Epic Unreal Jet Performance! FlyFans Flanker SU-27 Twin 64mm EDF Jet

‪@bananahobby‬
‪@rcpilotwill‬
‪@RCPlaneReviewer‬
GET YOURS HERE: $339 www.bananahobby.com/6-ch-flyf...
Specification:
Wingspan 930mm (36.6 in)
Length 1380mm (54.3 in)
Flying Weight Approx 2300g (5 lb)
Drive System Two 2840-KV2300 brushless motors
EDF Diameter Two 64mm (12-blade impeller)
Servo Five 9g metal gear + Two 9g nylon gear
ESC Two 40A w/ 5A BEC (2-6S)
Retract System Servoless metal retracts w/ trailing link suspension struts
Recommended Battery (Not Included) 22.2V 6S 3300mAh~4700mAh ≥40C Li-Po
rc,rc plane,airplanes,airplane,rc airplane,rc planes,aviation,eflite,plane,edf jet,planes,rc airplanes,beginner rc plane,
thercsaylors,best beginner rc plane,aeroplane,flight,rc jet,model airplane,radio control,aircraft,rc saylors,plane crash,
crash,fms,easy to fly,the rc geek,flite test,brian phillips,beginner edf jet,ducted fan,fighter jet,edf,r/c,horizon hobby,
pilot ryan media,remote control,jet,rc crash,pilot,e-flite,fms model,viper,edf jets, rc saylors, brian phillips, the rc geek, edf jets, eflite

[@vicentee2687]

over g over g over g

[@watts4200]

Nice recovery! 💪Fly another day!

[@RCPlaneReviewer]

Thanks! You too!

[@medscott2]

Awesome save Bobby.

[@RCPlaneReviewer]

Appreciate that!! Definatly got lucky lol

[@RaGeRC]

Nice save! I have the other blue digital camo livery. I have flapperons and tailerons programed on mine and this thing will do everything! It'll do a cobra flat spins and high alphas! Such a fun plane! Im super impressed with it. By the way where's your tail cone? It's supposed to have a tail cone on the back and yours missing.

[@RCPlaneReviewer]

I didnt put the tail cone on, its long and on landing with flair it hits the ground so i took it off.

[@ianfryer8666]

Good save bro 🤣

[@RAW00815]

That was a good save 😂

[@RCPlaneReviewer]

You cant tell but i was nervous lol

[@FlankerTanker]

I am confused - you say this was your fault when the stab came away but we could all see the broken foam - what did you do wrong during the assembly ?..I know you do say in the video but i did not understand and I have one of these to assemble, and really do not want to make the same mistake... thanks

[@RCPlaneReviewer]

@@FlankerTanker So the stabilizer has a simple metal rod that slides into a metal collar. Instead of sliding it into the collar i missed the hole and poked it into the foam outside of it. I didnt look to see if it was in the hole and assumed i got it but nope. Poked the foam outside it and the only thing securing it was the glue. Zero issues since.

[@FlankerTanker]

@@RCPlaneReviewer Oh wow - got it and thanks so much for this info - I will ensure I do not do this during the assembly - Keep up the great videos - Cheers from the UK..

[@RCPlaneReviewer]

@@FlankerTanker absolutely!! Cheers and thanks for checking us out!

[@timomalley4282]

Thanks Bobby for this video I'm sold. I will be adding one of these to my fleet.

[@RCPlaneReviewer]

Super flyer seriously

[@snoriverrc3842]

Exciting!

[@RCPlaneReviewer]

Appreciate ya sno!

[@NoonzAirborneRC]

Great video Bobby. Move that lipo 1 inch back she will fly better 👍👊🇺🇲

[@RCPlaneReviewer]

@@NoonzAirborneRC I moved the lipo foward for the 18mph wind that day lol

[@ironmover5800]

You’re my hero ! Dang , that was crazy

[@RCPlaneReviewer]

@@ironmover5800 lol it was different lol

[@sendit_rc]

So 3 flights and the elevator broke off? Im trying to figure out how it was your fault?

[@RCPlaneReviewer]

Easy lol i installed it incorrectly didnt put rod through hole that holds it securly, instead i shoved it putside it and into the foam around it... I had just glue holding it to foam 🤣

[@RCPlaneReviewer]

Elevator broke off on 1st flight

[@warwickEDF_jets]

BEAUTIFUL SAVE !!! 😎😎😎😎😎😎😎 I had a early pre production one of these and had to restrict the nose suspension and lower the rear springs to get the thing to take off 'normal" and add bigger cheater vents with 2 64 inrunner freewing edf units then is was amazing until the airframe gave out

[@RCPlaneReviewer]

Wow!!! 🙃

[@warwickEDF_jets]

@@RCPlaneReviewer oh and forgot to say your landing on the second and 3rd flights just amazing . I really miss this Jet

[@timomalley4282]

i'm really digging what fly fans has been putting out lately. I have their L-39 and I'm in the air for 5 min on a 44mah, and it fly's amazingly well

[@RCPlaneReviewer]

Me too! Totally agree, theyve done some good things and msde quality planes

[@garyrussell7076]

If I send 2 dollars will you buy my lottery ticket

[@RCPlaneReviewer]

Hahahahahhahha i did get lucky

[@RCPlaneReviewer]