How To Cure DTF TRANSFERS without oven -FAST -(its not what you think) - KING PRINT

[@FM-wi2jw]

Very nice and U got a big heat press, well baking paper is not expensive...thanks

[@addeesa]

I tried it, and it worked. Thanks for the video.

[@kuzetti]

working smarter not harder I like it and will give it a try

[@mariamcfadden1552]

Going to give it a try cant afford nyhe oven but want to get the filtration system

[@bonnybailey2293]

Do you let it cool a little before peeling off parchment paper?

[@JasmineJMartin]

is this cool peel or hot ??

[@Feedosky]

Pls can I use a home microwave instead of the oven?

[@shanscreations6744]

My ink is coming of when lifting the parchment paper what I’m doing wrong

[@danielletapley6191]

When you press it does it mess it up? Does it last as long as when you cure it in the traditional way?

[@MePhimMeHoatHinh]

Hi, do you apply the powder after printing? before this step? Thank you 🙏

[@debbiepowers8197]

So, you print the image, put the powder on, let sit for abt 20 minutes, put under heat press, use unwaxed parchment paper for 5 seconds and slow peel the parchment paper and then press on shirt correct??? Cause if that is how simple it is I will be doing this! My little oven is not big enough and I cannot get the actual DTF oven yet. Please let me know if I have this correct :)

[@KingPrint]

that is correct

[@royaltee2355]

what dtf sheet are you using? I have a oki printer so my ink is not wet when it comes out. how can I still use the powder with this type of printer?

[@comitosway]

Great video bro! Thanks also what kind of heat press you using? Looks like a 16x20. But let me know make and model plz thanks

[@pixelbat]

This is a great hack, but couldn't you get 2 cures out of every sheet by just flipping it over? Put a 2nd sheet between the used side and the top platen that you reuse over and over to keep any glue from getting on the top platen.

[@KingPrint]

whatever works best for you

[@rbtmachinery_michaelzheng7264]

Great job 👍

[@darnellevans9165]

Let it sit 20 mins with or without the dtf powder before pressing?

[@KingPrint]

After print, give it 30 seconds then hit the powder, then wait about 20 minutes to press

[@Lyndonz10]

Thanks for this tip bro. But ask you how’s the result? Is print good and durable same as the normal procedure? Tnx buddy!

[@KingPrint]

prints are very durable, I would even say it holds its print better that printing DTG straight on the shirt, but dtg "Hand" is better

[@yaminlvddt1]

Dude if you have to let it sit for 20 minutes you might as well allow your heat press to cure for 2 to 3 minutes then. Just put it closer to the transfer paper.

[@khijazi2]

Bro do you let it sit for 20 min after putting the powder on

[@KingPrint]

Yes, just to let the ink "gel" a little bit

[@ashiah324]

Do you add the DTF powder before or after you let the picture sit for the 20 minutes?

[@KingPrint]

Before

[@terrelljonesmusic]

i have same brother gtx and maxx heat press.. what pressure are you using? its it on firm or light, mine snaps automatically so 355 for 5 secs.

[@KingPrint]

I dont clamp it down when curing dtf sheets, just hand pressure, through trial and error when I would clamp HP down, it would ruin print

[@vittovitto79]

@kingprint do you put the powder right away after printing? and then let sit for 20min?

[@KingPrint]

right away while the print is still wet in order for the powder to stick to the print

[@patriciabyers7816]

Is this when using sublimation ink or actual dtf printing? @kingprint

[@KingPrint]

this is DTG ink not sublimation

[@sandorsebestyen8620]

What dtf film and dtf ink are you using.

[@nahdiasboutique2435]

I use ecofreen from all amercsn prints when say thin layer not that thick feeling print

[@KingPrint]

The ink is brother gtx OEM ink, the film is generic film from Amazon,

[@mikeledee8786]

How do you get the white ink?

[@KingPrint]

what do you mean?

[@ggvemini7873]

White ink comes with the dtf ink ❤

[@mikeledee8786]

@@ggvemini7873 thanks

[@certCrazyperson]

( Awesome idea )but I have to say what a waste 😢 just more garbage that can't be recycled, and it may be cheaper but for a short time it will ad up to be more expensive than a Oven in the long term

[@pixelbat]

It's a good hack for people starting out on a budget. Make $$, buy oven :P

[@joemarz2264]

That is the best way to ruin your transfers pal.

[@KingPrint]

works perfectly for me friend

[@agudecar]

It worked for me too, thanks King Print.

[@CarlsGarage]

🤦🏿‍♂️🤦🏿‍♂️🤦🏿‍♂️🤦🏿‍♂️ so many people are sooooo cheap and want to do things the cheapest way vs getting a real DTF set up. Who does this in their house 🤦🏿‍♂️

[@pixelbat]

"a real dtf set up"... bruh, this whole industry is pretty new, it's trial and error, and slapping together what works. Even those 3-5k printers that you probably consider "real dtf" are just Epson innards under the casing. Epson doesn't source their heads to these companies. Literally for ever "real dtf" printer out there, there is a carcass of an Epson printer in some landfill.

[@tisprintcraftstv]

​@@pixelbatdon't mind the nay sayer

[@JasmineJMartin]

@@pixelbat your upset why lol