Ep.30 | Revamping the engine - Equipment Fails and Upgrades

[@CJSAQUARIUMS]

Follow me on IG : instagram.com/cjsaquariums?igshid=MW51NW1lOGxoZjUwdw%3D%3D&

[@NerdistAquarist]

Yo CJ, just wanna say it's a pleasure watching your videos brother. When you took that break while back, I didn't know if we'd hear from you again. Keep on rocking 🍻

[@WealthyFirefighter]

Man, I use to follow you back in the day and I stopped following the hobby on KZbin shortly after you left… Today I discovered you’re back now I have to go catch up, glad I have some stuff to catch up on

[@EnergyInclineReefing]

Quality on Quality on Quality!!! ✨✨✨

[@CJSAQUARIUMS]

🫡 💯

[@elchappo1320]

Damn, u know how to build a reef!!! Ur aquascaping was mentioned in a BRS video years ago! Awesome!

[@CJSAQUARIUMS]

I missed that one ! That’s awesome thanks 💯

[@jacobmills1982]

Beautiful tank!

[@danletter9357]

That is a nice build. Really cool

[@Willyoustandintheend]

Love this tank

[@inventoryking]

My favorite part about the ATK is the float valve. Extra redundancy. Would love to see a full in depth video on kalk. I cant grasp the process of dosing it. With the RODI res, how much, etc.

[@CJSAQUARIUMS]

Noted I’ll have to make one 👌🏾

[@AquaticPolyps]

Another great video...

[@Neforpubl]

I'm watching your video currently so I might comments again, but I just wanted to note that I have been using the Duetto ATO (I have the Duetto 2 now) for 6 years with zero issues. Never flooded or failed on me. I only have the 2 now because I fried my first controller plugging in the wrong power supply. Customer service was fantastic and overnighted me a Duetto 2 and a new pump for a nice discounted price since I was outside my warranty. Maybe worth checking out out a backup.

[@strat1960s]

Tank is loog great!

[@MikeLemming]

Looking good CJ! Hope the kale stirrer works out. I’ve been contemplating getting one too. Also, BRS just put out a video about mixed bed resin, it’s worth a watch. ✌🏼

[@fletcherwright7042]

Looking good 👍 less water changages =algae scrubber 😅

[@acuariomarino5075]

Nice video ,I yes use gravity top off ,less electronics device is better less headache I been used it for years with not a problem

[@siknd1corals]

With the apex ATO you will have the same issue with the sensors being out of water but registering under water. I have been running it for years now and every once in a long while it will catch me off guard. I clean the the low sensor and it works again for some time

[@CJSAQUARIUMS]

So far so good… the default programming wasn’t tight enough. You can see extra lines of code I added and I’ve never had an issue as it relays on both atk sensors and my sumps fluid level sensor to control the water level. It’s basically full proof

[@desmondlarmond9698]

Is that your heater in the return pump section.

[@CJSAQUARIUMS]

Yes Helios heater best system I’ve ever used 10/10 🔥

[@Theaquaplex]

CJ...is it possible for you can share your Wave Pumps (MPS and the GYRE) settings? Redoing my pumps to get better water circulation in a 108G mixed reef, and trying to get some advice on settings like yours.

[@CJSAQUARIUMS]

This has been requested a few times… I’ll get a updated flow video out for you guys 🫡👌🏾

[@Theaquaplex]

Thanks bro...I am looking at your MP 40 video you did 5months ago right now.... That how I have mine, but "that dog don't hunt" as they say in the South for my set-up...lol

[@fameworks5622]

CJ, The atk might be worse than the one you are currently using. Take a look at the new Tunze better sensor and pump.

[@CJSAQUARIUMS]

Works fine I enjoy the 6 layers of redundancy and apex integration 👌🏾

[@SeungSohn]

The magnetic field from the return pump may be interfering with the probes.

[@steevareno2002]

Did the tunze overflow your sump?

[@CJSAQUARIUMS]

It failed on… but was caught by apex fluid level sensor for my sump and was able to have my son unplug it

[@Fish_Ventura]

Dude I love your updates. Please dump that ATO and get a simple LED ATO or another. Relying on conductivity is a gamble. Light won’t be a problem in a dark section of sump. Conductivity just is not working for you, super happier you averted disaster. Keep it up, you tank looks 10x mine so keep my comments in perspective, I don’t know crap, ‘cept these $100 LED ATO work well. Once every 6 months dunk in cleaner or just wipe. Peace

[@bruhman8005]

Tunze fail is pretty bad luck. Generally this wouldn’t be as much of an issue as it has an alarm that sounds if it stays on. However, vacation takes that out of the equation. Glad the tank survived

[@Champsreef303]

Tank update? I swear to god if you broke this tank down! 😂

[@CJSAQUARIUMS]

😱

[@jonathancollins9831]

Brooo, I’m ALWAYS changing DI Resin. Input TDS is 475+.. it’s a challenge 😅

[@bopeep7806]

Sorry CJ, wrote the earlier comment on your stream by accident !! Apologies man

[@queencityreefs]

👌🔥💯✌️

[@Angel_A6969]

My hyder fill was trash!

[@halalpapi8176]

I went through two ATK auto top offs, complete garbage. The lower level sensor never ever works then it always tops off to the high sensor then annoys the shit out of me with the apex sending me alarms. I’m still using it right now, the lower level sensors always fail; however, I do like the controllability with it being a Neptune product. 2/10 for me

[@CJSAQUARIUMS]

You using it standing alone? If so I could see that potentially happening but if you see my programming in the video I changed a lot of the defaults and run times. Mine stops as soon as lower level sensor is half covered. I believe it’s best used with the apex and not standing alone 👌🏾

[@halalpapi8176]

I’ve been using it with the apex, it just doesn’t work how it’s supposed to. It worked well for 6 months, after that I got nothing but headaches because of the lower sensor and I swapped out the entire system, got the same results from both

[@CJSAQUARIUMS]

@@halalpapi8176 yea you just need go add couple lines of code. Review mine… set off of lower sensor is closed instead of waiting high sensor is. Or even better include fluid level sensor like I do with my sump. The default coding leaves the opening for water to fill till it hits the 2.’d sensor.. once you program it the right way you will never have the issue again

[@halalpapi8176]

I just updated the coding with what you just said. I’ll keep you updated on what happens. Still my low level sensor is showing that it’s open when it’s clearly underwater, it’s brand new, just doesn’t make any sense. But I really do appreciate your help brother

[@grimcarnage4309]

Comment

[@jeremy87turbo87]

I really truly think the more you add, the more problems you get. If you can keep it stupid, simple, much better.

[@jeremy87turbo87]

I think it's funny all your KZbin's wanna buy Neptune tunes, Vortex MP 40 and all I ever hear is oh, something stuck something that bad happy. I have had no problems for years. 5 plus with Amazon purchase equipment.

[@CJSAQUARIUMS]

Many ways to do this hobby I’ve had systems with bare minimum before this tank 👌🏾