Ep.9 Amp.The ABC's of the ASR. An Ensoniq ASR10 tutorial.

[@discoprotection]

those drums are hard af

[@tohuxtable]

"editable" is a word bro. don't worry, you got this! haha

[@bandeco75]

T.O. HUXTABLE thanks!!! I wonder sometimes.

[@christianbeauchemin8637]

The digital In/Out on the ASR is pretty confusing: They all have the jacks on the backside, but those are useless without the optional digital board, which is even more rare than the Scsi board and the expander. The way to know if your unit has a digital board is to go in sampling mode and to scroll until DIGITAL appears. If it doesn't, you don't have one.

[@MrJensRoger]

My amp button don’t work how can I fix it ?? Or is it another way to get to amp

[@bandeco75]

Jens Roger fernando pulle I don’t know of any other way to get to amp. There are page shortcuts (that’s what the numbers are for under the page keys) but I’ve never got it down too well and you’ll probably need the amp button eventually. If it’s just that button you can probably get it repaired buy an electronics professional. I had my left scroll button go out on me and it’s fine now. Just gently roll your finger on it while pressing. Also leave the ASR on for a few hours and see if it responds. If you wanna get bold, open it up and spray the contact with canned air and then maybe with a contact cleaner like deoxit. It could be a dirty contact or the switch could be done. Good luck!

[@christianbeauchemin8637]

@@bandeco75 Thanks for the tuts! The way to use the numbered shortcuts is to press the Page button and to quickly follow with a number. You gotta go pretty fast. Example: quickly followed by the number 5 for will bring you to the 6th page (Change Floppy disk) of the System menu followed by 1 will bring you to the second page of the Wavesample menu: Sample Start.