you.

[@adirmugrabi]

having my dad telling you: "you're good" is my life long dream

[@JamesTDG]

In the future, you really need to use a filament that is way less porous.

[@nofunallowed3382]

So this is what unfiltered creativity looks like... So much fun should be illegal

[@bitzbox]

I'm actually quite impressed by the whole flushing mechanism. Very enjoyable and chaotic video

[@termiterasin]

For waterproofing, after gluing everything, paint surfaces in epoxy resin. This is the same method that can be used for medical grade devices (with proper specific manufacturing methods.) I'm curious how functional putting through hole threaded rod to hold everything together would work. Or making your own large format printer with a fat nozzle.

[@jimmon89]

the chaos is of the most superb quality, and the projects are meme-worthy you got a sub from me :)

[@aussie-doggy]

congrats on 400k! well deserved!

[@Fragdemented]

This was utter chaos and I loved it!

[@Aura-Of-Syrinx]

I love the whole vibe, reminds me of the sphere plastic puzzles!

[@splsam8834]

I hope your Christmas video to This Old Tony has gotten you some more subs. You have great content, and your humor has me rolling.

[@slserenader]

BTW for plastic welding, you could also use a line of PLA plastic in one hand and hold it with the soldering iron in the other hand and melt the line of plastic to add extra material if you wanted. Kinda like TIG welding. Its hard to explain but yeah.

[@erinkarp]

This is incredibly unhinged. I'm extremely glad that I'm subscribed

[@nicklasjohansson5154]

I love it when people reinvent something that’s already made

[@Hexscit]

one of many traits of a good engineer is "Creativity" which Emily has beautifully shown to us. many times...

[@lindalautenberger5227]

"Curse you tiny toilet"---vector from the minions suggestion u should have used Nutella for poop for the mini toilet ,just sayin,. 😎👍0 0:36

[@beanwithbacon]

Honestly not a terrible idea to build for a burn. Sure it would probably be destroyed after the week but having your own private shitter is always a bonus.

[@fnfpeople]

1:52 is the most relatable moment I have ever seen on the internet, except im making a rocket plane, not a toilet.

[@greggv8]

Designing a toilet from a basic idea of how the trap works, and winging it without bothering to examine an actual toilet. Leaking problems can easily be solved by brushing on clear polyurethane.

[@zerobatsu]

This probably would have benefited from more study on how a toilet functions.

[@CheezeWuz]

It was in pain, so it killed itself at the end RIP Toilet You were a real one

[@rogthepirate4593]

1:35 is this print speed normal? I only recently got my first FDM (A creality K1, only printed in resin before that) and it just goes berserk on my settings (600mm/s for infill, 350 for the rest). Is that speed what people had to deal with all those years?

[@adamr4740]

This needed to be done-- thank you Emily.

[@IllInformedHuman]

This was fun. My favorite part is how much this hurts the environment 😊

[@RandomKhaos]

This channel is controlled chaos. None of these things should ever exist, but I can't help watching them come to life.

[@aanrudolph2]

I dunno about anyone else but this toilet (minus the bidet, wheels, arm-rests, etc) looks like it belongs in the Museum of Modern Art. It reminds me a lot of Picasso with all of the colors in a "cubist" style. I get the thing was made almost as a joke but it's given me a bunch of ideas for engineering-inspired art pieces.

[@ExactlyThreeBraincells]

This is your first video I've ever seen, and I've been cackling the entire time. Thank you for sending off my 2023 with a high note holy crap lmao

[@Fatty_1000]

this is the best creation i have ever seen

[@3dPrintCreator]

This is one of the funniest videos I have seen this year. Thanks Emily.

[@yan3748]

I just discovered this channel and i think i fell in love with it... what an amazing content

[@mitchib1440]

12:03 is the best moment. Emily: "You deserve one last good flush" Toilet: *dies*