Best 3D Printing Ideas in 2022 - 3D Printed Trends (Part 2)

[@1Darkmouse]

Loved the editing, but the printing ideas felt like a waste of filament - most items seem quite impractical for real life appliance and only good for single-use entertainment.

[@ademord]

same lots of crap here

[@mikehen06]

The best part of this video hands-down is that the batteries are all turned the same way. My OCD thanks you for that.

[@Nameless-..]

I honestly can’t wait to get a 3D printer, I don’t really care to build super big projects or crazy stuff but to learn and create things to help with everyday stuff, I definitely want to just make art for my Gaming room as well as around the house to add some authenticity

[@thecateatingasian]

did you get one?

[@mitchellvolcano]

@@thecateatingasian i think he did but he didn’t get the notification and i just ordered an A1 mini

[@SugarCoatedSmarty]

How's the A1mini? I'm debating it atm for wall mounting stuff and around the house items.​@@mitchellvolcano

[@vick7172]

Hey..you’re using a dry wall screws to mount the 3D printed things. You’re also using a drywall setting bit (used to prevent the screw from being screwed too deeply into the drywall.

[@orifxonhotamovhayotivaijod5326]

Qoyil shunaqa uzbek yigitlarimiz borligidan hursanman. English tilida kontent tayyorlash prosta respect.

[@Kady3DPrinting]

Very good items

[@dmakhkamov]

Great to see an Uzbek guy to reach this level! Bosing!

[@DmitrySholokhov]

Massage tool usage had me laughing :D

[@tonette_grace]

HAHAHAH me too

[@morphiz]

I know how much work and effort has been put into this. Good job!🥰👌

[@user-fj3gt2rj4e]

What was the chemical you used at the very start bc i usualy struggle geting my prints off the same bed

[@adroziy_live]

very well. amazing. thankyou for hard work

[@davetriesthis]

Do you have a video of just the SD card holder? Would love to share with my photo-centric viewers. Also I have to figure how to modify that for CFE-A and CFE-B cards which I now have a lot of.

[@HuFlungDung2]

How useful is that really? Be better if you added a business card size slot alongside to add a label for each card.

[@funkdaddyflex]

I think it would be cool for Nintendo switch games

[@davetriesthis]

@@HuFlungDung2 Well I have four CFE-A cards and two CFE-B cards, so having a holder for those would be handy.

[@thortaub5464]

The device you made so that you could sit on the couch And have a cup there reminds me of that thing so that babies don't spill cereal everywhere

[@jasonproulx1231]

He's taking all the red tea !!!!!!

[@ForTheEraOfLove]

books and humidity don't mix 🚫 and neither does PLA and food safety

[@nikm5628]

Dude... That "massager" is a weapon 😂

[@thebuzzbeekeeping3589]

The best cool Prints

[@smallthings1984]

I'm new to 3d printing. It's so much fun. Sub.

[@mohammadhoseinkazemi4797]

You are the best Man

[@creative3dstudio779]

Assalomu Alaykum. Qoyil, ijodizga omad. O'zbekligizga hayron qoldim😮❤❤

[@zillpatel201]

No lie I would actually use some of these contraptions pretty cool!

[@h.montgomery]

hello, what trick do you use to show an accelerated print with the printhead out of scope?

[@headphonedog3180]

i think they have a tower in the corner of the plate that the printhead goes to every layer and simply take a photo of each layer of the main print when the printhead moves away to do the tower

[@workinprogress9483]

i am in awe of your spring collection

[@chandanraj5778]

Hi, which 3d printer is best with high accuracy?

[@jeditor8960]

Really cool

[@PrintedNZ]

thanks for the idea

[@0ne_fa]

Thanks i'll use it for my new videos

[@MATRIXISREAL-rb6gj]

what are you spraying on the build to remove it easily?

[@UzLooKsiZ]

Salomn oka yahshimisiz maslahat berolisizmi qanday modeldagi printer ogan yahshi

[@AdobadoFantastico]

The pen launcher made me chuckle.

[@nano7586]

Damn this is so satisfying to watch

[@meharbankhan9203]

Can you tell me what camera and lighting you used it with?

[@audreybossman8369]

Thanks a ton! Fantastic set of prints. I'm printing the Parametric Battery Box now because I have been looking for a fantastic solution to my plethora of batteries. Just downloaded the Gyroscup files because that is just super rad. Update: The Gyroscup is fucking amazing! It was a little tight at first, but a quick zip zip with a 1/4 drill bit and now everything is free floating. It works like a dream.

[@flo0079]

Great video

[@DeanNutz]

Im new to printing, what ever app you use to make this stuff is it user friendly? I dont want to get a printer an cant use the software lol

[@antoniocardenas4678]

What kind of material? Is it toxic?

[@purvislewies3118]

i have a ender3 v2 and help with the settings,bed and print settings

[@KevinMilanFranando]

Super camera angles bro

[@mohammadhoseinkazemi4797]

You are the best

[@mazzzavaley349]

uzbek inson kilgan ekan bu videoni, baraka topsin, meni fikrimcha agar plastik shtamplar ishlab chikarishni yolga kuysa shu printerda ancha pul topsa buladi, salomat bulinglar!

[@Tylox-7]

The pen launcher is my childhood dream

[@jstipsits60]

what are they spraying on the plate?

[@traceurAlex]

0:31 what did you used there? 👀 Air spray to cool the bed? Wd-40? 👀👀

[@engineericly]

It is Super Glue accelerator

[@webpro607]

11:52 can you please tell me what filament used here? Very beautiful..

[@NarcissistRecovery]

What printer is that

[@MarcoCesenatico]

Hello, you are a grown-up, which silk filament do you use?

[@beimarticona8895]

20:30 That's really cruel

[@JaredC4]

What is the name of the tool used here? 0:42 for scraping the edge

[@zedmongames2096]

deburring tool

[@SiqmaRobotics]

Cool.

[@kjadskcn]

Could someone tell me, if these projects work equally well with Resin printers, Thank you.

[@mohammadhoseinkazemi4797]

Very Nice

[@tripax3d363]

Hi where do you buy your lime please?

[@EnergiZeScuba]

"for your fingers" suuuure :D

[@adikaliborder1007]

Мир тебе и твоему дому! Спасибо за качественную подборку!

[@nishita3753]

Can u please provide the video procedure of making of thumb saver.

[@ThePooTubeChannel]

What software is that

[@JuzziKing]

Where i can get the design of the wallet showed in the video??

[@CrashPro1]

Thumb saver is really awesome and definitely going to print! But it's too use on someone else, hence saving your thumb from the pressure 😆

[@CrashPro1]

BTW, you earned a sub! Love these designs and look forward to more.

[@Moebius_84]

Hola, de casualidad estan para descargar?

[@daniilkrivonos1157]

How do you clean your printing bed from those marks?

[@maximilianoscilingo4738]

Amazing idea, you have the stl of the inner ring updated of 26:30 minutes? Thanks

[@UriyZ9mb8e]

i also would love to see this. if i find it i will paste the link here

[@Superarabr]

What Is The Printer With The X On It

[@IcxnicCloud]

Guys My Tech teacher in middle school and I were talking abt 3d printers when he said this is something that really matches you he sends me a mail where you could apply for building a 3D printer by now 1st day passed of building I am 190% of what we needed to make this week it’s really fun and I’ve seen it in action works like a charm so if the wallet at 7:04 is PLA I’m making it for sure when i finish building (11th of march 2024 is exam so basically the ending) Could someone tell me if 7:04 is pla

[@276matto]

Teas from my country 😍Turkey ❤❤

[@gabrielpindo1198]

Thanks for this video! Greetings from Argentina!

[@mark897]

Mit nem normalen Bett, oder einem guten Boxspringbett verrutscht da nix. Da kann man ja auch gleich auf ner Luftmatratze schlafen, die rutscht auch nur rum. Und mit nem Zirbenholzbett bewegt sich im Schlaf fast niemand mehr. Reinlegen, einschlafen und völlig erholt in der exakt gleichen Position aufwachen, in der man eingeschlafen ist. ❤

[@goilo888]

WTF, did you even comment on the correct video?

[@haugenx]

Can you share your settings used for the wallet.

[@jaggercarpenter]

what website do I go onto to download the Gyroscup

[@muhammadkarimovb]

Ruxiy tarbiya digan kitobdan bildim admin uzbek

[@engineericly]

:)

[@azizmamedkulov7465]

Doppidan bilmadingizmi?

[@johnmason5607]

I really like your time lapse shots with the clock

[@rabboniyustozlar1303]

Mashaalloh 👍 Alloh ajrizni bersin birodarim

[@SurriDev]

2:40 ended suddenly

[@serenedaoud]

For the attachable cup-holder, the heat from the cup would melt the plastic.

[@biccsdev]

love how you are using playboi carti mixes as bg music

[@3.14_am]

21:40 Mind blowing solution: Cloth bag🤯😉

[@goitiaquispemichaeloscar9287]

cual es el programa que usas para diseñar?

[@Valentin-oc5nh]

pistaccio opener i would buy!

[@craftingwithus917]

Ajoyib.Siz qanday material ishlatyabsiz

[@omarhamzatg8833]

Hello from Algeria this invention is wonderful how much do I want one 😊

[@dr.xx1]

Great channel, i have anycubic mega pro, i can't wait to start with my new projects 🥰

[@colinnowak2832]

0:42 what is that scraping tool I got to get one of those.

[@jaume748]

Hi! I loved the tool that you used to clean the piece at 0:42. Could you please send a link or name it? Thanks

[@jaume748]

for those who are still in doubt: is a deburring tool

[@kozuch2710]

Go with karambit keychain spinner, viewers will love it

[@michaelmain2557]

can you put the dimensions and other stuff to print the wallet

[@VaughnCampbell]

Where did you get those plastic bags? Would love to find some of those up here in Canada....

[@Pisto48]

Which software do you use to desing ?

[@engineericly]

Fusion360

[@paladinew]

Wow, really incredible job! On your Aquila, what are you using to keep the glass bed down? I didn't see any clips... Thank you!

[@engineericly]

I use some black clippers with threads, take a look closer :)

[@mavlonovoybek73]

shu narsalarni ishlab chiqarishni yo'lga qo'yganmisizlar?

[@eresalgo21]

your print are awesome!! did you mod the firmware of the voxelab aquila?

[@tiktok.explore]

Printer name?

[@Aandrwsilva]

love you

[@ShashwatKumar]

Whats the screw size used at 17:29

[@Gjjjj12]

Bro keep going

[@DullestMass11]

what is that stuff you spray

[@engineericly]

Super glue accelerator

[@harikriz369]

Wow .. really nice . .!! May I know which camera you are using for your studio ?

[@engineericly]

Hello, as this video includes several footages in 2022, these videos were recorded using Firstly Redmi Note 10 pro, Sony ZV E-10 and Canon R5

[@harikriz369]

@@engineericly Wow great !!! Thanks ..

[@Bmerchin]

I’ve never seen someone take a blowtorch to remove a print from a build plate before. I have questions 😅

[@haostamping]

Good

[@jeffreytackett3922]

I'd like to meet the person who has 24 full size SD cards, these days.

[@bikelifegmx]

I keep the mini ones inside the big ones so i dont lose them 😊

[@elsocio9113]

GRACIAS AMIGO

[@Guhhhhhhhhhhhhhhhhhhhhhhhhhhhh]

At what layer height did you print these, they look so smooth!

[@urgamecshk]

0.1-0.16 look good. 0.1 is essentially flat