Рет қаралды 144,875
Hello,
In this video, I added a new feature to my vehicle by making a Keyless Entry & Operation application and I wanted to share the video by explaining and applying all the details for friends who want to do it.
The link of the product I use: tr.aliexpress....
(for X7)
If I can quickly talk about its general features:
* Opening of automatic doors when approaching 1-2m
* Locking of automatic doors when away from 2-3m
* Automatic energy saving mode (after 2 days).
* Keyless one-touch start and stop
* Remote start and stop feature
* The feature of stopping and locking the car back against forgetting (when it does not detect the key)
* Signal alert
* Horn warning (can be turned off)
* Alarm feature against uncontrolled entry
* Door open warning (with quads, maximum 8 signals)
* Locking of automatic doors while driving (for the first brake use after 15 seconds)
* Automatic reversing of the doors after stopping the car
* Tailgate opening feature
Immobilizer ByPass product link is: a.aliexpress.c...
With this application, my Automatic Opening Baggage with Foot Sensor application, which I previously applied to my vehicle, has become more useful.
Video link: • Ayak Sensörlü Otomatik...
* With this connection for manual geared vehicles, you can start your vehicle remotely or with the brake only, without pressing the clutch.
drive.google.c...
* Picture of the clutch switch: drive.google.c...
In the video, I made the connections of the door lock, unlock and trunk lock controls over the relay, and I shared the scheme in the video. If I share it here again: drive.google.c...
* I pulled a cable from the battery into the vehicle and the materials I use here are,
- M8 shoes
- 3meters 2.5mm² NYAF cable
- Fuse holder
- 15A fuse
The product connection scheme is: drive.google.c...
* As you know from the video, I wanted to control all four doors by taking the black / black door signal cable from the ceiling line for the quadrant warning of the module, but our ceiling lights turn on immediately after the ignition is turned off or the doors are opened with the remote control. As such, the product continuously operates the quad signals as a door open warning. Since I don't like it to work in this way, I did an operation other than video later and each door operates this feature independently. I am sharing a diagram of how you can do this. drive.google.c...
Diodes are 1N4007.
Finally, I mentioned in the video that I made the Toyota logo on the emblem section of the remote. I also wanted to share with you what is ready so that you do not mess with the size adjustment. drive.google.c...
If I talk about features I forgot:
* If the doors are not opened within 7 seconds after opening the doors remotely, it locks the rear doors.
* There was an automatic locking feature of the doors and when you open the doors after locking, it locks again at the first brake after 15 seconds.
* You may not stop your car if you want for your short operations as it can lock the doors on the remote control while the vehicle is running.
* I mentioned the first method in the 5:00 part of the video, but if I write the details I skipped,
- Immobilizer bypass module is not required. Just insert the key into the idle reader and tape it.
- The vehicle's ignition socket will not be replaced, it will remain idle.
My car is a 2015 model Corolla Advance 1.6 MultidriveS.
If I write down a few shortcomings I noticed in the module,
- It does not turn off without pressing the brake, but if you press the button while using the brake in motion, it turns off the car. To turn it off, you have to hold it down for 1 second, not instant touch, but I think it's not enough. It would be very logical if he had the ability to read the handbrake information and check the handbrake while closing it.
- Cannot use both smart remotes at the same time. Let's say you got away from the car after communicating with someone and approached with the other remote. You can continue to use it by pressing any button of the other remote (as in use).
- Let's say you opened the tailgate and your job took a long time, because of the open tailgate, the signal of the sensor on the rear window can be interrupted momentarily, so it can not read and it locks the doors and then detects and opens them again.
Yours sincerely, have a good time.
For my other "Vehicle Applications" videos: • Otomobil Uygulamaları