Engineering Drawing | Projection of Planes - Hexagon Problem 03 | Learn with Nikhil

[@thinkingmonkey3290]

An idea inspiration for my dream house. Thank you

[@pluffy53]

A regular hexagon of side 30 mm has one of its sides inclined at 30° to VP. Its surface makes an angle of 60° with the ground. Draw its projections

[@MohamedFofanah-ty9zo]

Thank you so much for your clear and top-notch explanations on this topic-they’re easy to understand and highly effective. This is truly one of the best videos on KZbin for projections of planes clarity.

[@LEARNWITHNIKHIL1]

You're welcome!

[@maharajstatus3386]

It's great Sir thx ❤💌

[@LEARNWITHNIKHIL1]

Most welcome 👍👍

[@romitchhatraliya5994]

Thank you so much sir

[@spedups4]

A regular hexagonal lamina of side 20 mm rests on a HP on one of its sides such that it is perpendicular to the HP and inclined to VP at 30°. Draw its projections, when the corner nearest to the VP is 15 mm away from it.

[@Code_With_Jay]

The one side of a regular pentagon of 25 mm side is in HP while the opposite side is 35 mm above the HP. Draw the projection of plane and find surface inclination angle with HP

[@pluffy53]

A regular hexagonal lamina of 30 mm side has one side on the VP. If the lamina is inclined at 40o to the VP and perpendicular to the HP, draw its projections.

[@NAINARAJNE]

A regular hexagonal lamina of side 40 mm has a sqare hole pf 25 mm side centrally cut through it . draw its projection when it is resting on one of its side on hp its syrface incline at 60 degree to vp and its corner nearest to is 24mm from vp ? sir can u plz sove this

[@MiniBlockVedios.]

I have on doubt sir why was you take the first 35° why you take the 65° second sir

[@BhavathariniTS]

First we have draw for surface inclination,,here the surface inclination angle is 35 degree

[@Tanishqa629]

6:10 par kya kara Points kaese liye hai karke batana chahiye tha na Kuch samajh nhi aya

[@LEARNWITHNIKHIL1]

ussko oh slant line pe same project karna hai

[@santoshpoudel6018]

You have inscribed a hexagon in a circle of 30mm radius so sides will not measure 30. Other method should be adopted. Nice explanations, however.

[@LEARNWITHNIKHIL1]

The sides are also 30mm it's the same

[@Bunty759]

Nice teaching

[@jayakumarbojaraj2845]

Dear sir Good afternoon do the computer drawing sir

[@sanjeevitachi3334]

Onum Mae theriyala glare adikuthu edhu ne nadathamalae irukalam