Honestly, I didn't know that Dan and Mitchell even had normal jobs at the shop. I thought all they did was make circles on water jet.
@rickharvey47272 жыл бұрын
Literally my exact thought. Dan and Mitchell do actual work?!
@potatopotato91312 жыл бұрын
Yeah they make knife blanks, even better than circles
@AstrixCloud Жыл бұрын
Lmaooo that made me laugh probably more than it should have.
@PatrickAdairDesigns2 жыл бұрын
I love how of all channels it’s Waterjet Channel that’s creating groundbreaking techniques for resin projects 😂 Keep it up guys!
@WaterjetChannel2 жыл бұрын
I’m just as shocked as you are
@weld42002 жыл бұрын
@@WaterjetChannel were the other guys go ?
@jamesonhardy21262 жыл бұрын
Good to see you again Dan
@spartankongcountry67992 жыл бұрын
"Why's it so milky, what'd you do to it?" Dan is 100% going to do something to you.
@wingedfish11752 жыл бұрын
It's really staring to feel like dan and Mitchell are becoming secondary charecters
@adventureswithdavedave2 жыл бұрын
I was glad to see some Dan this time
@DanielHaug2 жыл бұрын
I think you should use a pressure pot. I think that would be a good idea.
@WaterjetChannel2 жыл бұрын
Good thinking
@SteveEh2 жыл бұрын
I'm really surprised no one has mentioned this before.
@matmorise55182 жыл бұрын
Screw resin, this channel is called the water jet channel. That's what was great about this
@coledaly79052 жыл бұрын
im fine with this being the resin channel now, as long as its a bunch of relatable dudes who makes scuffed projects
@ryangogle2 жыл бұрын
Hey guys! I used to work in the hotel and food industry when we had to create displays with food we would paint the food in aspic gel which would essentially preserve the food and make it really shiny. You could try using that prior to dropping in resin. Thanks! Love the channel!
@SD-oi9gr2 жыл бұрын
Your growth in resin knowledge is pretty impressive. The speed you have gained ability usually takes so many projects but your mix of expert advice and brute force until it works is great.
@AstrixCloud Жыл бұрын
It's resin.. there is a wealth of knowledge out there so it'll be easy to learn fast.
@paulosborne65172 жыл бұрын
Now we know where Dan has been all these weeks - bullfighting in his figure-hugging little ginger toreador jacket!!!
@brighamruud50902 жыл бұрын
Toreador march is a great song especially on a music disk;)
@potatopotato91312 жыл бұрын
Glad to see Dan make it in a video, though ‘Niel has been doing a great job with these videos lately
@DanVR0012 жыл бұрын
They're the resin channel now. I'd like to see some raisins in resin.
@Nairod22 жыл бұрын
Poor Null I feel like he is the guinea pig for anything that is going to be painful or tedious in that shop.
@juxxtapoz2 жыл бұрын
Probably should have just used Original Pringles. The acid in the vinegar might have had a reaction with the resin causing the cloudiness.
@rickmendoza17052 жыл бұрын
In another episode of "the resin's channel". Does the resin taste like pringles?
@jeremyzackandlucas2 жыл бұрын
@Waterjet Channel _Come on 1 Million Subscribers! It won't be long now! My 2 sons and dad (myself) love your channel!_ *Thanks* 👍
@ainsleycox83732 жыл бұрын
This channel has become - that derp encasing greasy stuff in resin, plus some water jetting at the end. I’m not complaining though.
@longboardinglee46752 жыл бұрын
Mold release spray would be your guys' best investment for resin projects like this
@MaNNeRz912 жыл бұрын
Resin actually burns better than I thought it would 😆😆
@powderedwater47422 жыл бұрын
Now we can finally see whats actually going on inside those cans
@Christian-cz9bu2 жыл бұрын
Glad to see Dan is finally out of rehab (again.) ;)
@danielpirone80282 жыл бұрын
The dirt on his forehead is delightful
@androgynygoat2 жыл бұрын
Immediately I am reminded of how cursed the simplified pringles mascot is
@derhugo01352 жыл бұрын
i think this is the first time in the history of the channel where we actually saw the guys do actual real life work
@leejarman8720092 жыл бұрын
That one felt smooth. Keep this format!
@thomaswalker22912 жыл бұрын
Welcome to the resin channel
@tracybowling11562 жыл бұрын
How much work did you get done that day you painted all of the Pringles individually with resin?That Sir is dedication!
@coreycarpenter24892 жыл бұрын
Waterjet Channel - Top effort for the weirdest shit.
@omni_mtb32102 жыл бұрын
I like that I have the same welding helmet like the one seen in the video!
@WoLpH2 жыл бұрын
Welcome to the resin channel! Where we spend most of the time creating resin casts and a few seconds of waterjet cutting. Not that I'm complaining, just saying
@tsm6882 жыл бұрын
Can we start cutting things in half again? A hydraulic spool maybe - one of those complicated hydraulic computers that controls things like excavators.
@jonsprouse67592 жыл бұрын
I have always subbed to this channel foe the two guys. They are so funny to see joke around and the water jet stuff was pretty cool. Not really a fan of this new person who has been doing more and more just him and resin
@adventureswithdavedave2 жыл бұрын
Glad to see some Dan this video
@anthonyorourke99992 жыл бұрын
The years I have been watching your videos and I have always wanted to know what you do there. What do you really cut and make there? What happens way in the back that we can't see? What are your jobs? Who else works there and what do they do? Who is Creg (the boss, the owner)? Basically the in and outs of the workshop.
@SentinalSlice2 жыл бұрын
Welcome back Dan! Love the crop top!
@tylerschneider60712 жыл бұрын
like how you guys made an end table out of the pizza, i think it would have been cool to make a lamp out of the pringles to sit on the pizza table, great video nonetheless
@elenatedder85482 жыл бұрын
I honestly thought the bowl of noodles you guys slipped in there was some horrific maggoty mess lol
@vm3mm3mv292 жыл бұрын
1960's: I think we will have flying cars in 2022 2022:
@everythingeverett30212 жыл бұрын
Thanks for making a great video!
@xLazarusEnvy2 жыл бұрын
Fuckin LOVE this channel haha never clicked so fast, also glad theres more NUL in the videos.
@TheoddLedgend2 жыл бұрын
You guys can try stacked lay's chips if you decide to try it again, I believe there is less grease in them than there is in Pringles.
@Vault572 жыл бұрын
4:13 What he did was probably using the vinegar and salt chips. Vinegar has acetic acid and the sodium chloride along with whatever oils from cooking the chips are probably clouding the resin. Skip the flavored stuff and eliminate potential interferences. Fun videos as always 👍
@user2552 жыл бұрын
Yes, use those salt & oil free chips.
@SentinalSlice2 жыл бұрын
I think this is now the resin casting channel.
@BarelySentientBraincell2 жыл бұрын
1:38 That's the new variation on 4chan /mlp cumjar project. Pringles can. And it solidified. Everyday we stray futher from de wae.
@armstrongslastnut25322 жыл бұрын
Helllllllll yeah! Neature walk reference at 2:35
@manicoptio93052 жыл бұрын
Im missing you throw stuff up the wall
@gremlin602 жыл бұрын
crying here... seeing pringles getting destroyed like this..RIP
@rasmusrasmussen94152 жыл бұрын
Have you tried using some clear coat spray to prevent the Pringles from getting like that?
@Maccoye2 жыл бұрын
Mitchell goes full Rambo mod !
@Floortile832 жыл бұрын
Nyuntl really good on channel
@8BitEggplant32 жыл бұрын
hoooly shit i wasn't anticipating seeing a Neature Walk reference in the funny plastic chips video
@CyclingSteve2 жыл бұрын
4:13 big Lumpy Space Princess vibes.
@celestinotorres61062 жыл бұрын
You should actually create a candle with Pringles
@youtubeSuckssNow2 жыл бұрын
Wait. Were they *actually* doing work? I didn't know they actually worked there
@jakeortwein21372 жыл бұрын
Seal your mold and turn it upside down if it’s floating, basically sinks to the bottom visually
@Lilyofthevalley2522 жыл бұрын
you guys need to give up your epoxy resin privileges
@StupidRobotFightingLeague2 жыл бұрын
ART!!!
@ajsantillo52882 жыл бұрын
This is so weird...I am literally eating Pringles when I got the notification for this video lol
@fire_queen17642 жыл бұрын
Might have got the Pringles right the first go if they weren't salt and vinegar. The vinegar might have been the problem not the salt....
@dustinhalat24842 жыл бұрын
I wanna see y’all turn that on the lathe
@jasonanderson_PA2 жыл бұрын
Was Dan doing real work? I’m confused.
@UncleKennysPlace2 жыл бұрын
Do a "sleeve" of golf balls, and tennis balls.
@SteveEh2 жыл бұрын
You should cut the clear one into a hexagon shape around the chips
@manlylego2 жыл бұрын
It hurts my soul to see those pringles encased in their epoxy tomb
@bobbygetsbanned60492 жыл бұрын
This might sound crazy but hear me out. I think you should use a pressure pot.
@donald64272 жыл бұрын
😂 these guys crack me up
@elmadicine2 жыл бұрын
Strevor is really coming into his own making these ridiculous resin project videos lol
@Kurogane-san2 жыл бұрын
Can you show us all the things that you've put in resin of cut in half?
@cncgeneral2 жыл бұрын
I don't know why you didn't like the first one, I always have a tube of pringles with milk for breakfast, it's delicious
@woofy19882 жыл бұрын
5:24 I am more amused that my comment was one of the ones chosen for the video than anything else
@littlebacchus2162 жыл бұрын
Is that a set of them amazing RAYCON ear buds at 4:09 I hear they have the superior sound quality of top name brands but at a more affordable price.
@amcstryker72 жыл бұрын
Long shot but during the first 30 seconds I see that knife poster. Where can I get one of those?
@theIargedude2 жыл бұрын
finally, a reason to buy salt and vinegar
@arthurneddysmith2 жыл бұрын
Don't they have polishing belts for the belt sander?
@seasonedpudding1942 жыл бұрын
nice
@ThePerfectKiosk2 жыл бұрын
So is Nyül the dedicated resin guy?
@raulet462 жыл бұрын
The resin chanel jajajaja
@jakeandrews1662 жыл бұрын
Some how I can smell the Pringles
@Qinglin8882 жыл бұрын
Why are you touching uncured resin with bare hands?
@nunyabusiness85382 жыл бұрын
i miss dan
@SnufflySpy2 жыл бұрын
Glad they didn't cut the good one
@bens68132 жыл бұрын
Epoxy resin channel.
@SD-oi9gr2 жыл бұрын
When are you going to replace the water jet lines with resin and try to cut things totally destroying your crazy expensive machine?
@legitscoper32592 жыл бұрын
Did they got smaller ???
@haphazardprism2 жыл бұрын
0:04 Macho man Randy Savage would have been pleased.
@jactuscack61962 жыл бұрын
I ate a chicken fried steak, mashed potatoes, gravy, and green beans in the amount of time this took.
@artonline012 жыл бұрын
My guess is that it was the starch from the potatoes that leached out and made it milky looking.
@brandonb94522 жыл бұрын
0:56 he’s lost weight eh? Looking good Mitchell
@ITroopTheSpace2 жыл бұрын
Can I ask what happened to WestShop?
@edwardgoldthorpe82602 жыл бұрын
Are we going to talk about the hair at 6:35?
@marandazilk31752 жыл бұрын
I did buttered popped corn in resin. It didn't work out.
@legitscoper32592 жыл бұрын
Haven't bought Pringles since they changed their icon
@kenthepen52702 жыл бұрын
Water jet vs hydrophobic object when
@HChandler20102 жыл бұрын
Polish resin with a torch, it's so much quicker
@cigie45752 жыл бұрын
Thank u
@Maxloader2 жыл бұрын
Try using candlewax instead of resin to make a real pringles candle!