Empire FLO Regulator & JT Ultra Lite Air Tank Review | Lone Wolf Paintball

[@Haydenlegrand933]

Paint balling is so much fun

[@Logan_Golf]

Agreed

[@Nadsenoj]

I am Grateful for the kind review, but side note: the Bonnet for the FLO Pro is actually coated Black Stainless Steel for for thread durability and long lasting performance. A lot of thought went into my design by the decreased length of fill nipple Body and Micro Gauge, and the micro Burst discs to give maximum clearance from those components and the players wrist, external LP to HP adjust ability, to the clocking of the ASA under pressure etc, to it's minimum size.... Note: For reassembly insert the CAM into the FLO Body Nub Side Down holding Main Body vertical "tank threads down", before marrying the Piston and REG Body Tip Assembly into the Main Body Assembly also holding vertical "ASA side down". Both coming together from vertical to horizontal being sure not to dislodge the CAM from its pocket in the Main Body to thread both halves together. If correctly assembled, The Main Body Tip will thread to bottoming out within the Main Body without any resistance and may be clocked backward away from bottoming to the point where the Dog Point Setscrew hole is aligned with its internal mating pocket of the Main Body Tip. If there is resistance, something is wrong and must be un-threaded and attempted to reassemble with the components in the right order. The Dog Point Set Screw should have a very small amount of Loctite applied and will enter flush with the Outside of the body with no resistance. "indication" that there is improper alignment, if the Set Screw is above flush of the Reg Body exterior. Adjust Main Body Tip until alignment can be made between the locking screw holes and their mating hole within the Main body tip pockets. Snug but don't over tighten. I hope this helps, Blessings, Danial Jones

[@detroitpaintball2081]

Those JT Tanks are HOT !!!

[@jacobpoucher]

Ya I can't find a 68 anywhere

[@EKKsoldier622]

For reference, the HK AlphaAir77 (and Non-cerakote Ninja SL2-77) are about a 1/3 of a lb lighter than the 88 (I weighed both at 744 grams, bottle only). That makes those 77's about 14grams heavier than the EmpireUltra 68 (equivalent to piece of candy). The EmpireUltra68 is a couple oz lighter than the NinaSL68, but then the AlphaAir68 is about an oz lighter than the EmpureUltra68.

[@zacharyrobison383]

Do they make these JT ultra lite air tanks in 77 and 68?

[@matthewcorrea4278]

I have mainly magfed markers first strikes operate off of high pressure and my emf off of low it’s gonna be nice to use the same tank for both

[@detroitpaintball2081]

Will we be able to use the H2K Tank tool on the regulator to de-gas the tank?

[@two-bit463]

Stick with Ninja they basically make everyone's reg's my V3 rips

[@DD-jx9jd]

Hk has a better bottle and reg

[@bobspalding2477]

What makes the bottle better? They probably come from the same factory. The reg is debatable. The majority of regs you find on HKs are not better, they’re $30 garbage with terrible consistency, unless you’re shelling out for the Pro v2 so you’re spending $100+ for a “better” reg. Idk about this Flo, but I know Empire makes great regs.

[@DD-jx9jd]

@bobspalding2477 do your research. It's easy to find. Hk alpha air bottle is lighter. The v2 reg is a great reg. Easy to service and to change the output pressures. They might be even cheaper. Take a second and look up some facts

[@bobspalding2477]

@ facts like what, it’s a few grams lighter? HK makes a better reg than empire who’s been doing it 20 years? My “research” is literally experience. HK regs spike like a MF

[@Futuremillionair]

Bruh yall be so nit picky lol acting like a fuckin .1oz is gonna make a difference anything that cost $250+ is worth the money. Ppl be tryna sound so smart all the tanks in this price range are pretty much the same. If there are any difference’s they are minimal and not game changing. Telling someone to do more research is wild like you some type of paintball guru 😂.

[@Peebuht]

Just snagged my Flo reg from y’all a few days ago! Interested to see the action on the balanced flow. Thanks for getting it out quick. 🫡