The important rating for an amplifier is RMS power. RMS tells you the sustainable power. The important rating for a speaker is Maximum power. The maximum power tells you the power level above which the speaker will be damaged.
@gboates4 ай бұрын
what you wrote means nothing
@socialite12835 ай бұрын
Um... if you have a 400w speaker, an additional 50% power would be 600w, not 800w. 800w would be an additional 100% power.
@ronniksentertainment2 жыл бұрын
I am a sound operator but what you have taught me today is the knowledge that I need now especially as we are planning to upgrade on our system. You are the best teacher. Thank you.
@kendrickschwartz12868 күн бұрын
Thank you I understand now
@jagpeek6 ай бұрын
Great, short and sweet. I've been trying to find out the exact information, but had no luck until now. Thank you and wish you the best!!
@diddy1031775 ай бұрын
A bit of mix up with your “50% above” rule for amplifier to speaker wattage. 50% above 400W is 600W and not 800W.
@soctechtv2 ай бұрын
Watching here very informative vedio thank you for sharing 7:16
@jeremiahuke3037 Жыл бұрын
Thank you so much, sir. This information is gonna tremendously aid me regarding my desire to become a Great audio engineer/record producer
@dixonlitesproduction81744 жыл бұрын
Well put and profound
@pudygroupltd4 жыл бұрын
Thank you
@pudygroupltd4 жыл бұрын
Thank you
@myrapemba70042 ай бұрын
Nice tutorial learnt a lot from that
@serhii-ratz4 жыл бұрын
Sorry dude but +50% is not 100%. 100+50% is 150 Also you can go above in terms of resistance, but you will loose power.
@MistaToo Жыл бұрын
Informative piece
@them16band92 жыл бұрын
Nice tutorials
@cyprianoginga79423 жыл бұрын
This is very educative
@chasecampan-thornburg17216 ай бұрын
Thanks for the excellent video! I’ve been reading up for about a week, and this is the clearest explanation. How does one know how many speakers one can connect to a power amplifier?
@user-jf3gy1ve2g2 ай бұрын
Was a good lesson
@mbarushimanapaul7980 Жыл бұрын
good lesson
@zviitosumaili76262 жыл бұрын
Thank you so much for the teachings
@user-pc6tn9bg2r9 ай бұрын
Thank you very much sir, I've learned a lot
@jsnmad2 ай бұрын
3:21 Interesting ... Learning here ... So, what if the amplifier is matched exactly to the speaker power? what would happen in such a case?
@samppazzz4 ай бұрын
I have mono amp, 8Ω=4.5W/4Ω=9w/2Ω=18w/1Ω=36w/0.5Ω/72w My speakers are Proson Event 10 pro wired parallel with load for amp is 2Ω nominal, and because my amp is capable provide power for very low resistance sound volume for listening level is good and plus some more if needed. So with all that i want to tell you that it is not always needed big wattages. My advice for everyone is that chose amplifier where is youre speakers nominal impedance supported half wit it and nominal rms wattage double
@gboates4 ай бұрын
Years ago loudspeakers were tested with continuous power. The winner was the AR- LST at 12 wares continuous. Any more and your voicecoil lights up like a light bulb filament.
@jecelabayata-he1vn27 күн бұрын
Sir for a two way speaker having max power of 500 watts What is the amplifier wattage I will used? Thank you.
@allofmel4 жыл бұрын
Haiya congratulations...When did you start a channel?..You became a teacher..wooow that is so great..😃😃..Subscribed pap!
@pudygroupltd4 жыл бұрын
Thanks Mel. Am just passing on some knowledge. Still in Sound.
@princepeacesunday81625 ай бұрын
Peak N RMS are the same, peak power is short period of program power to the speaker Continues or program power is the continuous power delivered to the speaker. You didn't mention spl?
@berndtlindstrom8305 ай бұрын
Not a word about speaker sensitivity in db
@princepeacesunday81625 ай бұрын
I was expecting that too
@victimovtalent60365 ай бұрын
which one better a single 18"500w speaker or multiple smalest speakers in the same power rating 500w?
@samppazzz4 ай бұрын
for short answer i say multiple, but it cant deside based on that information only.
@adrielokoro8907 Жыл бұрын
Wonderful
@telomore47254 жыл бұрын
Please elaborate more on the issue of ohms. Eg, the amp ohms is 8: does that mean I should buy 8ohms Speaker or could I also pair 4ohms?
@HaharuRecords2 жыл бұрын
why 4000 watts amp would blow 300 watts speaker? its giving a big headroom.. I can't understand teacher, you better explain more😫
@selektasparks25492 жыл бұрын
Hello
@d.jemmychikezie82672 жыл бұрын
Hello boss how can I reach you on WhatsApp or anywhere for learning more about sound
@billmea55933 ай бұрын
You really need to go back to math class 50% plus 400 is going to be 600, 50% plus 600 is going to be 900 you think you know what you’re doing now you’re telling people to get amp that are gonna be way too big for their speakers
@johnsshed9953 ай бұрын
Your maths is very questionable My friend .Do you not understand percentages ?
@d.jemmychikezie82672 жыл бұрын
Hello boss how can I reach you on WhatsApp or anywhere for learning more about sound