Enabling Memory in an ASUS bios (enabling RAM/DDR4)

Hello,
Here's another quick tutorial video for enabling your DDR4 memory sticks in a ASUS bios. Most of this stuff is for those using an ASUS bios but the principals will apply for other motherboards as well.
I have a kit of GSkillz 32 gig (2x16) 3600MHz DDR4 memory. *NOTE: The ''FCLK' value in your bios should reflect a value of 1/2 the DDR4 memory value. So, in my case: 1/2 of 3600MHz = 1800MHz. So 1800MHz is the value I would enter into the 'FCLK' setting.
Good luck and see you out gaming :)

[@ethanpadilla4255]

This method has fixed my problem till this day. I was very depressed at first seeing that my PC didn't reset, stay on and showed no display. I removed my GPU, switched out ram, remove and installed my SSD, and even changed through multiple wires. Then the last thing that popped out of my head was....the motherboard battery. Once I removed it, clean it with a tad bit of alcohol and clicked it back on, I finally got my display back. After I fixed that issue, I did some research and found this video. Thank you very much man, stay safe out there.

[@phillipmccallister7553]

Wow! This was /is GREAT! You took 3 minutes to explain it perfectly when a lot of KZbin Techs take 20 minutes to show 3 minutes of tutorial. Thanks again.

[@kadethekanadian]

blows my mind you said thank you at the end of the video, we should be thanking you man, awesome work

[@SBLA]

Man I have never cringed so hard at a comment before

[@vince943]

@@SBLA WeirdChamp

[@huevote9474]

@@SBLAreptilian mindset

[@onosteinfels596]

Frrrr

[@Gukaru]

Bot

[@Hatouchu]

Thank you sir! Bought two more sticks of Corsair Vengeance yesterday and had issues gaming; even going to the lengths of installing windows fresh on my system. After a clean boot I still had issues with my games either not loading or poor performance and this fixed my issues!

[@whateverprecisely]

Straight to the point, worked on my computer as of when this comment was written. Thank you!

[@Polaroyce]

When i go back to EZ mode, it shows 3800 for some reason, when i put it to 3600

[@ProfessorTurtleGuy]

great video!! after doing this my gaming fps and all-around performance increased i've known about this setting i wanted it but i didnt know how to enable it thank you!

[@piciukaramell5921]

Bro, my pc doesnt start anymore

[@Norai_1]

reset cmos battery

[@rikatomin7478]

I don't know exactly but my pc wasn't starting too almost 5 hours later(with trying many many methods) found the real issue! Bios is not updated! After updated Bios, OClocking RAM worked very well! Now my Ram are real beast! My suggestion to overclocking with little changes not directly to max level😉

[@Woxked]

Lfmaooo literally me rn.

[@manemjeff9392]

@@Norai_1 what do you mean my cmos battery ive got the same issue

[@xMoRtaLitY]

@@manemjeff9392you ever fix it

[@Fossillarson]

Definitely quick to the point ... thanks again!!! Definitely helped with new build

[@GnomoDota]

Its impressive a video about motherboard BIOS without telling the motherboard model.

[@mennser]

excellently explained, i didn't get lost in this nice tutorial.! Thank you

[@curtist358]

Dude thank you so much for posting this. Completely solved all my crashes

[@Xcreator999]

Thanks. You made it look easy like it should be.

[@binjozoken6055]

Great video. Thanks a ton. I didn't know about the FCLK Frequency settings.

[@RedragonReviews]

Same here I thought just change that thing to 3200 and that was it but it was still showing default ram speed and that was because I didn't change the FCLK definitely worked and a huge improvement

[@GauteAnimationNorway]

My Bios didn't have that setting, but I'm now running on 1600Mhz instead of 1133. I am still on DDr3 😅

[@KingKarlak]

Short and simple. Cheers man appreciate it. Worked perfectly

[@akramasmer]

When i do that my pc keeps rebooting I have b550 tuf gaming with r9 5900x and g skill trident 3600mhz

[@Jacob_W]

I’m late to this video but this is such a simple video for us noobies, thank you so much!

[@Keith4Prez]

Straight to the point. Just how I like it. Great video

[@joemonty2251]

Hi and thanks for the video. Sadly it didnt work out for me, using the Asus TUF Gaming 550 Plus. My 4 memory sticks were shown as 2133 MHz. After setting D.O.C.P. active it was automatically shown as running on 3597 MHz. It set the FCLK, just as you did, to 1800. When returning to EZ Mode, I was shown the memory as running on 2133 again. Below the listet sticks and their details it says D.O.C.P. 3600 MHz. Can you help me with the issue, please?

[@Kley96]

You have to save and reset first. WHen you changed to DOCP exit the BIOS by clicking on EXIT and Save and reset.

[@132arien]

i have the same issue, i have the b-550 pro and have tried with 2x8gb 3600mhz d.o.c.p and 4x8 3600mxh d.o.c.p and it crashes every time, and its the corsiar vengance.

[@theboss9707]

@@132arien i got corsair vengeance with same issue, did you manage to fix it?

[@ElectricOG]

I have the same issue.. mine work at 3200mhz but show in buos 2133 and 2166 i think. Asus b550 tuf pro gaming 32gb 4x8 corsair vengeance pro sl Ryzen 7 3700x

[@Ana-io7nm]

@@ElectricOG anyone find a solution to do this? I also have the Corsair vengeance and showing 2133mHz. Do we all just have faulty rams ?

[@gonzalez4123]

On my bios it’s missing the FCLK frequency. I already had updated the bios before but yeah that’s ones not on there. I’m using a 12th gen intel cpu

[@unknownentity8256]

Is my RAM too old or just doesn't support this? I don't have this "AI Overclock tuner" option in my BIOS? I have the same motherboard, and I'm certain im in the same directory.

[@williameargle8851]

Have you ever updated your bios?

[@RyanEdwards-qm5gv]

My pc isn't starting anymore...

[@AC-130Inbound]

thanks mann.. u just helped a guy who's stupid enough to stay 6 years in 2133MHz speed :(

[@Silenceplz595]

Everytime I change my memory to 3600mhz like it is advertised. Save and exit, it would boot in to save mode and I would have to press F1 to change it back. Do you have any suggestions

[@scotty6892]

Same thing for me but my max is 3200

[@Silenceplz595]

@@scotty6892 I was able to set it to 3600mhz. By reseat the rams. I seat It in the 2nd and 4th slot.

[@vkobi8208]

@@scotty6892 your max is 3200 because that is what your Ram MHz is set too

[@strawberrymochiiz]

So weird, I followed your steps and its showing all setup correctly like DOCP but in non-advanced mode its showing 2133mhz.

[@noblewarbear2490]

Me as well. Have you found a solution yet?

[@strawberrymochiiz]

@@noblewarbear2490 No I haven't and it eventually fixed itself. But I'm back here again because my PC crashed and now it's back to 2133. I went back into the BIOS and just flipped DOCP off and back on again and did the same with the other settings. Without saving........went to save and reset and it says "no changes were made". When it came back it's back to 3600......some weird bug I guess.

[@grimmako4879]

Me too I did the same I don’t understand

[@bamm3967]

Damn me also wtf going on

[@stanleychen6556]

Im assuming u do know the speed of ur ram. But just to make sure, u do have ram that is faster than 2133mhz correct? Im not trying to make you sound dumb. Just better safe than sorry

[@Caspahz]

Thank you for this champ!

[@WithMyDogs]

you got a new sub ! simple and helpful thankyou

[@Dylan_0130]

Thank you so much. Didn’t know about the 1800mhz thing. My 3600mhz ram would only go up to 3200

[@tomiburadomi]

I don't have D.O.C.P. but that doesn't matter when I have XMP 1 and XMP 2

[@ikramshahar44]

When I turn on XMP it does not run the supported speed of my RAM. Should I just put it in manually?

[@ashsofine]

how can you update ur bios

[@BornWinnerCo.]

Why does ur bios look so new? Mine looks like its from 1990?

[@farafin00]

Gilt das auch für 4 x 8 GByte RAM mit 3600 MHz? Habe den gleichen Prozessor ryzen 7 x3700 und bekomm es nicht hin auf 3600 MHz zu stellen

[@CaptGC]

I have a b550m and 2 3200MHz Fury Beast ram.. But I can't OC it no matter how much I try

[@CPXgaming]

Its keep crashing... i tried anything it only works on default and its a ddr4 4800....

[@LuckyYeti]

2133 to 3600???😳 bro does this oc damaged your ram? I have 2400 but OC'ed to 3200cl18

[@lucianohildan3192]

Thats great . Can you make a video tutorial for DDR5 and using fully functional DIMM FLEX (in Bios)? Please

[@MZBallistic]

I don't have a D.O.C.P option? I have manual and XMP ?

[@Usman_Hakimi05]

Xmp and docp same thing Intel: xmp Ryzen: docp

[@MZBallistic]

@@Usman_Hakimi05 Yes. I eventually figured that out.

[@ItzMilla]

I have ASUS but the FCLK frequency option isn’t there? I don’t know if it’s cos of recent updates, but I seem to be missing a ton of options

[@charlesgray107]

Great video man. Keep it up. Helped alot

[@axezz9451]

I can’t see docp :( only see ximp 1 and 2 also when I put 3600 it turns off multiple time and when it’s starts back it goes back at 2133 but my ram is 32gb 3600speed . I’m so confused . I tried using ximp 2 and when I lunch cyberpunk it freeze my screen and I have to restart my pc fully

[@kaitotatsuya]

Cyperpunk is a broken game

[@xUnbroken787]

Mine only shows xmp instead of docp and bclk instead of fclk and yes im using an asus motherboard

[@ethanadams4630]

I tried putting in ddr4 pro 3200 and my monitor won’t turn on

[@covathetech]

Excellent tutorial 🎉

[@poproxxx8287]

2nd video I've watched and still my ram refuses to go to 3600 like specified. 😪😪😪

[@match328]

I don't have the FCLK setting on mine.

[@RichysTheBomb]

My sputtering issue is gone !! THANK YOU !

[@Giatrass]

😢😢 i randomly changed it to 3000 and i have 3600mh and now it wont give signal to the monitor

[@cyb3rgothh]

Thanks so much man! You helped me so much!

[@JohnKreisel]

I don’t have an AI tweaker option on mine, it just says main, advanced, boot, security, and save/exit

[@wilsonsclips_]

Man I updated bios but don’t have ai overclocker… can’t find a fix for this hey

[@2112deadsky]

this was a big help to me to get my ram off 2133 to 3200 ty

[@TorQueMoD]

Awesome video! Thanks so much :)

[@salmande16]

It says docp diabled and not profile 1 pls help?

[@hxcdez4078]

I need help, when I’m done changing my settings it doesn’t let me leave, when I click save and restart it let’s me load then it just makes me go to the home screeen. Plz help

[@TheCoolKidsClub]

my ram is 2666mhz and it set to 2666mhz in my bios but in task manager and the cpu-z it only reads 1333.2mhz

[@Neonzgamingz]

Same

[@TheCoolKidsClub]

@@Neonzgamingz I fixed mine. I just had to update my bios

[@mrcactuar8515]

becasue cpu-z only read one of the sticks 1333 x 2 = 2666. You had it right

[@RYVENANT]

Keep getting posted Safe mode errors, any clue what could be causing this?

[@toufikoualaddane187]

Bro thank you veryyyyyyyyy muchhhhhh you saved my life ❤

[@gabymois3868]

Hello,i have an asus rog laptop and i don’t have Ai tweaker in advenced mode

[@joseurzua7804]

Is it normal that my ram is 3600 mhz but when I’m in ez mode it says 3500 mhz instead of 3600mhz

[@gtsozshwj]

Thank you so much! This video is so helpful

[@loganc1839]

Mine does not have an a1 tweaker option??? Wtf been trying to figure this out for an hour now

[@nekosoul4852]

I have xmp but it’s shows 1 and 2 and when I pick 2 it keeps turning off and on and once I turn it on it gives me a error to change it back and when I ignore it and just boot it up it just crashes

[@MoniqueMartinelli]

Hi!! I have 2 7200mhz ddr5... But when I set to this mhZ it doest start.. shows a orange led and after a long time it starts, but with the factory frequency (4800mhz)... I believe it happens because of the voltage. In by bios shows 1.2v to the memory, but in my memory shows that need 1.45v. do you know where can I change this?? I cant find. Is almost the same motherboard as yours (Tuf gaming b650m ryzen9 7900 ddr5) Thank you!

[@TheDarkTower91]

So you are not "enabling RAM", you are just applying de XMP/DOCP profile of the module on the BIOS.

[@Xaaaain]

I did not find any option in my Asus Tuf F15 gaming laptop. My laptop model is 506HC. Need help

[@RareNine]

You’re awesome man!! Thank you so much

[@manemjeff9392]

I dont have the ai overclock tuner what to do

[@marlin2856]

GOD BLESS YOU DUDE, HELP ME TOO MUCH

[@Orkunmovic]

When i do this setup. My pc wont start up....

[@stealthhunter6998]

Ik it’s been 2 months now but did u get it working. Same thing happened with me I got super panicked but all u have to do is reset the cmos battery.

[@zainnny9622]

i have a 3600 MHZ ram but can i change fclk to 1900 mhz and memory frequency to 3800 mhz using docp ?

[@Ay_Shun]

should i keep the performance enhancement enabled?

[@spyem1]

Cpuz still reads it as 2133. While task manager is saying 3600. How do I know which one is correct?

[@Neonzgamingz]

Same

[@OFFICIALDAVANI]

Any fix on this? Mine is reading the same

[@alexisbrochard6783]

Hey, same for me here, did you enventually manage to solve this issue ?

[@archersterling8707]

did you save and reset? you need to save and reset before exiting otherwise it won't change.

[@Fighter-o7j]

Love u man i got my first pc and that helped me alot

[@kayosznnn]

I don’t have ezmode, all it says is in the bottom right is last modified

[@Stocks_Hub]

Hi guys i need some help! my memory is showing 16 gigs but only slot a2 is showing up on the dram status. I tried to put the ram back in and out and try again but still same issue.

[@rickyshepherdii8146]

My CPU Core Ratio is preset at 42.00 doesn’t give me the auto option should I change it? (running 3200MHz)

[@zaeemwajah9873]

I don't get that option on mine

[@xxxemo7007]

i get stuttering after doing that same board and ram do you have a fix

[@szntez]

When I click f2 it won’t take me there

[@grimmako4879]

If it didn’t work for you it’s because you have to save and exit and need be just load in bios and you’ll see it changed it be safe and good luck people

[@calebtypical9311]

So when I changed Avery thing followed word for word what he said same exact bios layout my computer failed multiple times trying to boot up due to instability could there be something I missed, I’m trying to figure this out as this is my last attempt to fix my warzone game from crashing my computer

[@DrionskiA]

Just wanna ask, is it worth it to do this on a TUF B450M? Can the board handle it? I have 2x8GB Ripjaws V 3200

[@shashi15151]

I'm not getting option of fclk in my mobo bios it is asus b450 f gaming 2 ram is 3600

[@hypeervr8824]

I dont have profile 1 or ai overclock tuned

[@slfinal6708]

Thanks bro 🙌🏻 you are the best 🔥

[@thejworks07]

What is my Bios doesn't have the A.I. tweaker tab

[@Ashzelot999]

I just got two sticks of corsair vengeance Pro and I put them in my PC and it started but I got nothing but a black screen on my monitor. I was told I need to update the bios for configuration and set the timing and I have no idea how to do that someone please help!!!

[@namorenamost4429]

Dont have that option overclock tuner

[@KevNeffect]

Thank You! Helped a lot!

[@boxed-by-zracky1696]

I don’t see Ai over clicker on mine

[@tini971]

I have a Question i have only 3200Mhz Ram and when i put the same Option it shoiws D.... DDR4 - 3597 and some numbers.. but, should i change the Memory Frenquency to 3200 or a bit under or let it on 3600mhz and this is overclooking right? I dont understand this (sorry for my english)

[@tinhvanhoa912]

Hi i dont have the AI overclock tuner option, the list starts at SB Clock spread spectrum. Do you have a solution for that ?

[@UmmeRuman-tt2qe]

My PC configuration is: Processor: Ryzen 5 5600 Mobo: asus tuf gaming b550m-plus Ram: Kingston fury beast 8gb x2 3200MHz dd4 Storage: Samsung PM9A1 512gb Gpu: sapphire pulse rx7600 Psu: corsair cv650 80 plus bronze Even though the CPU and motherboard are both compatible with 3200MHz frequency, I can't take advantage of the 3200 MHz of the D.O.C.P (X.M.P) profile. If I turn on the 3200MHz option of the D.O.C.P. profile and save, the computer restarts itself and goes to the boot menu on its own. The PC does not turn on until I go back to the default mode from the D.O.C.P Profile mode. What is the solution to this problem? Do I need to update the motherboard BIOS? Or am I not able to set the DOCP profile correctly?

[@yojay_buggin5393]

I don’t have a ai over clock tuner in my ai tweaker

[@muszek864]

thanks, everything works perfectly !!!!

[@RedragonReviews]

I have 3200mhz and I put my fclk to 1800mhz never seen any issues but your video the second I heard say it goes to 1600mhz so I'ma set my fclk to 1600mhz just to be on the safe side

[@luisvoronov]

Hi guys, on my Asus tuf gaming x570 pro I do not have the Fclk frequency, my ram does not go UP to 3000 mhz. What can i do?

[@aesir0784]

How do you enabkev32 gigs from 16 gigs, shows all 4 dimensions, but still says 16gigs not 32?

[@fortniteguyyyy]

can i not do this with ddr3

[@factorbfh4558]

can you or someone help me get my ram / motherboard to post to 4000mhz i can get it to post with the DOCP or this trick