Engine Location

[@strick189]

I enjoy the way Tim explains the info in his videos. No sugarcoating straight to the point.

[@ronsmith7739]

I can see understand why these short videos, with so much information one would have to analyze all this info one has to take one item at a time. Thank you very much.

[@ernestquinones1898]

All i have ever done is simple bracket racing..but i am hooked on your videos the knowledge that you have from doing this for so many years just amazes me.. i appreciate the time you have taken and all the videos you have done breaking down every section or step it takes to build not only a quality race car but also a safe race car it make sense how everything you do is to most importantly keep the driver safe in his office how you cut no corners and also how important the little things are in a race car thank you again Mr. McAmis for your knowledge and the information you share even with me just a weekend warrior.

[@danielbrealey2924]

Can't thank you enough for your series and sharing your knowledge, Tim

[@victortrense5640]

Same

[@rodwright225]

Thanks Tim , love that giant air pump on the front 😎👍👍

[@zachrossi3590]

“You guys can figure this stuff out” Tim, I think you give us a little too much credit lol

[@brianslicanderson3240]

Tim you probly have forgotten more than we all know collectively! I hope you document this vast knowledge for safe keeping! Tyvm

[@app6072]

I'll never build this type of car in the UK but how professional he looks and the 'and all that bullshit' love this guy

[@ldtenenoff]

Tim thank u thank u fer making incredribly important stuff understandable really have learned more since watchin u on youtube just love vids alittle humor with a shit load of technical stuff fer the most part drag racing is alive and well thanks to folks like you keepin folks SAFE while at play.

[@otisbailey5455]

Thanks good info and guidelines, especially on the factors you can control.

[@TrojanHorse1959]

Great video, thank you for your time and efforts!

[@bretlambky]

As always I really enjoy and appreciate your time and knowledge 👍👍

[@hedgepethracing9590]

Tim What's the smoke sign for motor placement?? Thanks for all the videos, your the best and give your knowledge away for free, all we gotta do is put the work in.. Jesus thank you!

[@z06doc86]

Tim’s the man. Knows his shit.

[@anetworkservice]

Good info and planning guide recommendation. Thanks for another great video, Tim.

[@mattminnich3886]

Just got turned onto your channel.love love love the videos....love the work

[@davidbrown6193]

Hi Tim, love the videos! All incredibly specialised knowledge and experience to know the application. So interesting, makes my imagination soar! 😄Thankyou. All the best 👍🏻👍🏻

[@lknanml]

When you think you have a good SC setup on your car then you see this..... Love this channel.

[@youtubestolemyhandle1]

Thank you for posting. Always learn a lot from your videos. 👍

[@ryno6101]

Always great information I suggest you put a price on your web site for the service of any of the many questions you get , it would come with a model fill in the blanks with customer information for their particular need like engine placement Just sayin-Keep it going you are helping a lot of people anyway

[@dennybowman2641]

Makes sense, I'm just getting my feet wet on this going straight thing. Have been around circle track my whole life, wanting to learn all I can, Mr.Tim thanks for the geometry lesson. Maybe one day call some of these big dogs out if I hit the lottery lol

[@fredrichards5928]

Denny Bowman same here bud!!! Definitely a lot that goes into it

[@dennybowman2641]

@@fredrichards5928 yes sir it does. Have learned alot the past few years, even got to haul the shadow 2.0 back from up north and met mr.phil, it was quite humbling.

[@GFPRACING]

what is better pro charger 0r twin turbos when you add up all the weight of all the parts of both witch weigh the most . thanks

[@wheels2199]

Thanks Tim, answered my question.

[@markshaw3219]

Great info Sir! Thank you!

[@GFPRACING]

were do u put the level . I all ways put it front to back were the intake Seals go on the block . I seen others put it on the carb pad on the intake . but i all ways felt it should be put on the block . most intakes r raised higher in the rear . by putting the level on the block . the carbs are level under acceleration

[@prostock007]

Thank you for sharing your wealth of knowledge Tim! Amazing channel!

[@MrElPoderozo1]

Now this is some good information, thanks.

[@1darryloflife]

Manufacturer of factory cars always installed the engine into the engine bay so the front of the engine was higher than the back of the engine block. The engine block needs to slope from front to back. The reason for this was so that the coolant, being water based, when the water portion turned to steam, was able to migrate to the thermostat housing and into the radiator.

[@fastone371]

As long as the fill cap is the highest point the cooling system will work just fine. The real reason OEM cars have the block higher at the front is the same reason these drag cars are mounted higher at the rear, to get the output shaft pointed at the pinion CL. OEM cars = high crankshaft CL (12"-15") and small diameter tires, 27"-30" vs drag cars with low crankshaft CL (8"-12") and large diameter tires = 33"-36".

[@hicksdiesellife9042]

What about on a cummins any help ??

[@johnmelton7877]

How about a front to rear weight percentage number to shoot for?

[@Timmcamis]

There are too many combinations, intended racing type, set-ups, etc. to give a general range in a single video. We can possibly do one that is typical on a standard NHRA Pro Mod set-up, but if people are interested. However, that information won't be useful for 98% of racers out there.

[@johnmelton7877]

@@Timmcamis Thanks

[@Rendezvous70]

Ok gota ask whats with the " steel block " reference.? Is this another case of calling a flex plate a flywheel?

[@arthurtabuchi7760]

Thank You Tim !!!

[@gabosuper96]

Can you talk about suspension? I'd like to know how can NoPrep cars put so much power down to the track

[@flyonbyya]

Although I know it would be almost impossible. Be nice to be able to adjust the engines 3 axis’ position, like you can the rear suspension set-up

[@joshuahermanson7636]

What hemi is that?

[@reallybadaim118]

I learned more on this topic in this short video than anything else.

[@hillarylevenworth8824]

Love this guy!

[@KobaBlack113]

What’s the car in the back with the cover on it?

[@taylor_imaging]

Black a secret

[@cajunmandick2985]

Well said tim

[@thesquirrelchroniclesakare7808]

You lost everybody when the numbers came out of your mouth. Not me. I got ya bro ! Thanks for the info !

[@brianslicanderson3240]

Thank you so very much btw!

[@KSIXRIDER]

Thank you Sir!

[@Hoppysjunkyardrally]

Him: We have to move this hemi to the rear of the chassis.. Me: How come? Him: Because PROCHARGER.. 😲Do you see the size of that thing??? Daaayaaam.

[@Hoppysjunkyardrally]

@Jim Jon ain't that the truth!

[@funfun8095]

F3X-140mm! ;)

[@jakevalent6180]

every observable thing in this video is eye candy

[@bbbiesemeyer1]

I’m dead asf we get emails phone calls text messages 💨 signals all kinds of shit.😂😂😂😂

[@stevesolo16]

Boost Big Block chevy track testing

[@larrynorsworthy8582]

Anybody ever done a straight 8?

[@robh9577]

Thats a big hairdryer you got mounted in there....

[@TrojanHorse1959]

Yeah, I guess you've heard of the "Bug & Bird Catcher" top mounted blower fuel injection systems? Well this here is the "Cat Catcher" because it's down low and I'm pretty sure a cat would fit in there...Lol!

[@MotoKingWOT]

The supercharger is the same size as the whole engine!!! 😳

[@ironfistvail]

holy fuck ive never seen a procharger that big

[@tannercox4537]

That supercharger looks like Larry Larsons turbo😂

[@jamiecunningham6540]

Tim I am

[@BigChief405]

finally!!! Mid plate myths exposed!!!!

[@billharriss4463]

Justin, Exactly what mid-plate myths were exposed?

[@thomasdaddio741]

Sell me the crow !!!!

[@GFPRACING]

As All Ways > The Very Best ! ! ! . . .

[@danielsmith-ze3wy]

✝️🇺🇸👍

[@EASTCAMDEN4LIFE]

That turbo looks too small. 😆

[@taylor_imaging]

Need to take that block down to fran and get it fixed. Is he even alive still? Lol

[@neilpuckett359]

Monstrosity that is definitely the word.

[@benbedgood3086]

Ppl giving us shit lol

[@benbedgood3086]

First line