When will the 4x 4.0 energy sets coming to America?
@GrahamWhelan10 ай бұрын
Always appreciate Rick and Chris’ videos.
@bradb829210 ай бұрын
I really like the portable "cabinet" for nesting the MFT. You mentioned you would link the video to that build, but I didn't see a link to it. Great video, keep them up!
@angler126210 ай бұрын
Yes I would like to see that video as well.
@PGore989410 ай бұрын
Ditto here!
@festoolusa10 ай бұрын
Just added it to the description, our apologies! you can find it here: kzbin.info/aero/PLpBJfh9Law-DIlFuUlPGnwWeYpmjulIjy
@mahmut12345610 ай бұрын
Wow that was pretty informative actually. Thank you 👍
@festoolusa10 ай бұрын
Glad you enjoyed it! We hope to do more like this!
@geoffwatson663810 ай бұрын
We just got 3 kapex saws at our store, the warranty cards are in a packing slip on the side of the actual box. Don't throw your boxes out!
@KARLOB845 ай бұрын
Any plans on expanding the 12v range of tools
@dereklong80110 ай бұрын
Any timeline for moving the drill systainers to the attic DF versions as mentioned? That's definitely a positive development.
@festoolusa10 ай бұрын
They are already moving over to that! Our latest drills come with the attic systainers
@Benmeglei110 ай бұрын
I had my fingers crossed the entire time hoping that someone would ask this but no luck. Any chance of an update MFT3 in the future. I understand new products are top secret but just blink once for yes and I’ll understand. Thank you.
@festoolusa10 ай бұрын
Hi there! As far as we know, there is no planned change or update to the MFT/3. What updates would you be interested in seeing?
@debandmike33808 ай бұрын
why doesn't the Kapex 60 stand set come in imperial like the 120 does. Once you figure that out I will buy the whole saw and stand set unless I lose interest first. The dealers arent smart enough to know they could just swap out one of the boxes.
@damianenslow31412 ай бұрын
what’s the best grit sand paper for drywall what’s the p320 for
@FryChicken9 ай бұрын
"What do you want a 3" sander for".... For a workpiece that's smaller than 5 or 6"? I kind of like the idea of a small sander. I know car painting people would like them.
@dynamicsx10 ай бұрын
Would love to have a Vac Sys. Unfortunately it was discontinued before I found Festool.
@boomvader9 ай бұрын
Great Q & A!
@festoolusa9 ай бұрын
Glad you enjoyed it!
@carbb57609 ай бұрын
Good video- any chance of seeing either and updated hkc saw OR a tsc60. The fsk functionality is incredibly useful but the hkc really needs a refresh so it can become more of an everyday saw
@festoolusa9 ай бұрын
Hi there! At this moment there are no updates to share, however the HKC has different sawblade options that can expand its functionality greatly! I will go ahead and pass this feedback along to our product team!
@carbb57609 ай бұрын
@@festoolusa hopefully either in cordless with the 168mm blade just to unify the system for people who have a csc50. You’ve made a great cordless table saw that runs those blade so hopefully that can be transferred to either of or both of those saws
@Dan-qk4ns10 ай бұрын
I Love and have alot of festool tools. With that said.....it seems Festool is usually 'late' to the game! I'd like to see them offer much more items. I have Milwaukee for most my day to day construction tools, but would love to see festool having more options.
@festoolusa10 ай бұрын
Thank so much for the feedback! We are always working on expanding, are there any products in particular you would hope to see that i can pass along as a suggestion to our product team?
@mathman010110 ай бұрын
We need much improved fences for the new table saw and kapex to allow less play and ability to cut a much greater variety of trim and mouldings.
@festoolusa10 ай бұрын
Thank you for the feedback! I will pass this along to the product team to take note, sometimes updates take a while but we are always looking to improve!
@mathman010110 ай бұрын
@@festoolusa thanks festool I think we would also appreciate tips and tricks that if something has a little play can we do a minor fix with a clamp or some other tool to stabilize it further until a full engineering solution is worked out. The Kapex fence needs to be higher I know Kazen does a higher fence to accommodate larger crown. Festool has to aim higher than other manufacturers it reinforces the better quality tool. We also like more accuracy of cuts and very tight tolerances that level of engineering excellence is what we are after.
@canadianstevo9 ай бұрын
Thank you for the great video. Instead of having to buy so many different parts and pieces, this Festool Centrotec Kit (576804) I really wish was still available. It makes so much sense to offer something like this to enable someone to have an all in one option. Any chance there is an option to bring something like this back, especially in Canada? :) Thank you
@festoolusa9 ай бұрын
Thank you for the suggestion! I'll pass it along to our Product team!
@repbydesign1610 ай бұрын
Great vid guys!!
@charlevoix41810 ай бұрын
My TS55 is burning the edge of 15mm baltic birch plywood when cutting it: any idea of the reason why?
@festoolusa10 ай бұрын
We recommend calling our applications specialist to see if they can help troubleshoot the issue! you can reach them 8-5pm et mon-fri at 888-337-8600
@troyqueen950310 ай бұрын
I think all new sanders should be like the plane x light system.👍🇨🇦
@festoolusa10 ай бұрын
Interesting idea! Thank you for the suggestion, I will pass it along to our product team!
@danielkelly595910 ай бұрын
Have asked several times why does Festool not sell their belt sander in the USA AND and have never received an answer
@festoolusa10 ай бұрын
Hi there! Unfortunately, the cost of the design, production etc of bringing the EU version to North America outweighs the limited interest. Ultimately, it's just not economically feasible, and we'd like to focus our limited resources in other areas. Luckily, our Rotex can fill in for many of the applications of a belt sander like scribing and stock removal. Short answer - it's really a business decision to not bring the belt sander over to this market.
@Thomas-mc2gy10 ай бұрын
I bought a early Domino, have you come up with a solution to fence creep? I gave it to my cousin and warned him about creep.
@gharel39610 ай бұрын
You can get replacement knobs that can be pulled back and tightened more. Sedge made a video about it, it's a great upgrade!
@RUM12310 ай бұрын
Look up the Seneca domiplate.
@tpolarich603910 ай бұрын
I know about Seneca and they are still selling them so it implies that Festool is still selling a very expensive tool that is defective!!! I wish the Festool dudes replied.
@RUM12310 ай бұрын
@tpolarich6039 I think you're reading too much into it. Mine doesn't drift, and I have a very recent build. The domiplate still has life in it, if you're strictly production based or only use certain thickness sheet goods.
@murphyrp0110 ай бұрын
Corded version are always better than cordless. Don’t supported companies that focus on battery power. I hope everyone realises that in 5 years time Festool and other companies with change the battery connection method and then want you to buy all new tools. It’s a scam.
@AaronGeller10 ай бұрын
Nah.
@workinhard238 ай бұрын
MORE BATTERIES FOR ME
@barryh885710 ай бұрын
I sure wish you two would host “Festool Fridays”. I watched this whole video to the end. I can’t make it past 1 minute with the other clown….
@workinhard238 ай бұрын
Dang Barry. Sounds like you need to have a coke and a smile