EP 27 - OBDLink SX Test (And Manual Transmission Tips)

[@labradormcgraw]

Very informative, thank you. All the best from London.

[@Marc_Wolfe]

This early video reminds me of some of my early videos.

[@phodge14]

Just picked one, needed a way to set the timing on my truck. (96 gmc k2500, head gasket job P1345 code) it's pretty crazy tech definitely recommend picking one up. Considering getting the scan xl pro software. Timing was -12 btw lol

[@Marc_Wolfe]

Looks like OBDLink has made some improvements to refresh rate since then. Too bad the data logger costs extra.

[@markbutterfield5559]

The engine load is the torque output of the engine. An internal combustion engine is - approximately - a constant torque motor, meaning it can produce the same maximum torque at any rpm. The fact that it happens at a rpm or another, dictates how much power it produces.

[@romuloeduardo1547]

Hey, nice video. Do you think that the responde delay for the real time data is OBDLINK SX related or is it a limitation on the ecu of your truck? I've seen information that the OBDLink SX is one of the fastest obdii interfaces.

[@chewbacag914]

Can obdwiz be used to check the hybrid battery health? If not do you know of an app that connects to the obd connector to check the hybrid battery health?

[@dalegribble8140]

In my eyes ! This also can be used for a dyno testing

[@jvon5439]

will it show a load if the engine is in on but not running??????

[@adanlopez3931]

Are you able to adjust or program temperatures on electric fans with this tool? I own a 2005 GMC Sierra. Thanks

[@DielectricVideos]

Adan Lopez The default software only allows reading diagnostics and clearing codes, but with the correct software package it should be possible to tune parameters like the radiator fan temperature.

[@adanlopez3931]

Dielectric Videos, Is the Scanmaster OBD Software able to program the e-fans? What do you recommend? I have OBDLink SX. Thanks

[@diduck6878]

You can now, with tunnerpro

[@BeitilNabawiya]

Hi,can I reset service engine light with Odblink?

[@DielectricVideos]

Azurfa Da Zinnaria Yes, for most cases this can reset check engine lights, except for certain "permanent" codes which will only go away after the problem is fixed and the sensors can sample adequate data to turn it off.

[@BeitilNabawiya]

Dielectric Videos , thank you I watched your video 3 times to see how or where to reset the service light. I changed oil on my 2008 Audi A6 last month,but I don't know how to erase the service light on my dashboard.

[@apollomedia7210]

Does it have live data?

[@chandrashekardoijode3266]

Good job sir

[@yoyoyoyoyoyyofsdfsdf]

Either your coolant temperature sensor is bad or you are REALLY overheating. If your coolant is at 240, you are doing some serious damage to your engine.

[@DielectricVideos]

I believe that sensor actually reads head temperature, not coolant temperature. It's mislabeled in the program.

[@spikeshostagetv5935]

Why is it illegal? I'm a technician, should know what is going deeply into it

[@4dirt2racer0]

bearings r the least of ur worries if ur lugging the engine enough to ping