Episode Eleven - Braiding Pt. 3: The Fishtail Braid

[@GrimmGreen]

I noticed you didn't bother to "vapor condition" the vice , Rookie move

[@wykydgt]

Imagine the flavor if those coils had been conditioned. I'm appalled at his exclusion of the conditioning process...

[@MrDusRam]

I know right, and they both didn't vapor condition their beards. I mean, come on. Leave it to the pros

[@Letgomygeko]

GrimmGreen unprofessional and a rookie mistake on your part

[@CannibalShadow]

Thanks to the both of you for posting this.

[@hibbityhoobla6624]

finally found a way to do a core braid thanks do much with the amazing step by step walk thru and amazing coil work

[@steamyvapez2594]

I live this tutorial! I saw your post on instagram and just knew I had to try it! I can't wait to give it a shot! thank you!

[@shadowolf922]

I love how proud the long haired dude looks in the end. Haha

[@dandemann1344]

You're doing gods work Ryan!! Keep it up bro!!

[@TheCharleseye]

As a paracord hobbyist, this is right in my wheelhouse. Nice job.

[@mangledmeditation3042]

Once again another very instructive and beautiful tutorial. Thanks roger and my doode ✌

[@crvaulnerii]

Doode thanks for another video been awhile good to see you.

[@dataluskazan4006]

wow something I thought would be really hard and you guys made it look easey now I have to try it Thank You both

[@elliottnunez1057]

Im a licensed hairstylist for 20 something years and my braids dont look as Sweet ! LoL It's cool after watching that I now have another build for my Noisey Cricket..I can take that damn parallel build out now..Ooo Wee Thanks Doodes !!

[@IntelligentlyStupid]

you should really learn to do a staple coil 0.5 × 5-8 pieces of ribbon wire stacked vertically clapton with 36-40 gauge nichrome wire you'll love that one or a fused Clapton 26x2 nichrome core wires, Clapton with 36 gauge nichrome wire. Those two builds produce the best flavor and clouds out of any coil that I've tried so far but if your looking for just a straight solid flavor build then a staple staggered fused Clapton is the way to go. I've never had a coil that produced so much flavor in my life lol but you will sacrifice clouds that's a guarantee. Also if your not good at building you can order them off ebay for Like $10-15 and theirs all the exotic coils out there. that's where I used to get mine from before I learned how to build my own lol

[@joserosales5153]

Great build!! It requires lots of patience!! But it's worth !! I gotta practice a lot!! Thanks man!! ☺️🤘🏼😤💨💨💨💨

[@Loki.uk70]

inspirational!! this video has led me to doing allsorts of braids and my wire Bill has gone through the roof!! LOL.... Smoking 's Dead Keep Vaping!

[@mrburgundy9252]

I'm gonna try the 3 loop one now. Thanks for sharing!

[@eandrews53]

I need to learn me to make some fancy fog-flinging coils like this here. I like the storebought braids.....but with this AWESOME tip, I'll be cranking out some QUALITY braided wire coils. YES SIR ! ! I'm afixin to study me a mess of wire braiding so I can twist up some of these killer coils. THANKS ! ! !

[@Jizzoe78.]

That was a beautiful 3 wire braid with 32 gage! I will try that one first brotha!

[@ceawlinofwessex6607]

nice to see another video upload Doode... cant wait for the RDA

[@ronnyc8251]

great vid guys, very detailed and well done. I have yet to try a braided build. Thx Doode

[@petescott3756]

Great tutorial. Having this video for demonstration was a great help. My first braided coils and they came out perfectly. Braided coils are a lot easier to accomplish than clapton in my opinion. Again..thanks

[@darknes18]

I just made a 3 wire braid with 26g ss316l wire came out at 0.15 ohm on a 3mm jig single coil. works nice!

[@EderAcevedoPhoto]

Nice and kind of easy builds, thanks for putting this tutorial available..!!

[@alexandersangster7137]

That was an epic video man, I've always wanted to do a braided build i might try it now, thanks dood

[@Idunno19023]

thanks for the vid, I gave both a try first one definitely easier the core wires kept getting caught up for me on the second but then it was my first try at a braid

[@angelotorri6908]

i love your channel for the simply tutorial and explanation many thanxs

[@addytuney2028]

thanks Roger! thanks Ryan!

[@willboyles]

sick dog the bounty hunters brother Tim Chapman is a coil builder

[@wazoo2]

Very cool, thanks for the tutorial. I need to try this

[@bigboysvapes594]

Awesome build guys!!

[@grahamvm771]

Big Boys Vapes

[@bigboysvapes594]

grahamvm77 sup

[@Mrinspiredby]

beautiful!!!!

[@Nicoleisunderwater]

alotwire's face when doode hits the cricket the first time :D

[@gr33nkush]

This is a great build. I’m excited to actually try this one out

[@ForkMyDongle]

Awesome video as always. Definitely going to have to give this one a go, was never really good at the coils that involve a drill and wrapping super thin wire around somthing...which seems to be most coils lol.

[@WarrenKBell-or7ph]

HOLY SHIT, I MAKE BRACELETS AND JUNK LIKE THAT WITH HEMP BY LOOP BRAIDING..... NEVER EVEN PUT THAT IN PERSPECTIVE WITH COILS...... HELL YEA !!! THANKS FELLAS

[@JBetoRodrigues]

Whaoooo....Amazing Really !!!!

[@Cooper-plays]

another cool video. cheers

[@letseeker1594]

can you do a tutorial over the hybrid coil?

[@DarkSaguaro]

Thanks for the tutorial! btw you look like a master and his padawan XD

[@Kdogg613]

badass! Thanks my mind is blown watching your channel \m/

[@damien9061]

I gotta try this out 👍🏽

[@beehambonio3378]

Just, wow . I need to try this out

[@bulldogtonyyt1116]

I'll be trying this build ASAP

[@klaytonvonkluge4905]

great build for those who don't have or can't utilise a drill.. some abodes can't abide a noisy & cumbersome drill, and for those of you out there, you're in business ...

[@dantheman1621]

awesome bro. thanks

[@cravejdm]

I'm going to do this build today lol.

[@mmmattbeats1]

Love my twisted messes on noise cricket II

[@yetisuncle666]

hell yeah

[@SunriseReaper3]

Is that unbox therapy music I hear at the start of the second braid?

[@ryangrindmaster8225]

Please do one that incorporates tsuka technique!

[@shmack916]

with or without the scooter stick

[@Oguni_San]

wow nice vid i have to build it :) thank you

[@Cmoney198]

almost like the vertebraid.

[@richardpeterson3753]

I find this to be an easier option than the Clapton family, those are pretty technical, and my drill is in it's last leg. and I don't have a stockpile of wire in various guages. so all in all this helps me get a nice coil in my rda without a lot of complications.

[@konkelkent]

That guy to the lefts face blends in with the table, i think u need a black table lol:D great coil tho

[@canna_craigy_uk172]

konkelkent you mean squid doode? 😂

[@nabilmakarim7200]

Craig Buckton vu

[@nabilmakarim7200]

Craig Buckton v

[@1GNor4C3]

thanks!

[@ianstephens8533]

I'm doing this build as I type this. BUT I need an up close view of how the wire is in the vice. It'd help a lot

[@seanrobinsonjr4363]

Those this really give you better flavor and throat hit that a fused clapton or is this just more on the fun side? I don't that the more advanced the coil is, the better. Think it's just placebo and it's just fun to make if that makes any sense.

[@yoyo-pu8dj]

What's the name of the clamp you use.. looking to pick one up

[@OvisAriesFarm]

It's nice to know there's one area of coilbuilding where girls have a natural advantage lol #braidingsincebirth

[@jonathanthomas2171]

Kelly Bell i hope you do better than i did...mine looky funky as hell...lol

[@OvisAriesFarm]

Jonathan Thomas well, years of practice in braiding really do help. But don't worry - I'm sure the ridiculousness of all my other builds more than offsets any decent braids I make!! :D

[@shs646]

Would have been a hell of a lot easier if you guys used a pov camera angle so a guy could follow along easier

[@ROMEO-jr5dv]

Dope

[@slmawi]

18:35 were i can buy Coiling jig

[@Jason-Scott]

AWESOME

[@DERK6116]

will you be selling these coils? i would love to buy some. i just don't have the time to build them.

[@thedanishvapingviking8473]

What is the explanation that one build compared to another build can create more throat hit than others?

[@vsm351]

19:10 "Ahhhhh. I see, fucker." lol kidding great video man

[@eioudiaosiyo4883]

what mod are you guys using

[@daveeisler3605]

when's the RDA Coming out??????

[@dantheman1621]

the 30th so about 15 hours

[@anthonygarcia6173]

How would the no core fish tail do with 26 g kanthal a-1? 4-5 wraps?

[@samharvey-wade6119]

Anthony Garcia it would be fucking huge 😂

[@tyanpoo2696]

I just did just this today actually lol the 30ga a1 I was using kept breaking. so I used the next size up I had which was 26ga A1. I did the 3 loop fishtail no core-6 wraps at 2.5mm id. fit on my aria terminus. .2ohms. drive.google.com/drive/folders/1xSmH4P_9aHkuHBw0GHiPq-rijtZZuAC-?usp=sharing

[@romolosanchez8500]

from my understanding a .10 ohm build is very dangerous on a "single" mechanical mod (Ohms Law) so was wondering whats up with that. Ran a .13 build on a duel mod with two 30 amp fuse along side a duel mosfet and fried it like KFC.. I've always calculated my builds by voltage ÷ build to get cranking amps for safety, just curious about results...????

[@romolosanchez8500]

I understand the purpose of misfits working towards the switch, but a .10 vs a fresh 18650 equals more amps then the cell can handle rms... Have i been mislead in my calculations for a safe all day vape...???

[@kovalsky666]

Amp ratings on cells are based on continuous discharge. When you vape, you pulse the battery, so you can go above the limit as long as you're not chain vaping till the cell is dead. It's more on a risky side and you need to know your batteries, so it's always better to be within the limit.

[@IntelligentlyStupid]

your correct but a lot of vapors go by the pulse rating, which is usually rated anywhere from 3-5 seconds so you can vape at higher amps then the continuous amp rating but you don't wanna go any lower then .10 or be taking longer pulls then 2-4 seconds that's why most people that vape .10 usually only do 1-3 second pulls but you also have to have a really good cell, that's why battery safety is so important, so you know what your battery is capable of. Cause you wouldn't wanna do that with a single 18650 that has a battery with a 10-15 amp rating cause even then the pulse would only be like 20-25 amps. You usually wanna use a 25+ amp high drain or higher cell that can put out around 38-40 amps pulse but i would recommend to never take longer pulls then 3 seconds on a .10 and don't chain vape it either and some people will argue never vape below a .18 or a .20 on a single 18650 but if you do just have a thorough knowledge of battery safety and a thorough knowledge of how long the pulse was when they rated the amps on your battery but most are usually (not always) between 3-5 seconds. Where it gets really dangerous is when people have .06-.10 and they're hitting them for 5-7 seconds chain vaping. That's when batteries tend to vent and explode. there's really no reason to ever go below .10 on a single 18650 cell no battery even with pulse rating can handle that safely. I mean a fresh 4.2 volt battery with a .10 build is 42 amps so that tells you something right there about how unsafe it is.

[@YourAvgjoe]

what tube mod was that, the soi shorty?

[@Guns-N-Baggers]

Can you use 26g as the core and does the core wire goes next to the braiding wire or what

[@derekwaggoner7501]

I think you could probably use that gauge. would help raise the resistance which would be a good thing.

[@EspenFrafalne]

Why are not everyone using twisted wires for their braids and other builds - or perhaps even "hive wires"??? Im using a twisted 36guage wire for a fishtail braid - and it works really good in my Kayfun Mini V3 (which is very limited when it comes to bigger builds)... Ive only made this once - and tried it since yesterday. Seems to produce very little "spit-back"! Using twisted wires, makes for a more springy coil, but i built and installed this without torching it, and it works great... It was a LITTLE tricky... When the coil is wrapped tightly around the drillbit, the "springyness" will want to both widen the diameter of the coil - as well as making it into a "spacd coil" ... BUT - if you restrict the "horisontal expansion" of the coil (by placing your fingernails or something on each side of the coil, keeping it from expanding into a spaced coil), it helps a lot. I did still have to adjust it some more while dry-burning the coil, but at least it worked on my first and only try... This is the only "advanced build" ive tried, other than using a regular 30guage fishtail braid... Looking forward to trying it with a hive wire, to use with my Alpine RDTA.

[@TerraBuzz]

I came here and I messed up my brain trying to understand the loops... Lol...

[@igotcake5434]

mine was so bad it didnt even spring back up

[@richardpeterson3753]

that said I realise claptons probably out perform braids, but I got limitations. and can't afford to accedently waste wire in experimenting. it's a close second, and that's enough for me

[@kennethtomer5553]

@artofvaping where can I get that coil jig...same as m.terks

[@jonathanthomas2171]

Kenneth Tomer i have the same one, it is a cw, relatively cheep too.

[@thinkinlinkinXI]

Can I just ask why did you need to look at the coil with a magnifying glass? I'm pretty sure he knows what he's doing

[@kostanz1]

Braid is tiny as hell, i've made this and you cant see the detail in it without magnification

[@firedog9113]

Sweet builds, can you do the first fish tail braid with kanthal?

[@firedog9113]

Ok, thanks for the info

[@Micropoint.]

i dont know if you know the *inowire* wire its french *x)* Google it. As core for slentre you can use inowire (very good) and use NI for the braid.

[@Micropoint.]

26 ga inowire/32 for the NI. perfect.

[@firedog9113]

Cool info, will check it out.

[@Micropoint.]

Np, kinda expansive for 5 meters of wire, but i only use the *inowire* as core for slentre so i can still do lot of slentre lol.

[@nicolaecotoi279]

Superrr,,,,,,👍

[@aries_9130]

Even with the best batteries, that build on the single 18650 tube mech isn't safe. Sorry guys, dunno what to think about that.

[@Vapepassion]

Agreed, that's drawing around 42-52 amps from a single battery. Not safe.

[@RobPGamerVaper]

I know this is a bit off topic But I been Vaping on my TUGLYFE Parallel Box Mod for a long time now So I build mostly for that and I usually build pretty Low I get a Nice hot Cloudy Vape but Now when I try Building for my LIMITLESS Mech I cant seem to produce enough Vapor and of course I have tried simple builds Like 24g AN80 N80 and TM80 5 wrap 2mm-3mm i.d Ive Tried Twisted and Parallel as well some of my builds have been Ohm'ed out at 0.15-0.01 Lots of Airflow to Minimal No luck Maybe it's my Batteries - LgHb6 ??

[@GiftedGrizzly]

Limitless doesn't perform very well, so try another Mech such as the Subzero

[@RobPGamerVaper]

That's the sad part It was beyond good before I started using the Tugboat I had the tugboat v2 and plume veil and also rementry rdas on it all great performance! Now, I've tried the Subzero I have the same issue with all of my single 18650 mechs Paragon, Rig, Subzero and SMPL and the best 2 was the SMPL and Limitless third was the Subzero

[@GiftedGrizzly]

somethings not right if you are getting sub par performance with the rig and subzero.

[@RobPGamerVaper]

Tyler Kinch And besides I prefer the limitless due to its style and custom sleeve option and Do not like the AV Just my opinion Limitless looks way cooler though the AV has a much better designed switch

[@IntelligentlyStupid]

did you say a .01 wtf sorry dude but that's fucking retarded to ever build that low if you want a great build with plenty of vapor and flavor try a staple coil it's a 0.5 × 5-8 ribbon stacked vertically, Clapton with a 36-38 gauge nichrome 80 wire on a 2.4- 2.5 mm bit 5 wrap and ohms out around .10-.12 best flavor and clouds I've ever had. Or try a fused Clapton 26×2 core nichrome 80 Clapton with a 36 gauge nichrome 80 on a 2.5 mm bit 6 wrap and ohms out around .14-.16 and that produces more vapor but loses just a little bit of flavor but either way those two builds are probably the best for flavor and cloud production.

[@РусланСенчуров]

!!!!!!!!!!

[@alexisboucher9058]

I have a question did he pass the core throught the lead or he just pass the leads all down between the core

[@andrewvillanueva8286]

alexis boucher all down between

[@nicolaecotoi279]

Gud

[@oswaldoarriaga4282]

Hi!!

[@richardpeterson3753]

very nice

[@gestenter]

Wire maniac

[@nicolaecotoi279]

👍😉✌️

[@pappysauce7959]

Bad Ass!

[@martinfletcher9699]

0.08ohm guys like him are why they want us off vaping he is pushing that battery waaaaay more than its continous amp limt

[@RuanBotha]

We should get people to stop modifying their cars for more speed and also stop surfers looking for that ultimate wave and....... STFU

[@sammysomething2922]

Teach me bro teach me

[@VikingRacer]

what tube mod is that, awesome video as usual definitely gonna give this a try @wildwestvape on IG

[@ejejjeje]

Looked like the SOI = Sub Ohm Innovations I have two of them I like them so much.

[@VikingRacer]

yea that's what I was thinking it was just wasn't sure

[@JKLOL267]

first comment

[@tonyfackavelli1420]

Hmmm.... yup, think it's bout time to tackle more braid variations Great content, per usual man. (antlerssixtythree on Insta)

[@skvltdmedia]

When modding their Subarus stops being cool...

[@grahamfam9551]

squidoode looks pissed ,why you look mad at your boy the whole time man, I seen videos of you joking around with the boys, makes a better video vaping is love love is vaping!!!

[@TheArtofVaping]

I can assure you I was more exhausted than anything but I can understand how it looks! Love the community and collaborations whole reason I spend so much time doing these.... We all have an off day! :)

[@grahamfam9551]

The Art of Vaping thanks for writing me back, kinda working on a new build myself it's so fucking hard I mostly watch your videos for inspiration, really, but if I come up with something new or even if it's not and I didn't know the build exist I would love to show you first, I just know you wouldn't criticize me and let me know truthfully! if that's cool?

[@TheArtofVaping]

Of course man! Constructive Criticism is something we all need!

[@nicolaecotoi279]

Very nice