Episode 76 Noyafa NF 308 Lan Cable Tester Review

[@smilly9]

Having used one of these I would say it's not bad, ideal if on a budget, gets the job done, more suited towards light use, personally I prefer the Fluke Networks Microscanner2.

[@yuppy9804]

I prefer my DTX 1800 and Versiv 8000. Identification of fault location and the ability to export the result to a PM or Customer is how you get paid for troubleshooting and repair. Kits like this on the job mean nothing when trying to justify cost or assessing cost burden responsibility. On new installs with this product you would have no ability to prove that the cable was correctly installed on a certain date and time.

[@jerkshop]

I had one and it died 2 weeks ago so I'm looking for cheap substitutes. It freezes when I turn it on.

[@nekoroms]

Yyep.. Offcourse a 50 dollar tool doesnt have the same abilities as a 800 dollar fluke 🤔

[@luizsaha]

Does the tone and probe functionality still work on a live network?

[@phalcon23]

Ya.... I'm just a home hobbiest doing small home networks and such... cant afford the fancy toys...

[@EvioneElectronics]

Still trying to figure out why some links flash. Will let you know once I know. :-P

[@frazer26]

did you ever find out?

[@IsmaelMora12]

any update on this? thx

[@Lightzerod]

Hi want to know also

[@markwmscym]

Is there a maximum length of cable the probe will work up to? I need to test a 100m cable.

[@noyafa]

Click here for more information about NF-308>> kzbin.info/www/bejne/rqKanp17l7yMgac

[@randycarter3482]

My question is how well does it tolerate POE? Will it survive and incorrect connection? The Klein Scout Pro3 manual states that it will but will complain. I've seen similar models of this device state they will be damaged.

[@raphaelmahumane1648]

It does not accept POE, or live connection of above 20DC voltage. it has a sticker on the side, notice it on the main transmitter device here on the video.

[@awakenedsoul2638]

Hey mister WILL YOU ANSWER ME? My question is, the short cable that came with it is straight through looking at the sequence of numbers 1 - 8. If you will make a Crossover and Roll Over the 1 - 8 sequence of numbers will not be in sequence it will be 36827 blah blah. I made my own cross and roll over. I have a simple cheap NETWORK CABLE TESTER it all pass because the lights light up so it means if the light lights up the cable is good. All numbers light up. But when I used this more expensive Noyafa NF-388 model is mine, Testing the roll over and crossover cable with this tester it said it failed but all of the numbers are showing. Can this Cable tester read a Croosover and roll over cable right or this only reads straight through cables?

[@andrzejkowalski3122]

Did shows which side (meter or remote) has pins reverse(crossover)?

[@manojkhadka5703]

Can you explan which one best Noyafa NF 308 /309 or Noyafa NF 8209?

[@pathfinder2reality]

Can you please post an update of how this device showed during exploitation. It looks like a very useful instrument.

[@moayad1976]

I used this device for years. version 6.1 of this device is better. the remote terminal beeps once you plug the cable. they removed this function from version 6.8.

[@marky4122]

Good day. What is the use of power port?

[@taufikrendy]

For powering the device if there is no/low battery. DC 9V only (my test)

[@CorneBreed]

CAN IT DO THROUGHPUT TESTS?

[@TheMadMagician87]

Fuck no, to do that properly even just at a verification level (not certification) you will be paying at least 10-15x the price, of things such as this.

[@Maryan865]

Good evening. Do you have any idea if this tester is good for measuring the signal coming into the TV? or daily of cables? VALUE LAN Cable Multifunction Tester. www.secomp-international.com/en_US/value-lan-cable-multifunction-tester/i/13.99.3002-1

[@WaschyNumber1]

This review is like a unboxing and many times reapiting how to check the Cable's, I was hopping for more details. This video could be done in unter 5 minutes. 👎