I have a Boss LMB-3 a Behringer BEQ700 and a Boss MT-2 on my drummaschine for ages. I tried this, because its a cheap way to improve your sounds. But I found out not everyone was aware of that solution. And I'm doing this for over 10 years now
@Senchai994 жыл бұрын
Bro somehow your voice slipped into the video at 7:10 when you turn on the drum machine, sounds so trippy haha
@sixthfloormemories15664 жыл бұрын
"Hello? Is anybody there?" Now that you should sample and use in a track!
@tazcerogers29474 жыл бұрын
Great veiner scent. Thanks
@Kahann04 жыл бұрын
Just got my RD-8, the single voice outputs with pedals make it SO versatile
@paytonclyde48202 жыл бұрын
InstaBlaster.
@syntheffects2 жыл бұрын
Interesting video! The DS-1 is optimized for midrange guitar tones and you lose most of the bass, also you get a strong hiss. Using it as a send effect to run it parallel to the original signal is a bettter option. Also there are overdrives/distortions that are better suited for drum machines like the Hustle Drive by Mooer which doesn't kill the low frequencies.
@NoizeLondon2 жыл бұрын
Interesting will Check those out thanks !
@spacealienjesus7093 жыл бұрын
Love videos like this. Thank you ever so much..
@daren.t.housse21214 жыл бұрын
Good video Fabio 👍👍 just got to love pedals and so so many off them out there 😎👍 o and by the way good catch on the gear ,good job too 😂😂😂😂😂
@mertzeytinci74963 жыл бұрын
Hey there, great video! Did you connect them to a speaker via aux in the end or sth else?
@albertohilsaca97574 жыл бұрын
Love my strymon pedal board!
@docgnft66814 жыл бұрын
Fabio... thanks for vid. Any troubles running the low Z line from the drum Machine into a high z input of pedal. I am just starting to setup a bunch of my pedals and ran across a few other vids that claim that a re-amp box (like a radial re-amp) may make it sound better. Just thought I’d get your thoughts! Thanks for the content brother! T
@syntheffects2 жыл бұрын
It's not a problem at least for most of the pedals. There's science to back it up, but it's easier to just try pedals or listen to demos of them to find out. I never reamp any of the pedals I demo.
@warius12 жыл бұрын
Wow he uses guitar pedals with a drum machine, mind = blown
@originalfallinggirlАй бұрын
I always disposed the much loved DS-1. My grandma bought me this as my first pedal in like ‘88. But I just find it so trebly and harsh.
@ericrogerson2052 Жыл бұрын
Also I like to have the midi out of the volca beats going into the midi in of my flashback x4 so I’m able to program wacky drums
@pirateradioFPV8 ай бұрын
Yeah, the kids don't know how the 90s techno sound was done. This is how. And it was done live. Just pick a drum machine with single outs or at least as many outs as you can afford and then go crazy. All you need are those cheapo pedals from the Behringer and a mixer to get started. Analog mixers are going for peanuts now that all the productions rely on the digital desks. So, good times for old and new farts to get farting around.
@JaideBull15 күн бұрын
Yooo thank you this is very informative!! I’m completely new to this so where does the sound run out from? The drum machines ?
@erikvanzanen2 жыл бұрын
'reverb is best when used subtle' hardstyle has entered the chat
@Subtronik Жыл бұрын
Do you prefer delay before reverb? I’ve heard it both ways and am still on the fence 🤷🏻♀️
@AW-Services Жыл бұрын
Forget DAW's and PC based production. Go traditional and analogue. You can't beat the Boss DS-1 for sound shaping 90s inspired kick drums on the Roland Tr6s
@EchterBonito Жыл бұрын
Is it possible so split a pedal to 8 voices on my drummaschine? (Vermona DRM1)
@vishnudh12164 жыл бұрын
I couldn't find any video in your channel that explains about taking audio from the DAW into the pedal
@syntheffects2 жыл бұрын
What Daw do you use? In Ableton there's a special "External audio effect" for that, you pick the output and input channels of your audio interface that you connect tge pedal to and then it works.
@vishnudh12162 жыл бұрын
@@syntheffects So there won't be a need for those Radial boxes to change the signal level? Just manually adjust in the external audio effect
@smokey902 жыл бұрын
dod meatbox is one of my favorites.
@qualityserbi3 жыл бұрын
Is it normal that the volume on my korg volca bass is reduced by half when I turn on my caverns delay/reverb pedal? It feels broken to me.
@syntheffects2 жыл бұрын
If you have a Y cable you might try connecting your volca to a pedal with that, sometimes there's problems with phase cancellation when running a stereo signal into a mono input. Also check that the cable from the pedal to your interface isn't tge cause, try running sth else through the pedal.
@moonboy20223 жыл бұрын
Hey dude what cable you use to connect the pedal to the drum machine?
@ellisbenm2 жыл бұрын
Probably an 1/8 in. to 1/4 in. TS Cable.
@tomvice3 жыл бұрын
You need a reamper from the drum machine to the pedal. And a DI from the pedal to the preamp. Otherwise impedance mismatch will kill lots of the frequencys making it sound thin
@fishbonegaga4 жыл бұрын
Damn , i had like 10 of theses pedals effects back in the days i was playing guitar . I sold everything... my bad . 🤣
@alphanumeric15293 жыл бұрын
Yeah, regret every pedal that I've sold. Was just on ebay looking at the price of pedals that I've sold... most have doubled in price, and I can't reasonably get them back... my various boss dd's... argh!
@icedrum5554 жыл бұрын
Haha nice =D
@JackAcid3 жыл бұрын
What's the name of that reverb pedal, bro?
@NoizeLondon3 жыл бұрын
Digitech Polara ;)
@JackAcid3 жыл бұрын
@@NoizeLondon lovely stuff! Thanks!
@mit136speichenumdiewelt4 жыл бұрын
I like your channel, it is fresh, funny but the idea of patron do you really think that is a good idea?
@TheGreatPanicker2 жыл бұрын
Wish you would have explained how you connected the devices.
@NoizeLondon2 жыл бұрын
with cables :)
@gooneybird8084 жыл бұрын
I like to put fx on my send and return on my mixer so I can still get that clean sound for the source. Especially for delay and reverb...you know that though haha
@Flux7993 жыл бұрын
Me too but typically distortion doesn’t go in a fx loop. It’s best to run your device right into a distortion pedal and then into a channel on the mixer.
@syntheffects2 жыл бұрын
Yes! The DS-1 is best used in parallel like that, so you don't lose all the bass.
@lloydmckay32414 жыл бұрын
You can get Free Vsts for all and more of these efx.
@josh-zmidi-banana9263 жыл бұрын
Lol I'm subbing because you recognize GABBER music.
@khwaishtongia16874 жыл бұрын
What happend to taking a break???
@richfieldkirthan4 жыл бұрын
That means you didn't watch that video till end😂
@kenadhitya3 жыл бұрын
So panning will impossible when plugged to pedals? Thanks
@purelucknoskill51582 жыл бұрын
??
@syntheffects2 жыл бұрын
It's mono so panning gets summed or ignored in the DS-1 bc it's mono, but will work with the other stereo pedals (2 inputs and outputs).
@kenpitman Жыл бұрын
Came for the Drum Machines but was disappointed as it was about other sound pedals 🙁