[English]Monitoring upto 16 analog Sensors using NodeMCU (ESP8266 12e) | ESP8266 Projects

[@techiesms]

Is it useful or not ?

[@rishabhlavhale3096]

Yes it is very useful. I was in problem how can I connect more sensors to 12E but this video solved my Problem Thankyou :) .

[@krishnawa_]

Really useful thanks bro,😍😍😍😅🙂

[@abhinavkumar1253]

Great job

[@sameermfaroor9856]

Can we connect ACS 712 to this module and monitor my the three parameters like voltage current and power of my home online?

[@techiesms]

You can only monitor the current with this sensor

[@nater3091]

This is the video I've been looking for! Thanks so much for all your help! Cannot tell you how much you have helped me and this is my second day even hearing about the ESP boards!

[@techiesms]

Happy making 😇

[@Zubairkhan-rb1fx]

@@techiesms your 16 sensor code can also work with esp32?

[@ferdinandvollmeyer8356]

Thanks for that, have Phun and stay healthy with many regards from Cologne...

[@technicalfundadharuhera7805]

Wow sir that great. Sir. Sir can we connect 10 or more then Hx711 loadcell ornot pleaee explain

[@kartikgadhvi7208]

Every video on this channel is useful

[@munikrishnan6155]

Sir able to do like 16 nos enerfy meter like emporia Vue and same by recharge like prepaid meter please reply

[@vyomarobotics8873]

it is saying high data rate alert warning ! im getting this error when ever i connect node mcu

[@shuvomandal8428]

Yes same here

[@charlywhite4314]

The PCB looks great!

[@licanueto]

could this be used with old alarm sensors like you would with a Konnected board?

[@midhunmanohar]

Wow! This is awesome! I was searching for a video like this. Thank you @techiesms

[@KartihkCg80]

i have a question , the esp32 have analog inputs right, can we monitoring through the internet? does it possible. plz replay sir

[@ennaiarindhal3141]

Can connect two flow sensor on nodemcuesp8266?? If possible tell how to make it

[@kiranmalganvi6789]

Do we need extra coding for ads multiplexer

[@pr2207A]

Awesome work 👍

[@ReginaSamosir]

Thanks you so much.. by the way, can the interface on Adafruit go public? Thank youuu

[@RAHULSINGH-ez6yx]

Dear sir,can we take digital pin high as sensor value changed ?

[@techiesms]

Yes

[@arslanshahid951]

Can we operate all sensors simultaneously?

[@lalitproductions3035]

Pls make video on water parameters industrial based like PH,TDS, CONDUCTIVITY,BOD,COD , TEMPERATURE

[@ghoond1314]

Kind of simple, but how can i connect a ph sensor that have a formula to calculate acid level inside of water?

[@sayantanmaiti2513]

These MUX works at 5v or 3.3v logics... The analog input of esp 12 can only tolerate 1.1v...so how can voltage greater than 1.1v can run the device safely? Are you using any divider or voltage step down, between the output of the MUX and the analog input of nodemcu?? Plz explain sir.. Thanks

[@mcomulu]

Maybe you can make a video, how to measure the level of a Lithium ion battery

[@pranendra_]

what i do, if i want to use sensors acs712 and zmpt100b in one analog pin?

[@MN-be7sx]

please explain 1-how to have graphical trend from sensors out puts. 2- how I can save like 2 month sensors values and see these values when when I want.

[@mekanikmucize8196]

so how can I monitor it in my android system when its offline from internet, I mean how can I monitor it in only local, thank you for your video and help..

[@pr2207A]

When will your LCSC interview video come?

[@pr2207A]

Yup. I am so excited...

[@mohdabduljameel1184]

PLS SHARE THE GERBER FILE..........I.E WHICH U DESIGNED IN EASY-EDA

[@pratikmundagod5491]

Can you please make a video on how to get data from esp8266 as feedback on app after writing to esp8266

[@neoErnz]

do you have the link for these project? hope it does, it would help a lot. thanks

[@vaghjayesh3971]

Great idea bro 🤩👍 Can i do it with esp8266 esp-12F by same method?

[@shubhamprasad6910]

will this work for sensors that require 5V supply? is there any constrain regarding power for sensors? your video is very helpful . Thanks

[@techiesms]

5 v sensor will work but the reading may fluctuate as esp works with 3.3v logic and sensor work with 5v logic

[@gemax2]

Hey there. Do you think I can used this with my old alarm system and hook my reed switches to the board and monitor my own house? Thank you

[@techiesms]

Yess

[@gemax2]

techiesms there is any way you can share the gerber file? To my gemax2 at gmail?

[@gemax2]

Are you familiar with Home Assistant? If is yes, can you show a code for this project and have it work on HA? Thank you

[@1046sacm]

Perfect, thanks. I will contact you for some PCB's.

[@sajidmurtuza1420]

Hello by any chance do u have any pcb available or do u have its layout ?? Plz reply

[@techiesms]

You can get the PCBs free with our merchandise order

[@techiesms]

techiesms.com/merchandise

[@gemax2]

easyeda.com/techiesms/16-channel-analog-multiplexer-using-nodemcu

[@salvatoreplatia6585]

Ciao scusami se disturbo. Complimenti per le tue capacità , è possibile adattare questo progetto a funzionare con blynk ? Grazie

[@lucasferreira2695]

302/5000 Hi, I'm trying to perform an energy monitor project using the same base programming but I'm finding it difficult to transmit the data to adafruit io could help? The library I am using is #include with the current sensor sct-013 and voltage sensor zmpt101b can help me?

[@fullthrottle392]

Bruv. Can u make seperate video for building PCB

[@sullurukiran4865]

wow!! nice project can u tell me how to interface ultasonic sensors for this please. i need 3-4 ultrasonic sensor to be connected AND can i buy any multiplexers in amazon there r many multiplexer??

[@mehulvarshney6708]

Can you give the Gerber file for this PCB? Really need it!

[@techiesms]

You can get the one PCB for this project absolutely free with my merchandise order. www.techiesms.com/merchandise

[@calculatescore]

Sir where have you connected A0 pin to ads1115

[@hugohamel1259]

Do you have gerber file?

[@ishanverma8090]

can u help me with programming this MUX in micropython

[@farismaulanadaulay1050]

sir can i have the easyda file. im kind confuse to use the app

[@ninja1a]

are u still selling the cct board ?, or is there a link for easyeda :)

[@techiesms]

Nowadays I’m giving the pcb free with every techiesms merchandise order techiesms.com/merchandise

[@mallikavijit3967]

Brother, how can I use arduino to read data, then to tx this data to a node mcu and then the nodemcu will upload this data to a server. Please help me.

[@vishnubheemathati7058]

Is it possible..? To messure all sensors at a time 🤔....

[@techiesms]

It’s measuring at same time only

[@vishnubheemathati7058]

@@techiesms I want to use piv, ultrasonic, humidity, LDR sensor, will it work

[@techiesms]

Yesss

[@vishnubheemathati7058]

@@techiesms bro please help me bro... Where I get the source code for that 😊

[@10xGarden]

Does jlc pcb ships to India

[@techiesms]

Yes

[@krishnawa_]

Can I use Cayenne platform?

[@chingkheinganbaleishangthem]

Yes

[@shinchan3157]

Bro I want to connect humidity, water level , water flow, soil moisture and pir sensor . What board can I use for that and I should see the value in system or app. Please help me to finish my project

[@techiesms]

The same circuit which I used in this video will help you for your project t

[@shinchan3157]

Bro but how can I make all the sensor to work at the same time

[@techiesms]

All the sensor will work at the same time only Watch this example kzbin.info/www/bejne/b5Xbdpd6eceSnac

[@shinchan3157]

Bro can u send me the gerber file so that I can print the circuit board and the program code for referrence

[@pradipvairal4183]

Great job....

[@kvancersoy8423]

Hello , can you give the circuit file pls ? 8 is enough for me but 16 will work np @techiesms

[@Sourabh_Jha1994]

how to use for raspberry pi

[@naturewonderlust6515]

Please provide code for all 16 sensors.

[@saadsoomro9282]

Can we save these sensor values in ada fruit io???

[@techiesms]

Sensors value are automatically saved on the server for 30 days

[@kashafwania5406]

How to check sensor data values in adafruit server?

[@evileye1711]

Hello, big fan of your videos, Using one of your projects with nodeMCU I have made a theft alarm integrated tasker with blynk and tinycam pro for monitoring any movement outside my gate,i had a spare android lying around. :) How can I participate this PCB Giveaway? Also, can you guide me for using a PIR sensor in parallel to the existing code? I would be more than happy to share my projects, Also check tasker it is a wonderful application which integrates with phone sensors!!

[@mehulvarshney6708]

Hi, I just connected as directed in your video. I am using Soil Moisture Sensors but I am getting false values. The values are very low then it is when directly connected to the Analog pin.

[@zulkifliarshad]

Hi i having the same problem and i just found out that my BlynkEdgent.run() are causing it. Have you solve this issue?

[@rahulmoorkoth2395]

Is there any other way to do without using any digital pins

[@techiesms]

No

[@shaharyarahmed8575]

can you provide circuit diagram of this project?

[@techiesms]

It’s provided in the video itself

[@shaharyarahmed8575]

@@techiesms yes. thanks ✌

[@shaharyarahmed8575]

It works fine but i am facing an issue that data sent by nodemcu to the adafruit is displayed for very small time... like 10 secs and then.. it halts with the previous value.. 😐

[@shaharyarahmed8575]

it then updates (adafruit dashboard) if i reupload code and then change values of potentiometers? what could be a problem?

[@techiesms]

Internet connectivity or may be their is a loop hole in the code

[@jignishapatel5711]

Made same video with blink please

[@kumareshj7741]

WHAT IF I NEED TO USE ULTRASONIC SENSOR.. U PPL DINT REPLY FOR MY MAIL

[@ahmednazir1671]

how to change wifi network of wemos d1 mini wirelessly

[@PacLevkov]

use WiFi manager

[@parthajana3365]

Sir, how to use multiple digital pin and pwm pin with nodemcu

[@user-xj7db6ww5e]

super cool

[@gaurangdalvadi8106]

I am techiesms

[@MS-hb3ol]

Why do you talk like that